On 08/08/2024 20:40, Danila Tikhonov wrote:
> The PN553 is another NFC chip from NXP, document the compatible in the
> bindings.
>
> Signed-off-by: Danila Tikhonov
> ---
> Documentation/devicetree/bindings/net/nfc/nxp,nci.yaml | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/Documentati
Platform
> by using the QCM6490 bindings as fallback.
>
> Signed-off-by: Danila Tikhonov
> ---
> .../devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml| 5 +
> 1 file changed, 5 insertions(+)
>
Reviewed-by: Krzysztof Kozlowski
Best regards,
Krzysztof
On 13/08/2024 21:33, Rob Herring wrote:
> On Fri, Aug 09, 2024 at 07:39:53AM +0200, Krzysztof Kozlowski wrote:
>> On 08/08/2024 20:40, Danila Tikhonov wrote:
>>> The PN553 is another NFC chip from NXP, document the compatible in the
>>> bindings.
>>>
t.kernel.org/krzk/linux-mem-ctrl/c/c1f2c81631df7654c249a457b7a54bbc36042248
Best regards,
--
Krzysztof Kozlowski
gt; its initialization earlier.
>
> [...]
Applied, thanks!
[1/1] pinctrl: samsung: Annotate struct exynos_muxed_weint_data with
__counted_by
https://git.kernel.org/pinctrl/samsung/c/4e1e21117e7e1275477ba80e634c769a511249bd
Best regards,
--
Krzysztof Kozlowski
On 10/10/2023 19:27, Duje Mihanović wrote:
> Add the "marvell,pxa1908-padconf" compatible to allow migrating to a
> separate pinctrl driver later.
>
> Signed-off-by: Duje Mihanović
> ---
> Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml | 4
> 1 file changed, 4 insertions(+)
>
565a3ff760fa7
Best regards,
--
Krzysztof Kozlowski
On 12/10/2023 22:02, Krzysztof Kozlowski wrote:
>
> On Sat, 07 Oct 2023 22:36:33 -0500, Sam Protsenko wrote:
>> Reserve a 2 MiB memory region to record kmsg dumps, console, ftrace and
>> userspace messages. The implemented memory split allows capturing and
>> reading co
On 21/10/2023 22:34, Luka Panio wrote:
> dt-bindings: arm: qcom: Add Xiaomi Pad 6 (xiaomi-pipa)
Your subject is not correct.
>
> Add a compatible for Xiaomi Pad 6.
>
> Signed-off-by: Luka Panio
>
> ---
> Update commit message
Please include full changelog. This is v5 so what happened between
On 22/10/2023 19:38, Luka Panio wrote:
> Initial support for Xiaomi Pad 6 tablet, that have sm8250 soc.
>
> Signed-off-by: Luka Panio
> ---
> v2:
> Update commit message. Drop reserved gpio's as this device in reality do not
> have gpio, and pins are not protected.
>
> v3:
> Update commit mess
On 22/10/2023 19:26, Luka Panio wrote:
>>> dt-bindings: arm: qcom: Add Xiaomi Pad 6 (xiaomi-pipa)
>
>> Your subject is not correct.
>
> Sorry, but what should be there?
Your subject is:
"From: Luka Panio"
Subject contains git commit subject. See git log --- PATH for ideas.
>
>> Please include
On 22/10/2023 21:56, Luka Panio wrote:
> On Sun, Oct 22, 2023 at 8:46 PM Krzysztof Kozlowski
> wrote:
>
>> If there are no other copyrights here, why did you use BSD-3 license?
> I am by no means a licensing expert, but as sm8250.dts did use BSD-3
> and other device tree&
On 23/10/2023 08:50, Luka Panio wrote:
>> Did you base your work on these files? This would explain the license,
>> but then please include original copyrights.
> No, but the sm8250.dtsi that I do include has that license. Same as
> all other sm8250 device's dts's so i thought mine should not be
>
On 23/10/2023 11:02, Luka Panio wrote:
> Initial support for Xiaomi Pad 6 tablet, that have sm8250 soc.
