On Fri, May 23, 2008 at 02:32:22PM -0400, Suvidh Kankariya wrote: > Hi, > I am trying to use the mpc8313e internal usb phy with internal > oscillator frequency of 24 Mz. in host mode on a custom board. > Whenever I plugin any low/fast speed device the device gets detected but > then always get an error > "cannot read descriptor 64 error 71".Also I get address error after that . > > Can somebody point me what this error can be related to ?Can it be a > problem with ehci drivers or some configuration. (I get a valid clock > bit set in the status register).
This reminds me: http://patchwork.ozlabs.org/linuxppc/patch?id=17782 Was getting exactly same symptoms. Try similar changes, should help. > Also can someone point me how I include support for mmc on spi. I am > using kernel 2.6.20 that comes along with mpc8313e bsp. > > Any pointers are highly appreciable. > > Thanks in advance > Regards > > Suvidh -- Anton Vorontsov email: [EMAIL PROTECTED] irc://irc.freenode.net/bd2 _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
