On Wed, Jun 20, 2007 at 01:27:22AM -0400, Brian A. Seklecki wrote:
> Very bizarre. The only advice I can offer is that maybe it's getting
> confused on "-> $nat_if" instead of the more-pragmatic "-> ($nat-if)".
The above worked!
Doesn't make sense though. According to pf.conf(5):
nat-rule
Very bizarre. The only advice I can offer is that maybe it's getting
confused on "-> $nat_if" instead of the more-pragmatic "-> ($nat-if)".
Perhaps the parse code is trying too hard to resolve $nat_if in the
former, and thus finding the underlying interface instead of the logical
upper layer
I have a perfectly-working 4.0 firewall and decided to move one of the
physical interfaces to a new vlan tagged interface. I changed the
interface name in pf.conf and noticed that NAT wasn't working. The NAT
rule is:
nat_if = "vlan109"
table const { 192.168.1.0/24, 192.168.4.0/24, 10.191.57.0/
hi list,
i thought i would set up a small machine that would manage the adsl link
and also would be a wireless accesspoint. i bought a via epia board for
that that has one pci slot, one on board ethernet interface (vr) and one
pcmci slot. a searched for a pcmcia card that is supported and foun
This is part of the strong psuedo-random number generator:
$ grep -ir enqueue_randomness /usr/src/sys/*
/usr/src/sys/dev/rnd.c:enqueue_randomness(state, val)
/usr/src/sys/dev/rndvar.h:#define add_true_randomness(d)
enqueue_randomness(RND_SRC_TRUE, (int)(d))
/usr/src/sys/dev/rndvar.h:#defi
Hello,
I try to install OpenBSD on a PX-EH 160Gb.
I have found a cable for the serial console port, but I do not know how to
connect it. The bard has the 4 holes as described: It seems I need to some
soldering...
I was wondering if it is possible to install everything from an other
computer and
Luca Losio wrote:
Hi all,
I'm having a lot of crashes with my 4.1 since I updated from 4.0 ...the
console output is:
page fault trap code=0
stopped at enqueue_randomness+0xc5addb%al,0(%eax)
ddb>
I tried checking the RAM (Memtest runned 20 hours withour any error and I
used this box wit
Funny, my GENERIC kernel gives me:
OpenBSD 4.1 (GENERIC) #1435: Sat Mar 10 19:07:45 MST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
Try downloading bsd from ftp.openbsd.org/pub/OpenBSD/4.1/i386 and
replace the one you have and see what happens
On 6/19/07, Luca Losio <[EMAIL
I think your hard disk is not showing good messages ;)
Cables? HD dying?
Luca Losio wrote:
Hi all,
I'm having a lot of crashes with my 4.1 since I updated from 4.0 ...the
console output is:
page fault trap code=0
stopped at enqueue_randomness+0xc5addb%al,0(%eax)
ddb>
I tried checking
Luca Losio wrote:
Hi all,
I'm having a lot of crashes with my 4.1 since I updated from 4.0 ...the
console output is:
page fault trap code=0
stopped at enqueue_randomness+0xc5addb%al,0(%eax)
ddb>
I tried checking the RAM (Memtest runned 20 hours withour any error and I
used this box wit
After the install, everything working now.
Summary
disks:
wd0 300GB sata
wd1 40GB pata
wd2 30GB pata
wd2 is boot disk as wd0 is reserved for virtual tape drives and will
be erased frequently.
The bios on this Dell Dimension 2400 is stupid, so I just avoided it
by installing GAG boot manager http:/
Hi all,
I'm having a lot of crashes with my 4.1 since I updated from 4.0 ...the
console output is:
page fault trap code=0
stopped at enqueue_randomness+0xc5addb%al,0(%eax)
ddb>
I tried checking the RAM (Memtest runned 20 hours withour any error and I
used this box with another ram stick)
Having a linux background (and a limited NetBSD experience), i
expected to find linker scripts in the kernel source code.
However, this is simply not true for most architectures. What is
the logic behind the lack of linker scripts?
Thanks,
Constantine
work good with single core (boot bsd), i send the error because i think the
error is MP(boot bsd.mp)
thanks
On 6/19/07, Miod Vallat <[EMAIL PROTECTED]> wrote:
>
> > Hi
> > When OpenBSD 4.1 running in MP(bsd.mp) mode and I make "wget -m" loses
> the
> > connection of the network card vr0.
>
> Hi
> When OpenBSD 4.1 running in MP(bsd.mp) mode and I make "wget -m" loses the
> connection of the network card vr0.
^^^
Have you considered buying a network card for your machine?
