On 3 éÀÎØ 2002 23:31, Herbert Voss wrote:
> Vitaly Lipatov wrote:
> >>this is wrong! You can have only one (!) alignment which
> >>belongs to the definition in the classfile. If you
> >>change the alignement to center then LyX does it like
> >>for other paragraphs too, and this is wrong for captio
On Mon, Jun 03, 2002 at 09:42:32PM -0400, Laurent Duperval wrote:
> This is what I've got. I even did a remove and an update but still no
> dice. :-( THe code looks like this:
>
> #include "graphics/GraphicsImage.h"
> #include FORMS_H_LOCATION
> #include
I don't remember committing anything l
On 3 Jun 2002, Jean-Marc Lasgouttes wrote:
> > "Rod" == Rod Pinna <[EMAIL PROTECTED]> writes:
>
> Rod> Herbert had the newer version of the one I had, and his looked
> Rod> fine. If Herbert can't find it, I have a copy of his version
> Rod> which I should be able to dig up. I haven't had a c
On 4 Jun, John Levon wrote:
> On Mon, Jun 03, 2002 at 05:06:32PM -0400, Laurent Duperval wrote:
>
>> The following problems have been detected by configure.
>> Please check the messages below before running 'make'.
>> (see the section 'Problems' in the INSTALL file)
>>
>> ** Cann
On Mon, 3 Jun 2002, Niklaus Giger wrote:
> As I have a german language setting, e.g. LANG=de_CH. I get
> the following errors:
> >In AddtoFolder [tabfolder.c 320] No space left for folder
> >Diverses
> >In AddtoFolder [tabfolder.c 320] No space left for folder
> >CJK Fonts
> I find nowhere i t
On Mon, Jun 03, 2002 at 05:06:32PM -0400, Laurent Duperval wrote:
> The following problems have been detected by configure.
> Please check the messages below before running 'make'.
> (see the section 'Problems' in the INSTALL file)
>
> ** Cannot find flimage.h. Please check that t
Hi,
I did an autogen and all yet when I try to compile from CVS, I get these
errors:
checking for sstream... yes
checking for locale... no
checking for limits... no
checking for modern STL streams... no
./configure: LYX_REGEX: command not found
checking for sin in -lm... yes
checking for fopen i
Am Donnerstag, 30. Mai 2002 03.18 schrieb
[EMAIL PROTECTED]:
> Hello,
>
> We are relieved to have it official the CJK-LyX-1.2.0 at
> the ftp site, ftp://stone.phys.pusan.ac.kr/pub/CJK-LyX
Thank you very much for your great work.
I compiled CJK-LyX 1.2 on my Debian GNU/Linux system.
On startup I
Vitaly Lipatov wrote:
>>this is wrong! You can have only one (!) alignment which
>>belongs to the definition in the classfile. If you
>>change the alignement to center then LyX does it like
>>for other paragraphs too, and this is wrong for captions.
>>
> I understand it, but I need different alig
On 2 éÀÎØ 2002 20:18, Herbert Voss wrote:
> Vitaly Lipatov wrote:
> > In LyX 1.1.6 I use modified style definition for Caption.
> > There is define
> > AlignPossible Left,Center
> > in definition I used.
> > I was possible to change alignment for Left to Center.
> > LyX 1.2.0 with center ali
On Mon, 3 Jun 2002, Herbert Voss wrote:
> multicolumn in the table makes only sense, if you have _really_
> multicolumns or something special in the table. But you wanted
> only a fixed wisth with left alignment.
Herbert,
This is true. I could not enter a fixed width without the multicolum
s
On Mon, Jun 03, 2002 at 02:20:44PM -0400, Edwin Chiu wrote:
> On Mon, 2002-06-03 at 13:39, Dekel Tsur wrote:
> Yes... this seems to do the trick, but I can't figure out how to do more
> than one character? How do I negate an entire word?
It is not supposed to be used like that.
If you want a diag
On Mon, Jun 03, 2002 at 05:42:44PM +0200, Candide Kemmler wrote:
> I have a second simple question also: I want to use noweb but I would
> like to hide some code for weaving while still having it tangled: things
> like class declarations, import statements and the like... Any idea of
> how to do t
On Mon, Jun 03, 2002 at 06:00:19AM -0700, Rich Shepard wrote:
>
> 1) I want to separate the table from the body of the text. But, I want a
> table caption, preferably above the table. So far, it's just another
> paragraph.
Use a table float (Insert->Floats->Table float).
> 2) The table has 2 co
On Sun, Jun 02, 2002 at 01:51:51PM -0400, Edwin Chiu wrote:
> I was using LyX 1.1.6fix4 and I was typing a math expression like:
>
> G^treq F
>
> But I had pressed some key combination and the "treq" was crossed-out,
> from the bottom-left corner to the top-right corner. I have no idea how
> I
On Mon, Jun 03, 2002 at 10:51:01AM +0200, [EMAIL PROTECTED] wrote:
> i am in the middle of my diplom thesis and i want to switch my document to
> arial!
