changes for v4:
incorporated shawn review comment
Pramod Kumar (2):
dt-bindings: arm: nxp: Add device tree binding for ls1046a-frwy board
arm64: dts: nxp: add ls1046a-frwy board support
Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
arch/arm64/boot/dts/freescale/Makefile
Add "fsl,ls1046a-frwy" bindings for ls1046afrwy board based on ls1046a SoC
Signed-off-by: Vabhav Sharma
Signed-off-by: Pramod Kumar
Reviewed-by: Rob Herring
---
Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetre
ls1046afrwy board is based on nxp ls1046a SoC.
Board support's 4GB ddr memory, i2c, microSD card,
serial console,qspi nor flash,ifc nand flash,qsgmii network interface,
usb 3.0 and serdes interface to support two x1gen3 pcie interface.
Signed-off-by: Vabhav Sharma
Signed-off-by: Pramod
ls1046afrwy board is based on nxp ls1046a SoC.
Board support's 4GB ddr memory, i2c, microSD card,
serial console,qspi nor flash,ifc nand flash,qsgmii network interface,
usb 3.0 and serdes interface to support two x1gen3 pcie interface.
Signed-off-by: Vabhav Sharma
Signed-off-by: Pramod
Changes for v3:
- Remove undocumented propert i2c-mux-never-disable
- Sort nodes at i2c mux in unit-address
- Remove Unnecessary newline
Changes for v2:
- Modified comit message
- Add dts entry for qspi nor flash
Pramod Kumar (3):
dt-bindings: arm: nxp: Add device tree binding for ls1046a-frwy
Add "fsl,ls1046a-frwy" bindings for ls1046afrwy board based on ls1046a SoC
Signed-off-by: Vabhav Sharma
Signed-off-by: Pramod Kumar
Reviewed-by: Rob Herring
---
Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetre
add micron nor flash support for ls1046a frwy board.
Signed-off-by: Ashish Kumar
Signed-off-by: Pramod Kumar
---
.../boot/dts/freescale/fsl-ls1046a-frwy.dts| 18 +-
1 file changed, 17 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a
Add "fsl,ls1046a-frwy" bindings for ls1046afrwy board based on ls1046a SoC
Signed-off-by: Vabhav Sharma
Signed-off-by: Pramod Kumar
Reviewed-by: Rob Herring
---
Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetre
add micron nor flash support for ls1046a frwy board.
Signed-off-by: Ashish Kumar
Signed-off-by: Pramod Kumar
---
.../boot/dts/freescale/fsl-ls1046a-frwy.dts| 18 +-
1 file changed, 17 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a
ls1046afrwy board is based on nxp ls1046a SoC.
Board support's 4GB ddr memory, i2c, microSD card,
serial console,qspi nor flash,ifc nand flash,qsgmii network interface,
usb 3.0 and serdes interface to support two x1gen3 pcie interface.
Signed-off-by: Vabhav Sharma
Signed-off-by: Pramod
Changes for v3:
- Remove undocumented propert i2c-mux-never-disable
- Sort nodes at i2c mux in unit-address
- Remove Unnecessary newline
Changes for v2:
- Modified comit message
- Add dts entry for qspi nor flash
Pramod Kumar (3):
dt-bindings: arm: nxp: Add device tree binding for ls1046a-frwy
Add "fsl,ls1046a-frwy" bindings for ls1046afrwy board based on ls1046a SoC
Signed-off-by: Vabhav Sharma
Signed-off-by: Pramod Kumar
Reviewed-by: Rob Herring
---
Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetre
add micron nor flash support for ls1046a frwy board.
Signed-off-by: Ashish Kumar
Signed-off-by: Pramod Kumar
---
.../boot/dts/freescale/fsl-ls1046a-frwy.dts | 17 +
1 file changed, 17 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
b/arch
Changes for v2:
- Modified comit message
- Add dts entry for qspi nor flash
Changes for v1:
- Add dts support for ls1046a frwy board.
- Add "fsl,ls1046a-frwy" bindings for ls1046afrwy board based on ls1046a SoC
Pramod Kumar (3):
dt-bindings: arm: nxp: Add device tree binding for ls
ls1046afrwy board is based on nxp ls1046a SoC.
