Signed-off-by: Stephen Rothwell <[EMAIL PROTECTED]>
---
drivers/watchdog/mpc5200_wdt.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/watchdog/mpc5200_wdt.c b/drivers/watchdog/mpc5200_wdt.c
index 80a91d4..77c1c2a 100644
--- a/drivers/watchdog/mpc5200_wdt.c
+++ b
On Fri, May 23 2008, Stephen Rothwell wrote:
> I don't use my IBM email address normally and people can find me in
> CREDITS.
>
> Signed-off-by: Stephen Rothwell <[EMAIL PROTECTED]>
> ---
> drivers/block/viodasd.c |2 +-
> drivers/cdrom/viocd.c |2 +-
> drivers/char/viocons.c |2 +-
On May 23, 2008, at 1:28 AM, Stephen Rothwell wrote:
Signed-off-by: Stephen Rothwell <[EMAIL PROTECTED]>
---
drivers/net/fs_enet/fs_enet-main.c |2 +-
drivers/net/fs_enet/mac-scc.c |2 +-
drivers/net/fs_enet/mii-fec.c |2 +-
drivers/net/ibm_newemac/core.h |2 +-
drive
On Thu, 1 May 2008 09:36:43 am Becky Bruce wrote:
>
> I essentially adopt the 64-bit dma code, with some changes to support
> 32-bit systems, including HIGHMEM. dma functions on 32-bit are now
> invoked via accessor functions which call the correct op for a device based
> on archdata dma_ops. Cu
> On May 22, 2008, at 9:15 PM, Jin Zhengxiong wrote:
>
> > Hi, Kumar,
> >
> > So I should change the MSI hwirq num according to this change, The
> > patches will be send after this changes updated to your tree. How
> > about applying the MSI driver firstly?
>
> I've asked Paul to pick up thi
Binding document adding for Freescale MSI support.
Signed-off-by: Jason Jin <[EMAIL PROTECTED]>
---
In this version:
The example node changed due to the hwirq num change of MSI.
Documentation/powerpc/booting-without-of.txt | 43 +-
1 files changed, 42 insertions(+), 1 d
This patch enable the MSI on 8610hpcd board.
Through the msi-available-ranges property, All the 256
msi interrupts can be tested on this board.
Signed-off-by: Jason Jin <[EMAIL PROTECTED]>
---
In this version:
Add a flag MPIC_BROKEN_FRR_NIRQS in mpic_alloc making the mpic use
irq_count instead of
This MSI driver can be used on 83xx/85xx/86xx board.
In this driver, virtual interrupt host and chip were
setup. There are 256 MSI interrupts in this host, Every 32
MSI interrupts cascaded to one IPIC/MPIC interrupt.
The chip was treated as edge sensitive and some necessary
functions were setup for
This patch enabled MSI on 8544ds and 8572ds board.
So far only one MSI interrupt can generate on 8544 board.
Signed-off-by: Jason Jin <[EMAIL PROTECTED]>
---
In this version:
Add a flag MPIC_BROKEN_FRR_NIRQS in mpic_alloc making the mpic use
irq_count instead of FRR[NIRQ] to initialize the interru
Hello Tejun,
Thanks for your review comments. Please find my answers below :
>> Broke the sata_fsl.c driver in 2.6.26. I know the following patch
>> fixes the issue, it clearly also adds port multipler support. I'm
not
>> sure if you are willing to take that as part of 2.6.26 or not, but
the
On Friday 23 May 2008, Stephen Rothwell wrote:
>
> Signed-off-by: Stephen Rothwell <[EMAIL PROTECTED]>
Acked-by: Arnd Bergmann <[EMAIL PROTECTED]>
___
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
On Wed, Apr 30, 2008 at 06:36:43PM -0500, Becky Bruce wrote:
> In addition, the dma_map/unmap_page functions are added to dma_ops on
> HIGHMEM-enabled configs because we can't just fall back on map/unmap_single
> when HIGHMEM is enabled. Adding these to dma_ops makes it cleaner to
> substitute dif
Linus,
Please pull from the 'merge' branch of
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc.git merge
to get some more small bug and warning fixes for powerpc (and one
commit that just updates some comments).
Thanks,
Paul.
arch/powerpc/kernel/prom_init_check.sh |2 +-
arch/
I have pushed the following commits to the powerpc-next and master
branches of the powerpc.git repository. I have also pulled in Linus'
tree plus the 5 commits that I have put on the merge branch and asked
Linus to pull.