Yuck (IMHO).
> However i somehow can't set my complete font to arial/sans serif, only the
> paragraphs. The date at the beginning and my page n
El Lun 03 Jun 2002 11:10, escribió:
> Osvaldo Fornaro wrote:
> > I have a figure in eps format, which must be rotated 90 degrees
> > un-clockwise. Doing this in LyX, it shows right in dvi but inverted (-90)
> > in LyX editor.
>
> do you really want to say that this is right rotated in the
> LyX wo
El Lun 03 Jun 2002 11:21, escribió:
> > "Herbert" == Herbert Voss <[EMAIL PROTECTED]> writes:
>
> Herbert> Osvaldo Fornaro wrote:
> >> I have a figure in eps format, which must be rotated 90 degrees
> >> un-clockwise. Doing this in LyX, it shows right in dvi but inverted
> >> (-90) in LyX edit
Remzi Seker wrote:
> Thanks alot... This somehow works, however, how do I get rid of the number?
> It says
> 1. my chapter name
> etc... I need to get rid of the number. I checked the koma help but I
> couldn't see anything related to it. I know I can use chapter* but then I
> need to set the
Rich Shepard wrote:
>>this is the point: without the lyx-file or the exported tex it's not
>>possible to say what's going here. It's obvious that the code is wrong and
>>that you forget a } or something else.
>>
>
> This is my point: I've not put in any LaTeX code, just selected table from
> t
>>From: Andre Poenitz <[EMAIL PROTECTED]>
>>Date: Mon, 3 Jun 2002 17:58:50 +0200
>>To: Rich Shepard <[EMAIL PROTECTED]>
>>Cc: [EMAIL PROTECTED]
>>Subject: Re: Working with tables
>>X-message-flag: Formating hard disk. please wait... 10%... 20%...
>>X-Virus-Scanned: by AMaViS perl-11
>>
>>On Mo
On Mon, Jun 03, 2002 at 06:00:19AM -0700, Rich Shepard wrote:
> 1) I want to separate the table from the body of the text. But, I want a
> table caption, preferably above the table. So far, it's just another
> paragraph.
I think you get only captions if you put the table in a float.
I am not sure
Thanks alot... This somehow works, however, how do I get rid of the number?
It says
1. my chapter name
etc... I need to get rid of the number. I checked the koma help but I
couldn't see anything related to it. I know I can use chapter* but then I
need to set the counters for captions and also e
On 3 Jun 2002, Jean-Marc Lasgouttes wrote:
> WHich version of xforms is that? What does 'lyx -version' say? I seem
> to remember that there were problems in the xofmrs image loader with
> some special angles (maybe I am just making this up).
Isn't it the problem of rotating image already solved
On Mon, 3 Jun 2002, Herbert Voss wrote:
> > 2) The table has 2 columns and 5 rows. I figured out (by reading and
> > trial-and-error) how to make the right-hand column cells multi-line and left
> > justified while the heading for that column is centered. I did this by
> > highlighting the text in
On 3 Jun, [EMAIL PROTECTED] wrote:
> However i somehow can't set my complete font to arial/sans
> serif, only the paragraphs. The date at the beginning and my
> page numbers still are in courier
> and i have to set each section to sans serif over and over
> again when writing.
Set Layout/Documen
lyx 1.1.6fix4
I have this very annoying bug since this morning: the cursor refuses to
get back when hitting the left arrow key, or to select back a word
(ctrl-shift-left arrow). What's weird is that it occured all at once as
I am working on the same document since the beginning of last week (but
> "Herbert" == Herbert Voss <[EMAIL PROTECTED]> writes:
Herbert> Osvaldo Fornaro wrote:
>> I have a figure in eps format, which must be rotated 90 degrees
>> un-clockwise. Doing this in LyX, it shows right in dvi but inverted
>> (-90) in LyX editor.
Herbert> do you really want to say that t
>>NO, but it's a fairly requent question, should be
>>answered in Herbert's help
>>http://www.lyx/org/help/
^ oops, a dot here of course
http://www.lyx.org/help/
Sorry
--
Jean-Pierre
Osvaldo Fornaro wrote:
>
> I have a figure in eps format, which must be rotated 90 degrees un-clockwise.
> Doing this in LyX, it shows right in dvi but inverted (-90) in LyX editor.
do you really want to say that this is right rotated in the
LyX workarea?
Herbert
--
http://www.lyx.org/hel
> \renewcommand{\rmdefault}{\sfdefault}
Thanks! That solved it! Maybe i will try helvetica, too!!!