Board support's 4GB ddr memory, i2c, microSD card,
serial console,qspi nor flash,ifc nand flash,qsgmii network interface,
usb 3.0 and serdes interface to support two x1gen3 pcie interface.
Signed-off-by: Vabhav Sharma
Signed-off-by: Pramod
Add "fsl,ls1046a-frwy" bindings for ls1046afrwy board based on ls1046a SoC
Signed-off-by: Vabhav Sharma
Signed-off-by: Pramod Kumar
---
Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/f
ls1046afrwy board is based on nxp ls1046a SoC.
Signed-off-by: Vabhav Sharma
Signed-off-by: Pramod Kumar
---
arch/arm64/boot/dts/freescale/Makefile| 1 +
.../boot/dts/freescale/fsl-ls1046a-frwy.dts | 156 ++
2 files changed, 157 insertions(+)
create mode 100644 arch
Add dts support for frwy-ls1046a which is based on ls1046a soc
Pramod Kumar (2):
dt-bindings: arm: fsl: Add device tree binding for ls1046a-frwy board
add dts file to enable support for ls1046afrwy board.
.../devicetree/bindings/arm/fsl.yaml | 1 +
arch/arm64/boot/dts/freescale
> On Mon, Jan 21, 2019 at 11:30:02AM +0530, Pramod Kumar wrote:
> > > > On Mon, Jan 21, 2019 at 11:28 AM Pramod Kumar
> > > >
> > > > wrote:
> > > >
> > > > Need comes from a specific use case where one Accelerator
> >
Thanks Sudeep for reviewing. Please see my comment inline below.
On Mon, Jan 21, 2019 at 4:52 PM Sudeep Holla wrote:
>
> On Mon, Jan 21, 2019 at 11:28:27AM +0530, Pramod Kumar wrote:
> > On Fri, Jan 18, 2019 at 5:02 PM Sudeep Holla wrote:
> > > On Fri, Jan 18, 2019 at 11:
On Mon, Jan 21, 2019 at 11:30 AM Pramod Kumar wrote:
>
>
>
> On Mon, Jan 21, 2019 at 11:28 AM Pramod Kumar
> wrote:
>>
>> Hi Sudeep,
>>
>> Thanks for having a glance on the patch. Please see my reply in line.
>>
>> Regards,
>> Pramod
plugging-out core.
Signed-off-by: Pramod Kumar
Reviewed-by: Ray Jui
Reviewed-by: Scott Branden
---
arch/arm64/kernel/smp.c | 5 +
1 file changed, 5 insertions(+)
diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
index 1598d6f..360e52b 100644
--- a/arch/arm64/kernel/smp.c
+++ b
plugging-out core.
Signed-off-by: Pramod Kumar
Reviewed-by: Ray Jui
Reviewed-by: Scott Branden
---
arch/arm64/kernel/smp.c | 5 +
1 file changed, 5 insertions(+)
diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
index 1598d6f..360e52b 100644
--- a/arch/arm64/kernel/smp.c
+++ b
> -Original Message-
> From: Axel Lin [mailto:axel@ingics.com]
> Sent: 30 August 2016 19:24
> To: Kishon Vijay Abraham I
> Cc: Pramod Kumar; Andrew Lunn; Jon Mason; linux-kernel@vger.kernel.org;
> Axel Lin
> Subject: [RESEND AGAIN][PATCH 2/2] phy: bcm-ns2-pci
> -Original Message-
> From: Axel Lin [mailto:axel@ingics.com]
> Sent: 30 August 2016 19:24
> To: Kishon Vijay Abraham I
> Cc: Pramod Kumar; Andrew Lunn; Jon Mason; linux-kernel@vger.kernel.org;
> Axel Lin
> Subject: [RESEND AGAIN][PATCH 1/2] phy: bcm-ns2-pc
ux_init api.
Signed-off-by: Pramod Kumar
Reviewed-by: Andrew Lunn
Reviewed-by: Florian Fainelli
---
drivers/net/phy/mdio-mux-gpio.c| 2 +-
drivers/net/phy/mdio-mux-mmioreg.c | 2 +-
drivers/net/phy/mdio-mux.c | 28 ++--
include/linux/mdio-mux.h
C-45 or C-22 mdio transaction.