Paul.
Anton Vorontsov (1):
[POWERPC] of/gpio: Use dynamic base alloca
"Specifying GPIO information for devices" should be IX-th section,
not VIII-th.
Thanks to David Brownell for noticing.
Signed-off-by: Anton Vorontsov <[EMAIL PROTECTED]>
---
Documentation/powerpc/booting-without-of.txt |6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a
On Fri, 2008-05-23 at 16:27 +1000, Stephen Rothwell wrote:
> Signed-off-by: Stephen Rothwell <[EMAIL PROTECTED]>
Acked-by: Benjamin Herrenschmidt <[EMAIL PROTECTED]>
> ---
> drivers/macintosh/smu.c |4 ++--
> drivers/macintosh/therm_adt746x.c|2 +-
> drivers/macintosh/
On Fri, 2008-05-23 at 16:39 +1000, Stephen Rothwell wrote:
> Signed-off-by: Stephen Rothwell <[EMAIL PROTECTED]>
Acked-by: Benjamin Herrenschmidt <[EMAIL PROTECTED]>
> ---
> drivers/video/platinumfb.c |4 ++--
> 1 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/vide
> > IE. Take an x86 version of that test, writing to memory, doing a writel
> > to some MMIO, then another memory write, can those be re-ordered with
> > the current x86 version of writel ?
>
> Yes, the same thing can happen on x86. As far as I could tell, this is
> something that all other arch
On Fri, 2008-05-23 at 08:36 -0400, Benjamin Herrenschmidt wrote:
>
> - mandate some kind of dma_sync_for_device/cpu on consistent memory.
> Almost no driver do that currently tho. They only do that for non
> consistent memory mapped with dma_map_*.
>
> - mandate the use of wmb,rm
On May 23, 2008, at 4:54 AM, Paul Mackerras wrote:
I have pushed the following commits to the powerpc-next and master
branches of the powerpc.git repository. I have also pulled in Linus'
tree plus the 5 commits that I have put on the merge branch and asked
Linus to pull.
Paul.
Anton Vorontso
On Fri, May 23, 2008 at 04:32:46PM +0800, Jason Jin wrote:
> This MSI driver can be used on 83xx/85xx/86xx board.
> In this driver, virtual interrupt host and chip were
> setup. There are 256 MSI interrupts in this host, Every 32
> MSI interrupts cascaded to one IPIC/MPIC interrupt.
> The chip was
Hello Grant,
You can reproduce this by adding initcall_debug to your kernel
parameters. I'm encountering this situation on an MPC85xx board, but
from looking at the code that seems irrelevant as add_pcspkr() will get
executed anyway. True, "pnpPNP,100" is looked after before the platform
code run
On May 23, 2008, at 7:59 AM, Anton Vorontsov wrote:
On Fri, May 23, 2008 at 04:32:46PM +0800, Jason Jin wrote:
This MSI driver can be used on 83xx/85xx/86xx board.
In this driver, virtual interrupt host and chip were
setup. There are 256 MSI interrupts in this host, Every 32
MSI interrupts cas
On May 23, 2008, at 3:32 AM, Jason Jin wrote:
Binding document adding for Freescale MSI support.
Signed-off-by: Jason Jin <[EMAIL PROTECTED]>
applied.
- k
___
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/li
On May 23, 2008, at 3:32 AM, Jason Jin wrote:
This patch enable the MSI on 8610hpcd board.
Through the msi-available-ranges property, All the 256
msi interrupts can be tested on this board.
Signed-off-by: Jason Jin <[EMAIL PROTECTED]>
applied.
- k
__
On May 23, 2008, at 3:32 AM, Jason Jin wrote:
This patch enabled MSI on 8544ds and 8572ds board.
So far only one MSI interrupt can generate on 8544 board.
What is the issue on 8544?
Signed-off-by: Jason Jin <[EMAIL PROTECTED]>
applied.
- k
___
On May 23, 2008, at 3:32 AM, Jason Jin wrote:
This MSI driver can be used on 83xx/85xx/86xx board.
In this driver, virtual interrupt host and chip were
setup. There are 256 MSI interrupts in this host, Every 32
MSI interrupts cascaded to one IPIC/MPIC interrupt.
The chip was treated as edge sen
Since AMCC now reports that the 460GT *has* an FPU, we should enable it
(again). This patch basically reverts my patch
acb0142bf01c0ebe18f09e37814451ee6a873e27 ([POWERPC] 4xx: Fix 460GT support
to not enable FPU), which disabled the FPU upon AMCC request.
