On Fri, May 9, 2008 at 9:02 AM, Fabri <[EMAIL PROTECTED]> wrote:
> Thanks for the patches, now some more rows are printed after RamDisk loading:
>
> Verifying Checksum ... OK
> Loading Ramdisk to 0fe68000, end 0ff49bf2 ... OK
> Memory <- <0x0 0x10000000> (256MB)
> CPU clock-frequency <- 0xbcd3d80 (198MHz)
> CPU timebase-frequency <- 0x1f78a40 (33MHz)
> CPU bus-frequency <- 0x7de2900 (132MHz)
>
> zImage starting: loaded at 0x00400000 (sp: 0x0ff4a958)
> Allocating 0x32d410 bytes for kernel ...
> gunzipping (0x00000000 <- 0x0040d000:0x00730fd4)...done 0x30d150 bytes
> Using loader supplied ramdisk at 0xfe68000-0xff49bf2
> initrd head: 0x1f8b0808
>
> Linux/PowerPC load:
^^^^^^^^^^^^^^^^^^
Doesn't look like you are passing a kernel parameters line. The
kernel probably is booting, but doesn't know where to output the
console. Try adding "console=ttyPSC0,115200".
Cheers,
g.
>
--
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