Signed-off-by: Pramod Kumar
Reviewed-by: Andrew Lunn
Reviewed-by: Florian Fainelli
---
drivers/net/phy/Kconfig | 11 ++
drivers/net/phy/Makefile | 1 +
drivers/net/phy/mdio-mux-bcm-iproc.c | 248 +++
3
Add PCI Phy support for Broadcom Northstar2 SoCs. This driver uses the
interface from the iproc mdio mux driver to enable the devices
respective phys.
Reviewed-by: Andrew Lunn
Signed-off-by: Jon Mason
Signed-off-by: Pramod Kumar
---
drivers/phy/Kconfig| 8 +++
drivers/phy
ADDR_C45 into the address when issues
any C45 MDIO read/write transaction.
Pramod Kumar (7):
mdio: mux: Enhanced MDIO mux framework for integrated multiplexers
binding: Make "mdio-parent-bus" property from mandatory to optional
binding: mdio-mux: Add DT binding doc for Broadcom MDIO
Add DT binding doc for Broadcom MDIO bus multiplexer driver.
Reviewed-by: Andrew Lunn
Signed-off-by: Pramod Kumar
Reviewed-by: Florian Fainelli
Acked-by: Rob Herring
---
.../bindings/net/brcm,mdio-mux-iproc.txt | 59 ++
1 file changed, 59 insertions(+)
create
Add integrated MDIO multiplexer driver node which contains
two mux PCIe bus and one ethernet bus along with phys
lying on these bus.
Signed-off-by: Pramod Kumar
Acked-by: Rob Herring
---
arch/arm64/boot/dts/broadcom/ns2-svk.dts | 16 +
arch/arm64/boot/dts/broadcom/ns2.dtsi| 39
Binding doc for NS2 PCIe PHYs.
Signed-off-by: Pramod Kumar
Signed-off-by: Jon Mason
Acked-by: Rob Herring
---
.../bindings/phy/brcm,mdio-mux-bus-pci.txt | 27 ++
1 file changed, 27 insertions(+)
create mode 100644
Documentation/devicetree/bindings/phy/brcm,mdio
Change "mdio-parent-bus" from mandatory section to optional
as it won't be required by integrated MDIO multiplexer
which has bus selection and mdio transaction generation logic,
integrated inside.
Signed-off-by: Pramod Kumar
Reviewed-by: Andrew Lunn
Acked-by: Rob Herring
---
Hi Florian,
> -Original Message-
> From: Florian Fainelli [mailto:f.faine...@gmail.com]
> Sent: 07 June 2016 00:08
> To: Pramod Kumar; Rob Herring; Pawel Moll; Mark Rutland; Ian Campbell;
> Kumar Gala; Catalin Marinas; Will Deacon; Kishon Vijay Abraham I; David S.
> Mi
Hi Florian,
> -Original Message-
> From: Florian Fainelli [mailto:f.faine...@gmail.com]
> Sent: 07 June 2016 00:12
> To: Pramod Kumar; Rob Herring; Pawel Moll; Mark Rutland; Ian Campbell;
> Kumar Gala; Catalin Marinas; Will Deacon; Kishon Vijay Abraham I; David S.
> Mi
Hi Florian,
> -Original Message-
> From: Florian Fainelli [mailto:f.faine...@gmail.com]
> Sent: 07 June 2016 00:06
> To: Pramod Kumar; Rob Herring; Pawel Moll; Mark Rutland; Ian Campbell;
> Kumar Gala; Catalin Marinas; Will Deacon; Kishon Vijay Abraham I; David S.
> Mi
Add integrated MDIO multiplexer driver node which contains
two mux PCIe bus and one ethernet bus along with phys
lying on these bus.
Signed-off-by: Pramod Kumar
---
arch/arm64/boot/dts/broadcom/ns2-svk.dts | 12
arch/arm64/boot/dts/broadcom/ns2.dtsi| 31
C-45 or C-22 mdio transaction.
Signed-off-by: Pramod Kumar
---
drivers/net/phy/Kconfig | 11 ++
drivers/net/phy/Makefile | 1 +
drivers/net/phy/mdio-mux-bcm-iproc.c | 248 +++
3 files changed, 260 insertions(+)
create mode 100644
Binding doc for NS2 PCIe PHYs.
