On Mon, 11 Jun 2001, Shaul Karl wrote:
> I am not sure I understand the differences between a hub and a switch. Am I
> right in saying that these 2 devices operate at 2 distinct layers?
Ethernet (10base5, or 10base2) is shared media (everyone gets everyone's
traffic). A hub (10baseT) does the
e switch and they are the reason
> > > your sessions broke up.
> > >
> > > -Original Message-
> > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
> > > Behalf Of Aviram Jenik
> > > Sent: Thursday, June 07, 2001 8:48 AM
> > > T
On Fri, 8 Jun 2001, Henry Fischer wrote:
> > There's nothing of that sort - no serial connection, not any other
> > connection. The documentation mentions nothing about configuring the switch
> > by software or by any other means.
> > - Aviram
>
> I find it very unlikely that there's no way to c
> >
> > -Original Message-
> > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
> > Behalf Of Aviram Jenik
> > Sent: Thursday, June 07, 2001 8:48 AM
> > To: Shaul Karl
> > Cc: linux ILUG
> > Subject: Re: ADSL problems with 10/100 NICs
>
the switch and they are the reason
> your sessions broke up.
>
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
> Behalf Of Aviram Jenik
> Sent: Thursday, June 07, 2001 8:48 AM
> To: Shaul Karl
> Cc: linux ILUG
> Subject: Re: ADSL problems
I appreciate the help I received, but I'm very certain this switch is not
configurable - it has no serial port, the CD that came with it doesn't have
any executables (only manual pages), nothing in the docs mentions
configuration of some kind, and there's no buttons or switches (except the
uplink
addy.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
Behalf Of Henry Fischer
Sent: Friday, June 08, 2001 11:15 AM
To: Linux-IL Mailing list
Subject: Re: ADSL problems with 10/100 NICs
> There's nothing of that sort - no serial connection, not any other
>
witch is non-configurable, either replace it or start
working on the card which is cheaper to replace in the worst case.
-Original Message-
From: Shaul Karl [mailto:[EMAIL PROTECTED]]
Sent: Friday, June 08, 2001 2:48 AM
To: [EMAIL PROTECTED]
Cc: Aviram Jenik; linux ILUG
Subject: Re: ADSL
> There's nothing of that sort - no serial connection, not any other
> connection. The documentation mentions nothing about configuring the switch
> by software or by any other means.
> - Aviram
I find it very unlikely that there's no way to configure your switch. I think
all modern hubs/switche
> Check the switch in the back (or front...i dont know what your switch
looks
> like)
> it should have at least a serial connection, its the direct cable
> connection.
There's nothing of that sort - no serial connection, not any other
connection. The documentation mentions nothing about configu
> Unlike a 10/100 hub a switch will not automatically handle differences in
> communication speeds.
Isn't a switch considered more sophist acted device then a hub?
Can you give pointers for what you wrote?
Can you specify manufactures models in case you are considering equipment you
are fami
used switch?
did someone configure it before you?
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
Behalf Of Aviram Jenik
Sent: Thursday, June 07, 2001 8:22 PM
To: [EMAIL PROTECTED]; Eran Levy
Subject: Re: ADSL problems with 10/100 NICs
> Hi,
> I dont know exact
On Wed, 6 Jun 2001, Aviram Jenik wrote:
> I'm having a strange problem with my ADSL connection. I'm not sure the
> problem is Linux related (probably isn't), but hopefully the solution is
> Linux related :-)
>
> I recently replaced my home network's hub with a dual-speed switch (3Com's
> officec
> Hi,
> I dont know exactly but from my experience the problem should be a
> misconfiguration in your switch.
Yes, that sounds like it.
There doesn't seem to be a way to configure the switch, though.
- Aviram
=
To unsubscribe, se
Hi,
I dont know exactly but from my experience the problem should be a
misconfiguration in your switch.
At 18:06 07/06/01 +0200, you wrote:
>Hi,
>
> > At home I had a similar
> > problem which turned out to be wrong MTU. So I suggest you check the
> > ADSL Howto and verify that you have lowered M
Hi,
> At home I had a similar
> problem which turned out to be wrong MTU. So I suggest you check the
> ADSL Howto and verify that you have lowered MTU on all workstations or
> implemented the iptables fix if you have 2.4 kernel.
>
Seems strange to me that the problem would be MTU related, since t
f fredy
> Sent: Thursday, June 07, 2001 1:02 PM
> To: Aviram Jenik; Shaul Karl
> Cc: linux ILUG
> Subject: RE: ADSL problems with 10/100 NICs
>
>
> Unlike a 10/100 hub a switch will not automatically handle
> differences in
> communication speeds.
> I never used 3com
]On
Behalf Of Aviram Jenik
Sent: Thursday, June 07, 2001 8:48 AM
To: Shaul Karl
Cc: linux ILUG
Subject: Re: ADSL problems with 10/100 NICs
> > My guess is that those machines are sending packets in 100mbps whereas
the
> > Linux machine uses a 10mbps card and loses packets, which re
> > My guess is that those machines are sending packets in 100mbps whereas
the
> > Linux machine uses a 10mbps card and loses packets, which results in a
> > broken connection.
>
> I was under the impression that a good dual-speed switch should handle
those speed differences by itself, transparen
> I'm having a strange problem with my ADSL connection. I'm not sure the
> problem is Linux related (probably isn't), but hopefully the solution is
> Linux related :-)
>
> I recently replaced my home network's hub with a dual-speed switch (3Com's
> officeconnect) that supports both 10 and 100 con
I'm having a strange problem with my ADSL connection. I'm not sure the
problem is Linux related (probably isn't), but hopefully the solution is
Linux related :-)
I recently replaced my home network's hub with a dual-speed switch (3Com's
officeconnect) that supports both 10 and 100 connections.
My
21 matches
Mail list logo