Sorry about the confusion here.
Signed-of
В Fri, 23 May 2008 16:31:08 +1000
Stephen Rothwell <[EMAIL PROTECTED]> пишет:
>
> Signed-off-by: Stephen Rothwell <[EMAIL PROTECTED]>
Acked-by: Vitaly Bordug <[EMAIL PROTECTED]>
> ---
> drivers/pcmcia/electra_cf.c |2 +-
> drivers/pcmcia/m8xx_pcmcia.c |4 ++--
> 2 files changed, 3 inser
This patch fixes few cosmetic issues, also removes unused function,
makes some functions static and reduces #ifdef count.
Signed-off-by: Anton Vorontsov <[EMAIL PROTECTED]>
---
On Fri, May 23, 2008 at 08:02:39AM -0500, Kumar Gala wrote:
>
> On May 23, 2008, at 7:59 AM, Anton Vorontsov wrote:
>
>>
Hello,
I noticed that on my 405EP board (made in-house), the PCI Arbiter bit
is not set
in the CPC0_PCI register even though CPC0_PCI[PAE] bit 5 is set in the
serial EEPROM.
Other registers (PLL,...) bits are set correctly and got their value
from the IIC.
I check the value of I2C and CPC0_P
On Thu, May 22, 2008 at 02:18:17PM -0400, Steven Rostedt wrote:
>
> In rcupreempt, rcu_batches_completed_bh is defined as a static inline in
> the header file. This does not need to be exported, and not only that,
> this breaks my PPC build.
Good catch!!!
Reviewed-by: Paul E. McKenney <[EMAIL PR
This patch fixes following warning introduced by
commit 475ca391b490a683d66bf1a8a7a24913f139 (mpic: Deal with bogus NIRQ
in Feature Reporting Register):
CC arch/powerpc/sysdev/mpic.o
arch/powerpc/sysdev/mpic.c: In function ‘mpic_alloc’:
arch/powerpc/sysdev/mpic.c:1146: warning: suggest
Hello Michael,
> That won't work if CONFIG_DEBUG_FS is not defined, because in
> that case
> debugfs_create_file() returns -ENODEV.
Will respin.
Thanks,
Emil.
___
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/
On Fri, May 23, 2008 at 04:31:08PM +1000, Stephen Rothwell wrote:
>
> Signed-off-by: Stephen Rothwell <[EMAIL PROTECTED]>
Acked-by: Olof Johansson <[EMAIL PROTECTED]>
> ---
> drivers/pcmcia/electra_cf.c |2 +-
> drivers/pcmcia/m8xx_pcmcia.c |4 ++--
> 2 files changed, 3 insertions(+),
On Fri, May 23, 2008 at 04:20:05PM +1000, Stephen Rothwell wrote:
>
> Signed-off-by: Stephen Rothwell <[EMAIL PROTECTED]>
Acked-by: Olof Johansson <[EMAIL PROTECTED]>
> ---
> drivers/char/hw_random/pasemi-rng.c |2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
__
On Fri, 2008-05-23 at 08:02 -0500, Kumar Gala wrote:
> On May 23, 2008, at 7:59 AM, Anton Vorontsov wrote:
>
> > On Fri, May 23, 2008 at 04:32:46PM +0800, Jason Jin wrote:
> >> This MSI driver can be used on 83xx/85xx/86xx board.
> >> In this driver, virtual interrupt host and chip were
> >> setup
Hello Michael,
> > That won't work if CONFIG_DEBUG_FS is not defined, because in
> > that case
> > debugfs_create_file() returns -ENODEV.
>
> Will respin.
At a second glance in arch/powerpc/Kconfig.debug, VIRQ_DEBUG depends on
DEBUG_FS so I think that the patch should work as is.
Cheers,
Emi
On Fri, 2008-05-23 at 07:39 -0700, Medve Emilian wrote:
> Hello Michael,
>
>
> > > That won't work if CONFIG_DEBUG_FS is not defined, because in
> > > that case
> > > debugfs_create_file() returns -ENODEV.
> >
> > Will respin.
>
> At a second glance in arch/powerpc/Kconfig.debug, VIRQ_DEBUG de
On Thu, May 22, 2008 at 09:34:32PM +0200, Pierre Ossman wrote:
[...]
> > Ok. How about this version?