Acked-by: Rob Herring
Signed-off-by: Jon Mason
Signed-off-by: Pramod Kumar
---
.../bindings/phy/brcm,mdio-mux-bus-pci.txt | 27 ++
1 file changed, 27 insertions(+)
create mode 100644
Documentation/devicetree/bindings/phy/brcm,mdio
Add DT binding doc for Broadcom MDIO bus multiplexer driver.
Reviewed-by: Andrew Lunn
Signed-off-by: Pramod Kumar
---
.../bindings/net/brcm,mdio-mux-iproc.txt | 59 ++
1 file changed, 59 insertions(+)
create mode 100644
Documentation/devicetree/bindings/net/brcm
Add PCI Phy support for Broadcom Northstar2 SoCs. This driver uses the
interface from the iproc mdio mux driver to enable the devices
respective phys.
Reviewed-by: Andrew Lunn
Signed-off-by: Jon Mason
Signed-off-by: Pramod Kumar
---
drivers/phy/Kconfig| 8 +++
drivers/phy
ux_init api.
Signed-off-by: Pramod Kumar
---
drivers/net/phy/mdio-mux-gpio.c| 2 +-
drivers/net/phy/mdio-mux-mmioreg.c | 2 +-
drivers/net/phy/mdio-mux.c | 28 ++--
include/linux/mdio-mux.h | 4 +++-
4 files changed, 23 insertions(+), 13 deleti
gister()
in place of of_mdiobus_regsiter().
-removed usage of IS_ERR_OR_NULL to IS_ERR in PCIe PHY driver.
Changes from v1:
- stop using "brcm,is_c45" from bus node as suggested by Andrew. MDIO
PHY driver will logically OR MII_ADDR_C45 into the address when issues
any C45 MDIO read/write transaction.
Change "mdio-parent-bus" from mandatory section to optional
as it won't be required by integrated MDIO multiplexer
which has bus selection and mdio transaction generation logic,
integrated inside.
Signed-off-by: Pramod Kumar
---
Documentation/devicetree/bindings/net/mdio-mux.txt
Add DT binding doc for Broadcom MDIO bus mutiplexer driver.
Signed-off-by: Pramod Kumar
---
.../bindings/net/brcm,mdio-mux-iproc.txt | 59 ++
1 file changed, 59 insertions(+)
create mode 100644
Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt
diff
Binding doc for NS2 PCIe PHYs.
Acked-by: Rob Herring
Signed-off-by: Jon Mason
Signed-off-by: Pramod Kumar
---
.../bindings/phy/brcm,mdio-mux-bus-pci.txt | 27 ++
1 file changed, 27 insertions(+)
create mode 100644
Documentation/devicetree/bindings/phy/brcm,mdio
Add PCI Phy support for Broadcom Northstar2 SoCs. This driver uses the
interface from the iproc mdio mux driver to enable the devices
respective phys.
Signed-off-by: Jon Mason
Signed-off-by: Pramod Kumar
---
drivers/phy/Kconfig| 8 +++
drivers/phy/Makefile | 2
-45 or C-22 mdio transaction.
Signed-off-by: Pramod Kumar
---
drivers/net/phy/Kconfig | 11 ++
drivers/net/phy/Makefile | 1 +
drivers/net/phy/mdio-mux-bcm-iproc.c | 246 +++
3 files changed, 258 insertions(+)
create mode 100644 drivers
Change "mdio-parent-bus" from mandatory section to optional
as it won't be required by integrated MDIO multiplexer
which has bus selection and mdio transaction generation logic,
integrated inside.
Signed-off-by: Pramod Kumar
---
Documentation/devicetree/bindings/net/mdio-mux.txt
er.
Changes from v1:
- stop using "brcm,is_c45" from bus node as suggested by Andrew. MDIO
PHY driver will logically OR MII_ADDR_C45 into the address when issues
any C45 MDIO read/write transaction.
Pramod Kumar (7):
mdio:mux: Enhanced MDIO mux framework for integrated multiplexers
Add integrated MDIO multiplexer driver node which contains
two mux PCIe bus and one ethernet bus along with phys
lying on these bus.
