> Doesn't look like you are passing a kernel parameters line. The
> kernel probably is booting, but doesn't know where to output the
> console. Try adding "console=ttyPSC0,115200".
Hi Grant,
I've tried to add that with this commands
=> bootargs debug console=ttyPSC0,115200 root=/dev/ram
=> save
Hello,
in uboot i have setting the bootargs variable:
=> bootargs debug console=ttyPSC0,115200 root=/dev/ram
=> saveenv
If I'm not wrong, the right sequence of commands should be the following:
$ make ARCH=powerpc mpc5200_defconfig
$ make ARCH=powerpc menuconfig
.. [customizations]...
$ make A
Nice to hear that, next week I'll try and let you know.
Thank you again for your support,
Fabrizio
On Fri, May 9, 2008 at 5:20 PM, Grant Likely <[EMAIL PROTECTED]> wrote:
> On Fri, May 9, 2008 at 9:02 AM, Fabri <[EMAIL PROTECTED]> wrote:
>> Thanks for the patches, now some more rows are printed a
On Fri, May 9, 2008 at 9:02 AM, Fabri <[EMAIL PROTECTED]> wrote:
> Thanks for the patches, now some more rows are printed after RamDisk loading:
>
> Verifying Checksum ... OK
> Loading Ramdisk to 0fe68000, end 0ff49bf2 ... OK
> Memory <- <0x0 0x1000> (256MB)
> CPU clock-frequency <- 0xbcd3d
Thanks for the patches, now some more rows are printed after RamDisk loading:
Verifying Checksum ... OK
Loading Ramdisk to 0fe68000, end 0ff49bf2 ... OK
Memory <- <0x0 0x1000> (256MB)
CPU clock-frequency <- 0xbcd3d80 (198MHz)
CPU timebase-frequency <- 0x1f78a40 (33MHz)
CPU bus-frequency
Errage corrige: Excuse me, bad cut and paste :)
This is the right output of the first try
## Booting image at 0300 ...
Image Name: Linux-2.6.25.2
Created: 2008-05-09 12:46:22 UTC
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size:1518744 Bytes = 1.4 M
Hello!
I've seen you guys are playing with a Lite5200b board, so I've decided
to do another attempt with mine.
On Thu, May 8, 2008 at 5:32 PM, Grant Likely <[EMAIL PROTECTED]> wrote:
> For example, use "make ARCH=powerpc cuImage.lite5200b" to build an
> image for the lite5200b board. The build sc
See if this patch makes any difference for you:
diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite520
index 8505e97..70d9a8e 100644
--- a/arch/powerpc/boot/dts/lite5200b.dts
+++ b/arch/powerpc/boot/dts/lite5200b.dts
@@ -342,4 +342,8 @@
0x020
On Thu, May 8, 2008 at 9:10 AM, Fabio Tosetto <[EMAIL PROTECTED]> wrote:
> Ok, maybe it's better to start from the beginning.
> Now I'm using a Lite5200b board, just to avoid problems with my hardware,
> and I'm trying to have a bootable kernel.
>
> With kernel version 2.6.24.6 I do the following
Ok, maybe it's better to start from the beginning.
Now I'm using a Lite5200b board, just to avoid problems with my
hardware, and I'm trying to have a bootable kernel.
With kernel version 2.6.24.6 I do the following commands
$ make ARCH=powerpc lite5200_defconfig
$ make ARCH=powerpc CROSS_COMPI
On Wed, May 7, 2008 at 6:49 AM, Fabio Tosetto <[EMAIL PROTECTED]> wrote:
>
> I've tried to port my exesting configurations to the powerpc tree but some
> configurations files are missing.
First, create a new .dts file for your board in arch/powerpc/boot/dts.
(just copy the lite5200.dts file). Mo
I've tried to port my exesting configurations to the powerpc tree but
some configurations files are missing.
I need to set PSC3 - PSC4 in uart mode:
before in file *arch/ppc/platforms/lite5200.c* I added
struct mpc52xx_psc_func mpc52xx_psc_functions[] = {
{ .id = 3,
On Mon, May 5, 2008 at 12:12 PM, Fabio Tosetto <[EMAIL PROTECTED]> wrote:
> Hello, I have an embedded system with an on-board processor powerpc MPC5200B
> and Linux kernel 2.6.22,
> I must turn over to MMC SPI on the PSC6.
>
> First, I
> have enabled PSC6:
>
> in ../arch/ppc/platforms/lite5200
Hello, I have an embedded system with an on-board processor powerpc
MPC5200B
and Linux kernel 2.6.22,
I must turn over to MMC SPI on the PSC6.
First, I
have enabled PSC6:
in ../arch/ppc/platforms/lite5200.c added PSC6 in SPI mode
struct mpc52xx_psc_func mpc52xx_psc_functions[] = {
{ .id
14 matches
Mail list logo