> >
>
> Perfect. Unless there is some way you can pass flags in platform data?
> Using the lack of an init() to determine the need for polling is a bit
> circumstantial.
Aha, that's an idea, than
Some hosts (and boards that use mmc_spi) do not use interrupts on the CD
line, so they can't trigger mmc_detect_change. We want to poll the card
and see if there was a change. 1 second poll interval seems resonable.
This patch also implements .get_cd() host operation, that could be used
by the hos
This patch adds new platform data variable "caps", so platforms
could pass theirs capabilities into MMC core (for example, platforms
without interrupt on the CD line will most probably want to pass
MMC_CAP_NEEDS_POLL).
New platform get_cd() callback provided to optimize polling.
Signed-off-by: An
get_ro() callback must return values >= 0 for its logical state, and
negative errno values in case of error.
If particular host instance doesn't support RO/WP switch, it should
return -ENOSYS.
This patch changes some hosts in two ways:
1. Now functions should be smart to not return negative valu
Make sure CONFIG_TASK_SIZE does not overlap CONFIG_KERNEL_START
This could happen when overriding settings to get 1GB lowmem, and would lead
to userland mysteriousely hanging.
This setting is only used by PPC32.
Signed-off-by Rune Torgersen <[EMAIL PROTECTED]>
diff --git a/include/asm-powerpc/pr
Hi Kumar,
Here is updated series, with your comments addressed. Patches are
rebased on top of your current powerpc-next branch.
[PATCH 1/7] [POWERPC] sysdev: implement FSL GTM support
- added "depends on" to the Kconfig
- reverted to arch_initcall
- added Context: tip to the documentation
- reset
GTM stands for General-purpose Timers Module and able to generate
timer{1,2,3,4} interrupts. These timers are used by the drivers that
need time precise interrupts (like for USB transactions scheduling for
the Freescale USB Host controller as found in some QE and CPM chips),
or these timers could b
This patch adds a function to the qe_lib to setup QE USB clocks routing.
To setup clocks safely, cmxgcr register needs locking, so I just reused
ucc_lock since it was used only to protect cmxgcr.
The idea behind placing clocks routing functions into the qe_lib is that
later we'll hopefully switch
- split and export __par_io_config_pin() out of par_io_config_pin(), so we
could use the prefixed version with GPIO LIB API;
- rename struct port_regs to qe_pio_regs, and place it into qe.h;
- rename #define NUM_OF_PINS to QE_PIO_PINS, and place it into qe.h.
Signed-off-by: Anton Vorontsov <[EMA
This is needed to access QE GPIOs via Linux GPIO API.
Signed-off-by: Anton Vorontsov <[EMAIL PROTECTED]>
Acked-By: Timur Tabi <[EMAIL PROTECTED]>
---
Documentation/powerpc/booting-without-of.txt | 27 +
arch/powerpc/sysdev/qe_lib/Kconfig |9 ++
arch/powerpc/sysdev/qe_lib/Makef
This is patch adds board file, device tree, and defconfig for the new
board, made by Freescale Semiconductor Inc. and Logic Product Development.
Currently supported:
1. UEC{1,2,7,4};
2. I2C;
3. SPI;
4. NS16550 serial;
5. PCI and miniPCI;
6. Intel NOR StrataFlash X16 64Mbit PC28F640P30T85;
7. Graph
This patch adds few bindings for the new drivers to be submitted through
appropriate maintainers.
Signed-off-by: Anton Vorontsov <[EMAIL PROTECTED]>
---
Documentation/powerpc/booting-without-of.txt | 125 ++
1 files changed, 125 insertions(+), 0 deletions(-)
diff --git a
This is very trivial patch. We're transitioning to the cpm_muram_*
calls. That's it.
Less trivial changes:
- BD_SC_* defines were defined in the cpm.h and qe.h, so to avoid redefines
we remove BD_SC from the qe.h and use cpm.h along with cpm_muram_*
prototypes;
- qe_muram_dump was unused and t
On Fri, 23 May 2008 15:04:56 +0200
Stefan Roese <[EMAIL PROTECTED]> wrote:
> Since AMCC now reports that the 460GT *has* an FPU, we should enable it
> (again). This patch basically reverts my patch
> acb0142bf01c0ebe18f09e37814451ee6a873e27 ([POWERPC] 4xx: Fix 460GT support
> to not enable FPU), w
On May 23, 2008, at 10:59 AM, Rune Torgersen wrote:
Make sure CONFIG_TASK_SIZE does not overlap CONFIG_KERNEL_START
This could happen when overriding settings to get 1GB lowmem, and
would lead
to userland mysteriousely hanging.