Miod
Hi
When OpenBSD 4.1 running in MP(bsd.mp) mode and I make "wget -m" loses the
connection of the network card vr0.
Reviewing /var/log/messages it indicates the following error:
Jun 15 22:16:31 prueba /bsd: dkcsum: wd0 matches BIOS drive 0x80
Jun 15 22:16:31 prueba /bsd: root on wd0a
Jun 15 22:16:
You should be able to find a better system than this.. I bought a
Shuttle SN25P that runs OpenBSD very nicely. There are only a few
issues. The on-board sound (some Via Envy24 chipset) doesn't work. It
doesn't really matter because I use a M-Audio MobilePre (for tracking
guitar stuff) that is conn
Karel Kulhavy <[EMAIL PROTECTED]> writes:
> A friend who is happening to write his own operating system just pointed out
> to me that a keyboard driver cannot use
>
> - lookup tables, because timing accessing these lookup tables would yield
> information what key was pressed when entering a roo
On 6/18/07, Juan Miscaro <[EMAIL PROTECTED]> wrote:
Hi gang,
I would like to run VMware on Linux and use OpenBSD as a VM to act as
my Internet gateway (pf, postfix, spamfilter). I will have another
Linux VM or two that will act as fileserver and lan services. I would
like to provide internet a
OK, I have some question about the ktrace. The first notable call is the
following:
> 20188 MathKernel CALL mprotect(0xcfbc1000,0x1000,0x107)
> 20188 MathKernel RET mprotect -1 errno 22 Invalid argument
In OpenBSD, the only legal values for the third argument of mprotect are
the bitwi
2007/6/18, Juan Miscaro <[EMAIL PROTECTED]>:
Hi gang,
I would like to run VMware on Linux and use OpenBSD as a VM to act as
my Internet gateway (pf, postfix, spamfilter). I will have another
Linux VM or two that will act as fileserver and lan services. I would
like to provide internet access t
Hi
2007/6/19, Alberich de megres <[EMAIL PROTECTED]>:
Thanks that helps me.
which is better ( less cpu overwelm )? pfctl -x misc or loud?
Taking a look at pflog, i see something like: match rule 6 block in em0
How can i see which rule is rule 6?
man pfctl
pfctl -vvsr
Thanks that helps me.
which is better ( less cpu overwelm )? pfctl -x misc or loud?
Taking a look at pflog, i see something like: match rule 6 block in em0
How can i see which rule is rule 6?
Thanks!
On 6/18/07, Brian A. Seklecki <[EMAIL PROTECTED]> wrote:
>
> see the "-x" argument to pf
atstake atstake wrote:
On 6/18/07, Fred Crowson <[EMAIL PROTECTED]> wrote:
What you want is:
dhcp none none none nwid "my_SSID" nwkey P789J497CA
Thanks. but leaving out 0x fails to receive an IP address on the wpi0
interface. This is what it says -
DHCPREQUEST on wpi0 to 255.255.255.255
DHCPR
"atstake atstake" <[EMAIL PROTECTED]> writes:
> It seems like the problem is with the routing table. During boot up,
> the ethernet card - em(4) - gets DHCP offer before wpi0 and so default
> route is set on em0 and _not_ on wpi0. Is there any way to set the
> default route on both the interfaces?
A friend who is happening to write his own operating system just pointed out
to me that a keyboard driver cannot use
- lookup tables, because timing accessing these lookup tables would yield
information what key was pressed when entering a root password
- tests and jumps, because the same would
On 6/19/07, atstake atstake <[EMAIL PROTECTED]> wrote:
On 6/18/07, Fred Crowson <[EMAIL PROTECTED]> wrote:
> What you want is:
> dhcp none none none nwid "my_SSID" nwkey P789J497CA
It seems like the problem is with the routing table. During boot up,
the ethernet card - em(4) - gets DHCP offer b
On 6/18/07, Fred Crowson <[EMAIL PROTECTED]> wrote:
What you want is:
dhcp none none none nwid "my_SSID" nwkey P789J497CA
Thanks. but leaving out 0x fails to receive an IP address on the wpi0
interface. This is what it says -
DHCPREQUEST on wpi0 to 255.255.255.255
DHCPREQUEST on wpi0 to 255.25
last time i checked the only port of obsd to xen was foo (far from
production ready).
On 6/19/07, David Greenberg <[EMAIL PROTECTED]> wrote:
Where can I find this project, or more specifically a working kernel
source/binary image or an entire Xen domU image? Thanks!
David
--
almir
29 matches
Mail list logo