Ulrich
--
GMX - Die Kommunikationsplattform im Internet.
http://www.gmx.net
--
GMX - Die Kommunikationsplattform im Internet.
http://www.gmx.net
Rich Shepard wrote:
> 2) The table has 2 columns and 5 rows. I figured out (by reading and
> trial-and-error) how to make the right-hand column cells multi-line and left
> justified while the heading for that column is centered. I did this by
> highlighting the text in each cell in that column, o
Remzi Seker wrote:
> I tried that before I cried for help :-) but it didn't work. let me paste the
> preamble in here:
>
> \usepackage{sectsty}
> \chapterfont{\mdseries\centering}
[...]
when using scr-book delete the stuff with chapterhead
> \def\@makechapterhead#1{%
> \vspace*{5
>>Date: Mon, 3 Jun 2002 15:45:37 +0200 (MEST)
>>From: [EMAIL PROTECTED]
>>To: [EMAIL PROTECTED]
>>Subject: second try
>>X-Authenticated-Sender: #[EMAIL PROTECTED]
>>X-Authenticated-IP: [213.218.4.11]
>>X-Flags: 0001
>>
>>Hello again,
>>
>>i used the tex preamble and modified it to use sffamily. H
Title: Something different !!!
Do
You Want
S
Hello again,
i used the tex preamble and modified it to use sffamily. However, it doesn't
show up as Sans serif?
should i ask on a latex mailing list?
Ulrich
-
%% LyX 1.1 created this file. For more info, see http://www.lyx.org/.
%% Do not edit unless you really kn
This message was posted last Thursday and I'm rather surprized that no one
has responded to my request for help. Did I not clearly explain my problem?
I would greatly appreciate some pointers to working with tables in an
article class document.
I've just encounted the need for a table in an a
I tried that before I cried for help :-) but it didn't work. let me paste the
preamble in here:
\usepackage{sectsty}
\chapterfont{\mdseries\centering}
\sectionfont{\mdseries\centering}
\subsectionfont{\mdseries\textit}
\subsubsectionfont{\mdseries\textit}
\paragraphfont{\mdseries\textit}
Hi list,
I have a figure in eps format, which must be rotated 90 degrees un-clockwise.
Doing this in LyX, it shows right in dvi but inverted (-90) in LyX editor.
Is this a know behavior?
Osvaldo.
--
Dr. Osvaldo Fornaro <[EMAIL PROTECTED]>
Universidad Nacional del Centro de la Provincia de B
Curtis Osterhoudt wrote:
>1) The figures, which are .eps files, do not display correctly in the
>LyX
> screen (something like "Error: could not convert file format" shows up).
> This was not a problem in 1.1.6fix4. An earlier post mentioned something
> like this; the user's manual mention
On Mon, 2002-06-03 at 11:38, Jean-Marc Lasgouttes wrote:
> > "John" == John Levon <[EMAIL PROTECTED]> writes:
>
> John> On Fri, May 31, 2002 at 08:20:39PM -0400, Chris Herrnberger
> John> wrote:
> >> Just finished compiling lyx from source and using cups/Krpint as
> >> the print mechanism. Fo
The email is in my in tray, I should get to it in the next few days.
Rod
On 3 Jun 2002, Jean-Marc Lasgouttes wrote:
> > "Rod" == Rod Pinna <[EMAIL PROTECTED]> writes:
>
> Rod> Herbert had the newer version of the one I had, and his looked
> Rod> fine. If Herbert can't find it, I have a co
Help,
i am in the middle of my diplom thesis and i want to switch my document to
arial!
However i somehow can't set my complete font to arial/sans serif, only the
paragraphs. The date at the beginning and my page numbers still are in
courier
and i have to set each section to sans serif over and
> "Rod" == Rod Pinna <[EMAIL PROTECTED]> writes:
Rod> Herbert had the newer version of the one I had, and his looked
Rod> fine. If Herbert can't find it, I have a copy of his version
Rod> which I should be able to dig up. I haven't had a chance yet to
Rod> look at the contribution from Matthe
> "John" == John Levon <[EMAIL PROTECTED]> writes:
John> On Fri, May 31, 2002 at 08:20:39PM -0400, Chris Herrnberger
John> wrote:
>> Just finished compiling lyx from source and using cups/Krpint as
>> the print mechanism. For some reason, C-p (printing) seems to be
>> disabled now matter what
Herbert had the newer version of the one I had, and his looked fine. If
Herbert can't find it, I have a copy of his version which I should be able
to dig up. I haven't had a chance yet to look at the contribution from
Matthew, so I can't comment.
Rod
On 3 Jun 2002, Jean-Marc Lasgouttes wrote:
> "John" == John Levon <[EMAIL PROTECTED]> writes:
John> On Thu, May 23, 2002 at 06:25:16PM +1000, matthew arnison wrote:
>> I have made up a basic LyX layout file and template to support the
>> Elsevier preprint class (elsart.cls). They're online at
>> http://www.physics.usyd.edu.au/~matthew
Yann Collete wrote:
> \renewcommand{\ALG@name}{algorithme}
is this command in the preamble or part of the
text?
Herbert
--
http://www.lyx.org/help/
48 matches
Mail list logo