Signed-off-by: Pramod Kumar
---
arch/arm64/boot/dts/broadcom/ns2-svk.dts | 12
arch/arm64/boot/dts/broadcom/ns2.dtsi| 31
ux_init api.
Signed-off-by: Pramod Kumar
---
drivers/net/phy/mdio-mux-gpio.c| 2 +-
drivers/net/phy/mdio-mux-mmioreg.c | 2 +-
drivers/net/phy/mdio-mux.c | 28 ++--
include/linux/mdio-mux.h | 4 +++-
4 files changed, 23 insertions(+), 13 deleti
Add integrated MDIO multiplexer driver node which contains
two mux PCIe bus and one ethernet bus along with phys
lying on these bus.
Signed-off-by: Pramod Kumar
---
arch/arm64/boot/dts/broadcom/ns2-svk.dts | 12
arch/arm64/boot/dts/broadcom/ns2.dtsi| 31
Add DT binding doc for Broadcom MDIO bus mutiplexer driver.
Signed-off-by: Pramod Kumar
---
.../bindings/net/brcm,mdio-mux-iproc.txt | 59 ++
1 file changed, 59 insertions(+)
create mode 100644
Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt
diff
ux_init api.
Signed-off-by: Pramod Kumar
---
drivers/net/phy/mdio-mux-gpio.c| 2 +-
drivers/net/phy/mdio-mux-mmioreg.c | 2 +-
drivers/net/phy/mdio-mux.c | 28 ++--
include/linux/mdio-mux.h | 4 +++-
4 files changed, 23 insertions(+), 13 deleti
Binding doc for NS2 PCIe PHYs.
Acked-by: Rob Herring
Signed-off-by: Jon Mason
Signed-off-by: Pramod Kumar
---
.../bindings/phy/brcm,mdio-mux-bus-pci.txt | 27 ++
1 file changed, 27 insertions(+)
create mode 100644
Documentation/devicetree/bindings/phy/brcm,mdio
-45 or C-22 mdio transaction.
Signed-off-by: Pramod Kumar
---
drivers/net/phy/Kconfig | 11 ++
drivers/net/phy/Makefile | 1 +
drivers/net/phy/mdio-mux-bcm-iproc.c | 246 +++
3 files changed, 258 insertions(+)
create mode 100644 drivers
Add PCI Phy support for Broadcom Northstar2 SoCs. This driver uses the
interface from the iproc mdio mux driver to enable the devices
respective phys.
Signed-off-by: Jon Mason
Signed-off-by: Pramod Kumar
---
drivers/phy/Kconfig| 8 +++
drivers/phy/Makefile | 1
Change "mdio-parent-bus" from mandatory section to optional
as it won't be required by integrated MDIO multiplexer
which has bus selection and mdio transaction generation logic,
integrated inside.
Signed-off-by: Pramod Kumar
---
Documentation/devicetree/bindings/net/mdio-mux.txt
,is_c45" from bus node as suggested by Andrew. MDIO
PHY driver will logically OR MII_ADDR_C45 into the address when issues
any C45 MDIO read/write transaction.
Pramod Kumar (7):
mdio:mux: Enhanced MDIO mux framework for integrated multiplexers
binding: Make "mdio-parent-bus" prope
Hi Rob,
> -Original Message-
> From: Rob Herring [mailto:r...@kernel.org]
> Sent: 03 June 2016 07:13
> To: Pramod Kumar
> Cc: Pawel Moll; Mark Rutland; Ian Campbell; Kumar Gala; Catalin Marinas;
Will
> Deacon; Kishon Vijay Abraham I; David S. Miller;
devicet...@vger.k
talin.mari...@arm.com; will.dea...@arm.com; kis...@ti.com;
> devicet...@vger.kernel.org; linux-arm-ker...@lists.infradead.org;
bcm-kernel-
> feedback-l...@broadcom.com; linux-kernel@vger.kernel.org;
> net...@vger.kernel.org
> Subject: Re: [PATCH v2 5/7] net:mdio-mux: Add MDIO mux drive
Hi Andrew,
> -Original Message-
> From: Andrew Lunn [mailto:and...@lunn.ch]
> Sent: 01 June 2016 18:32
> To: Pramod Kumar
> Cc: Rob Herring; Pawel Moll; Mark Rutland; Ian Campbell; Kumar Gala;
Catalin
> Marinas; Will Deacon; Kishon Vijay Abraham I; David S.