This setting is only used by PPC32.
Signed-off-by Rune Torgers
On May 23, 2008, at 9:15 AM, Anton Vorontsov wrote:
This patch fixes following warning introduced by
commit 475ca391b490a683d66bf1a8a7a24913f139 (mpic: Deal with
bogus NIRQ
in Feature Reporting Register):
CC arch/powerpc/sysdev/mpic.o
arch/powerpc/sysdev/mpic.c: In function ‘mpi
On Thu, 2008-05-22 at 13:51 +1000, Paul Mackerras wrote:
> Luis Machado writes:
>
> > This is a patch that has been sitting idle for quite some time. I
> > decided to move it further because it is something useful. It was
> > originally written by Michel Darneille, based off of 2.6.16.
> >
> > Th
On Wed, 2008-05-21 at 23:46 -0700, Roland McGrath wrote:
> > I would think there would be a different REQUEST value to mean "set a
> > hardware breakpoint". Roland McGrath (cc'd) might be able to tell us
> > what other architectures do.
>
> Other architectures don't give a good model to follow.
Hi all,
This is second attempt to write the OpenFirmware bindings for the
MMC-over-SPI (and SPI bindings in general). First attempt[1] was discussed
in the linuxppc-dev list only, since I tried to do the bindings without
touching the drivers them self. That attempt got a cool welcome, so here
is a
...so we'll able to write bindings for the OpenFirmware without
messing with #ifdefs in the driver itself.
Signed-off-by: Anton Vorontsov <[EMAIL PROTECTED]>
---
drivers/mmc/host/mmc_spi.c |6 --
drivers/mmc/host/mmc_spi.h |7 +++
2 files changed, 11 insertions(+), 2 deletions(-)
This patch depends on the Grant Likely's SPI patches, so this is
for RFC only.
Also, later we'll able to remove OF_GPIO dependency.
Signed-off-by: Anton Vorontsov <[EMAIL PROTECTED]>
---
Documentation/powerpc/booting-without-of.txt | 24
drivers/mmc/host/Kconfig |7
Hi,
I am trying to use the mpc8313e internal usb phy with internal
oscillator frequency of 24 Mz. in host mode on a custom board.
Whenever I plugin any low/fast speed device the device gets detected but
then always get an error
"cannot read descriptor 64 error 71".Also I get address error aft
This patch fixes following warning introduced by
commit 475ca391b490a683d66bf1a8a7a24913f139 (mpic: Deal with bogus NIRQ
in Feature Reporting Register):
CC arch/powerpc/sysdev/mpic.o
arch/powerpc/sysdev/mpic.c: In function 'mpic_alloc':
arch/powerpc/sysdev/mpic.c:1146: warning: suggest
On Fri, May 23, 2008 at 02:32:22PM -0400, Suvidh Kankariya wrote:
> Hi,
> I am trying to use the mpc8313e internal usb phy with internal
> oscillator frequency of 24 Mz. in host mode on a custom board.
> Whenever I plugin any low/fast speed device the device gets detected but
> then always get
Thanks Anton,
With the kernel version 2.6.20 I am using Majority of this changes are
hard code values in mpc8313.c
I did already changed this value for my custom board file.
But I am getting the error irrespectively.
Is the relatonship description between USB DR clk and other as mentioned
in
Benjamin Herrenschmidt wrote:
On Fri, 2008-05-23 at 08:36 -0400, Benjamin Herrenschmidt wrote:
- mandate some kind of dma_sync_for_device/cpu on consistent memory.
Almost no driver do that currently tho. They only do that for non
consistent memory mapped with dma_map_*.
- mandat
+ - fsl,fullspeed-clock : specifies the full speed USB clock
source in
+"clk" or "brg" format.
+ - fsl,lowspeed-clock : specifies the low speed USB clock source
in
+"clk" or "brg" format.
What format is "" in?
+ - fsl,usb-mode : should be "host".
If that's t
On Fri, 2008-05-23 at 16:14 -0500, Scott Wood wrote:
> As Trent pointed out, if you change to eieio in the accessors, that'd
> require drivers to also use mmiowb() before spin_unlock(), which fewer
> drivers currently do.