Hi Andrew,
> -Original Message-
> From: Andrew Lunn [mailto:and...@lunn.ch]
> Sent: 01 June 2016 18:42
> To: Pramod Kumar
> Cc: Rob Herring; Pawel Moll; Mark Rutland; Ian Campbell; Kumar Gala;
Catalin
> Marinas; Will Deacon; Kishon Vijay Abraham I; David S.
Binding doc for NS2 PCIe PHYs.
Signed-off-by: Jon Mason
Signed-off-by: Pramod Kumar
---
.../bindings/phy/brcm,mdio-mux-bus-pci.txt | 27 ++
1 file changed, 27 insertions(+)
create mode 100644
Documentation/devicetree/bindings/phy/brcm,mdio-mux-bus-pci.txt
diff
Add PCI Phy support for Broadcom Northstar2 SoCs. This driver uses the
interface from the iproc mdio mux driver to enable the devices
respective phys.
Signed-off-by: Jon Mason
Signed-off-by: Pramod Kumar
---
drivers/phy/Kconfig| 8 +++
drivers/phy/Makefile | 1
not scan for phys.
2. Passed down parent bus to mdio mux framework via mdio-mux-init api.
Signed-off-by: Pramod Kumar
---
drivers/net/phy/mdio-mux-gpio.c| 2 +-
drivers/net/phy/mdio-mux-mmioreg.c | 2 +-
drivers/net/phy/mdio-mux.c | 28 ++--
drivers/o
p using "brcm,is_c45" from bus node as suggested by Andrew. MDIO
PHY driver will logically OR MII_ADDR_C45 into the address when issues
any C45 MDIO read/write transaction.
Pramod Kumar (7):
mdio:mux: Enhanced MDIO mux framework for integrated multiplexers
DT: phy.txt: Add mdio-integrate
This property is used by integrated MDIO multiplexer
which has bus selection and mdio transaction generation logic,
integrated inside.
Signed-off-by: Pramod Kumar
---
Documentation/devicetree/bindings/net/mdio-mux.txt | 9 -
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a
-45 or C-22 mdio transaction.
Signed-off-by: Pramod Kumar
---
drivers/net/phy/Kconfig | 11 ++
drivers/net/phy/Makefile | 1 +
drivers/net/phy/mdio-mux-bcm-iproc.c | 243 +++
3 files changed, 255 insertions(+)
create mode 100644 drivers
Add integrated MDIO multiplexer driver node which contains
two mux PCIe bus and one ethernet bus along with phys
lying on these bus.
Signed-off-by: Pramod Kumar
---
arch/arm64/boot/dts/broadcom/ns2-svk.dts | 12
arch/arm64/boot/dts/broadcom/ns2.dtsi| 32
Add DT binding doc for Broadcom MDIO bus mutiplexer driver.
Signed-off-by: Pramod Kumar
---
.../bindings/net/brcm,mdio-mux-iproc.txt | 60 ++
1 file changed, 60 insertions(+)
create mode 100644
Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt
diff
Hi Andrew,
> -Original Message-
> From: Andrew Lunn [mailto:and...@lunn.ch]
> Sent: 30 May 2016 20:54
> To: Pramod Kumar
> Cc: Rob Herring; Pawel Moll; Mark Rutland; Ian Campbell; Kumar Gala;
Catalin
> Marinas; Will Deacon; Kishon Vijay Abraham I; David S.
Hi Andrew,
Thanks for reviewing. Please see my comment inline.
> -Original Message-
> From: Andrew Lunn [mailto:and...@lunn.ch]
> Sent: 30 May 2016 19:05
> To: Pramod Kumar
> Cc: Rob Herring; Pawel Moll; Mark Rutland; Ian Campbell; Kumar Gala;
Catalin
> Marinas; Will De
Binding doc for NS2 PCIe PHYs.
Signed-off-by: Jon Mason
Signed-off-by: Pramod Kumar
---
.../bindings/phy/brcm,mdio-mux-bus-pci.txt | 27 ++
1 file changed, 27 insertions(+)
create mode 100644
Documentation/devicetree/bindings/phy/brcm,mdio-mux-bus-pci.txt
diff
Add PCI Phy support for Broadcom Northstar2 SoCs. This driver uses the
interface from the iproc mdio mux driver to enable the devices
respective phys.
Signed-off-by: Jon Mason
Signed-off-by: Pramod Kumar
---
drivers/phy/Kconfig| 8 +++
drivers/phy/Makefile | 1
Add integrated MDIO multiplexer driver node which contains
two mux PCIe bus and one ethernet bus along with phys
lying on these bus.
Signed-off-by: Pramod Kumar
---
arch/arm64/boot/dts/broadcom/ns2-svk.dts | 12
arch/arm64/boot/dts/broadcom/ns2.dtsi| 32
not scan for phys.
2. Passed down parent bus to mdio mux framework via mdio-mux-init api.
Signed-off-by: Pramod Kumar
---
drivers/net/phy/mdio-mux-gpio.c| 2 +-
drivers/net/phy/mdio-mux-mmioreg.c | 2 +-
drivers/net/phy/mdio-mux.c | 28 ++--
drivers/o
with above
framework changes. It includes one external bus node having Ethernet PHY
attached and two internal bus node holding PCIe PHYs.
This patch series is based on v4.6.0-rc1 and is available from github-
repo: https://github.com/Broadcom/arm64-linux.git
branch:mdio-mux-v1
Pramod Kumar (7):
mdi
-45 or C-22 mdio transaction.
Signed-off-by: Pramod Kumar
---
drivers/net/phy/Kconfig | 11 ++
drivers/net/phy/Makefile | 1 +
drivers/net/phy/mdio-mux-bcm-iproc.c | 263 +++
3 files changed, 275 insertions(+)
create mode 100644 drivers
Add DT binding doc for Broadcom MDIO bus mutiplexer driver.
Signed-off-by: Pramod Kumar
---
.../bindings/net/brcm,mdio-mux-iproc.txt | 64 ++
1 file changed, 64 insertions(+)
create mode 100644
Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt
diff
This property is used by integrated MDIO multiplexer
which has bus selection and mdio transaction generation logic,
integrated inside.
Signed-off-by: Pramod Kumar
---
Documentation/devicetree/bindings/net/mdio-mux.txt | 9 -
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a
Shared MDIO framework in next patch
revision to get a feel of its need.
Regards,
Pramod
> -Original Message-
> From: Andrew Lunn [mailto:and...@lunn.ch]
> Sent: 26 April 2016 02:27
> To: Pramod Kumar
> Cc: Rob Herring; Catalin Marinas; Will Deacon; Masahiro
Hi Rob,
Thanks for review and providing your valuable comments.
> -Original Message-
> From: Rob Herring [mailto:r...@kernel.org]
> Sent: 23 April 2016 01:44
> To: Pramod Kumar
> Cc: Catalin Marinas; Will Deacon; Masahiro Yamada; Chen-Yu Tsai; BCM
Kernel
> Feedback
Hi Rob,
Thanks for reviewing and providing your valuable comments.
> -Original Message-
> From: Rob Herring [mailto:r...@kernel.org]
> Sent: 23 April 2016 01:41
> To: Pramod Kumar
> Cc: Catalin Marinas; Will Deacon; Masahiro Yamada; Chen-Yu Tsai; Mark
>
infradead.org; linux-
> ker...@vger.kernel.org; net...@vger.kernel.org; anup.pa...@broadcom.com
> Subject: Re: [PATCH 1/6] bus: Add shared MDIO bus framework
>
> From: Pramod Kumar
> Date: Thu, 21 Apr 2016 14:48:38 +0530
>
> > +struct shared_mdio_maste
: Pramod Kumar
Signed-off-by: Anup Patel
Reviewed-by: Ray Jui
Reviewed-by: Scott Branden
Reviewed-by: Vikram Prakash
---
drivers/bus/Kconfig | 11 +++
drivers/bus/Makefile| 1 +
drivers/bus/shared_mdio.c | 179
include/linux
Add Ethernet master driver which registers the ethernet phy
to standard legacy mdio framework.