No, this is a totally different issue. And we keep track of the need
for
On Sat, May 24, 2008 at 12:10:56AM +0200, Segher Boessenkool wrote:
>> + - fsl,fullspeed-clock : specifies the full speed USB clock
>> source in
>> +"clk" or "brg" format.
>> + - fsl,lowspeed-clock : specifies the low speed USB clock source
>> in
>> +"clk" or "brg" for
This patch adds few bindings for the new drivers to be submitted through
appropriate maintainers.
Signed-off-by: Anton Vorontsov <[EMAIL PROTECTED]>
---
Documentation/powerpc/booting-without-of.txt | 114 ++
1 files changed, 114 insertions(+), 0 deletions(-)
diff --git a
Hi Anton,
On Fri, 23 May 2008 22:28:42 +0400 Anton Vorontsov <[EMAIL PROTECTED]> wrote:
>
> +++ b/drivers/mmc/host/of_mmc_spi.c
> +static int of_mmc_spi_probe(struct spi_device *spi)
> + /*
> + * mmc_spi_probe will use drvdata, so we can't use it. Use node's
> + * data instead.
> +
On Friday 23 May 2008, Josh Boyer wrote:
> > Since AMCC now reports that the 460GT *has* an FPU, we should enable it
> > (again). This patch basically reverts my patch
> > acb0142bf01c0ebe18f09e37814451ee6a873e27 ([POWERPC] 4xx: Fix 460GT
> > support to not enable FPU), which disabled the FPU upon
Anton Vorontsov wrote:
3. QE Serial UCCs (tested to not work with ucc_uart driver, reason
unknown, yet);
How far did you get on debugging this?
--
Timur Tabi
Linux Kernel Developer @ Freescale
___
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
On May 23, 2008, at 8:41 AM, Anton Vorontsov wrote:
This patch fixes few cosmetic issues, also removes unused function,
makes some functions static and reduces #ifdef count.
Signed-off-by: Anton Vorontsov <[EMAIL PROTECTED]>
---
applied.
- k
___
L
Yup, I like this approach better. I had been thinking about putting
this all in the same file (drivers/mmc/host/mmc_spi.c) instead of
exporting the probe/remove symbols and by using clear comment blocks
to divide the sections, but I've got no issues with this approach.
This is good work. Some co
From: Grant Likely <[EMAIL PROTECTED]>
Without simpleImage% in the BOOT_TARGETS list, it is impossible to
build any of the simpleImages.
Signed-off-by: Grant Likely <[EMAIL PROTECTED]>
---
Paulus, this is a bug fix for .26. I'll send you a pull request early next
week with this in it if nobody
On Wed, May 21, 2008 at 7:16 PM, David Brownell <[EMAIL PROTECTED]> wrote:
> On Friday 16 May 2008, Grant Likely wrote:
>> In my mind; platform_data and the device tree are all about the same
>> thing: representation. In other words, how to describe the
>> configuration of the hardware independent
On Thu, May 22, 2008 at 8:26 PM, David Brownell <[EMAIL PROTECTED]> wrote:
> On Wednesday 21 May 2008, Grant Likely wrote:
>> > spi-controller {
>> >#address-cells = 2;
>> >#size-cells = 0;
>> >[EMAIL PROTECTED],f000 { reg = < 0 f000 >; } // CS 0, SPI address
>> > f000
>> >
On Thu, May 22, 2008 at 8:05 PM, David Brownell <[EMAIL PROTECTED]> wrote:
> On Wednesday 21 May 2008, Anton Vorontsov wrote:
>> > +++ b/drivers/spi/spi_of.c
>>
>> I think better placement for this is drivers/of, no?
>
> Yes please.
Okay, I wasn't sure. Will do.
g.
--
Grant Likely, B.Sc., P.En
On Wed, May 21, 2008 at 6:17 PM, David Brownell <[EMAIL PROTECTED]> wrote:
> On Friday 16 May 2008, Grant Likely wrote:
>>
>> This patch splits the allocation and registration portions of code out
>> of spi_new_device() and creates three new functions; spi_alloc_device(),
>> spi_register_device(),
On Sat, May 24, 2008 at 12:43 AM, Grant Likely
<[EMAIL PROTECTED]> wrote:
> On Wed, May 21, 2008 at 6:17 PM, David Brownell <[EMAIL PROTECTED]> wrote:
>> On Friday 16 May 2008, Grant Likely wrote:
>>>
>>> This patch splits the allocation and registration portions of code out
>>> of spi_new_device()
80 matches
Mail list logo