Signed-off-by: Pramod Kumar
Reviewed-by: Ray Jui
Reviewed-by: Scott Branden
---
drivers/net/phy/Kconfig | 11 +++
drivers/net/phy/Makefile| 1 +
drivers/net/phy
Adding binding doc for ethernet master present in shared
MDIO controller.
Signed-off-by: Pramod Kumar
Reviewed-by: Ray Jui
Reviewed-by: Scott Branden
---
.../bindings/net/brcm,iproc-mdio-shared.txt| 32 ++
1 file changed, 32 insertions(+)
create mode 100644
Add NS2 Shared MDIO Controller DT node having eth phy as child.
This node represents the NS2 AMAC eth phy.
Signed-off-by: Pramod Kumar
Reviewed-by: Ray Jui
Reviewed-by: Scott Branden
---
arch/arm64/boot/dts/broadcom/ns2-svk.dts | 15 +++
arch/arm64/boot/dts/broadcom/ns2.dtsi
Add platform driver to populate shared MDIO masters on iProc SoC.
Signed-off-by: Pramod Kumar
Reviewed-by: Anup Patel
Reviewed-by: Ray Jui
Reviewed-by: Scott Branden
Reviewed-by: Vikram Prakash
---
drivers/bus/Kconfig | 11 ++
drivers/bus/Makefile| 1 +
drivers
Add DT binding doc for iProc Shared MDIO Controller which
populate all masters to Shared MDIO framework.
Signed-off-by: Pramod Kumar
Reviewed-by: Ray Jui
Reviewed-by: Scott Branden
---
.../bindings/bus/brcm,iproc-shared-mdio.txt| 76 ++
1 file changed, 76
ich will
register phys for their subsystem.
Patch series is developed based on Linux v4.6-rc1 and available at:
repo: https://github.com/Broadcom/arm64-linux.git
branch: shared_mdio_v0
Pramod Kumar (6):
bus: Add shared MDIO bus framework
Documentation: DT binding doc for iProc Shared MDIO
gt; Cc: linux-n...@vger.kernel.org; linux-kernel@vger.kernel.org; Pramod Kumar;
> Ray Jui; Scott Branden
> Subject: linux-next: build failure after merge of the pinctrl tree
>
> Hi Linus,
>
> After merging the pinctrl tree, today's linux-next build (arm
> multi_v7_defconfig) f
failed. After fixing this I see compilation successful. I don't think we see
any more issue after this fix.
Please let me know in case I should try any more compilation.
Regards,
Pramod
> -Original Message-
> From: Stephen Rothwell [mailto:s...@canb.auug.org.au]
> Sent: 18
> Cc: linux-n...@vger.kernel.org; linux-kernel@vger.kernel.org; Pramod Kumar;
> Ray Jui; Scott Branden
> Subject: linux-next: build failure after merge of the pinctrl tree
>
> Hi Linus,
>
> After merging the pinctrl tree, today's linux-next build (arm
> multi
Hi Rob,
> -Original Message-
> From: Rob Herring [mailto:r...@kernel.org]
> Sent: 20 November 2015 21:05
> To: Pramod Kumar
> Cc: Pawel Moll; Mark Rutland; Ian Campbell; Kumar Gala; Ray Jui; Scott
> Branden;
> Russell King; Linus Walleij; linux-g...@vger.kernel.org
This compatible string should be used for all new iproc based future
SoCs having the same GPIO controller hardware.
Signed-off-by: Pramod Kumar
Reviewed-by: Ray Jui
Reviewed-by: Scott Branden
---
drivers/pinctrl/bcm/pinctrl-cygnus-gpio.c | 1 +
1 file changed, 1 insertion(+)
diff --git a
Add ngpios property in cygnus ASIU, CCM and CRMU gpio controller's node
Signed-off-by: Pramod Kumar
Reviewed-by: Ray Jui
Reviewed-by: Scott Branden
---
arch/arm/boot/dts/bcm-cygnus.dtsi | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi
b/arch/arm
Change functions, macros and variables name from cygnus to IP block,
iproc, so that it could be used in all iproc based future SoCs having
same GPIO controller block.
Signed-off-by: Pramod Kumar
Reviewed-by: Ray Jui
Reviewed-by: Scott Branden
---
drivers/pinctrl/bcm/pinctrl-cygnus-gpio.c
1 - 100 of 122 matches
Mail list logo