>
> Signed-off-by: Luka Panio
> ---
> v2:
> Update commit message. Drop reserved gpio's as this device in reality do not
> have gpio, and pins are not protected.
>
> v3:
> Update commit messa
On 24/10/2023 08:37, Luka Panio wrote:
> Initial support for Xiaomi Pad 6 tablet, that have sm8250 soc.
>
> Signed-off-by: Luka Panio
> ---
> v2:
Acked-by: Krzysztof Kozlowski
Best regards,
Krzysztof
On 12/12/2023 17:39, Ninad Palsule wrote:
> From: Andrew Geissler
>
> Add a device tree for IBM system1 BMC board. It uses AST2600 SOC.
>
> Tested:
> This board is tested using the simics simulator.
>
> Signed-off-by: Andrew Geissler
> Signed-off-by: Ninad Palsule
> ---
> arch/arm/boot/d
On 12/12/2023 17:40, Ninad Palsule wrote:
> This commit adds i2c devices and muxes.
>
> Tested:
> This board is tested using the simics simulator.
>
> Signed-off-by: Ninad Palsule
> ---
> .../dts/aspeed/aspeed-bmc-ibm-system1.dts | 577 ++
> 1 file changed, 577 insertion
On 12/12/2023 17:40, Ninad Palsule wrote:
> This commit adds different voltage regulators.
>
> Tested:
> This board is tested using the simics simulator.
>
> Signed-off-by: Ninad Palsule
> ---
> .../dts/aspeed/aspeed-bmc-ibm-system1.dts | 266 ++
Squash it.
> 1 file ch
On 12/12/2023 17:40, Ninad Palsule wrote:
> This commit adds following devices to the device tree.
> - GPIO pin assignements, GPIO expansion devices
> - LED brinker devices
> - Fan controllers
>
> Tested:
> This board is tested using the simics simulator.
>
> Signed-off-by: Ninad Palsule
> -
On 12/12/2023 17:40, Ninad Palsule wrote:
> This drop adds following devices in the device tree.
> - EEPROM/VPD
> - Power supplies
> - Humidity, pressure and temperature sensors.
> - Trusted platform module(TPM) chip
>
> Tested:
> This board is tested using the simics simulator.
>
> Signed-of
On 13/12/2023 20:02, Ninad Palsule wrote:
> Hello Krzysztof,
>
> On 12/12/23 14:26, Krzysztof Kozlowski wrote:
>> On 12/12/2023 17:40, Ninad Palsule wrote:
>>> This drop adds following devices in the device tree.
>>> - EEPROM/VPD
>>> - Power supplie
On 13/12/2023 20:49, Ninad Palsule wrote:
> Hello Krzysztof,
>
> On 12/13/23 13:37, Krzysztof Kozlowski wrote:
>> On 13/12/2023 20:02, Ninad Palsule wrote:
>>> Hello Krzysztof,
>>>
>>> On 12/12/23 14:26, Krzysztof Kozlowski wrote:
>>>> On
On 14/12/2023 19:34, Ninad Palsule wrote:
>>> chosen {
>>> stdout-path = &uart5;
>>> bootargs = "console=ttyS4,115200n8 earlycon";
>>> @@ -54,10 +113,12 @@ vga_memory: region@bf00 {
>>> reg = <0xbf00 0x0100>; /* 16M */
>>> };
On 08/01/2024 21:41, Ninad Palsule wrote:
> Document the new compatibles used on IBM system1-bmc
>
> Signed-off-by: Ninad Palsule
Acked-by: Krzysztof Kozlowski
Best regards,
Krzysztof
On 08/01/2024 21:41, Ninad Palsule wrote:
> Infineon DPS310 is a barometric pressure and temperature sensor.
>
> Signed-off-by: Ninad Palsule
> ---
Acked-by: Krzysztof Kozlowski
Best regards,
Krzysztof
t;>>>> Delete this from every patch that it appears from.
>>>
>>> I have send it as a separate commit.
>>> https://lore.kernel.org/linux-kernel/20231214144954.3833998-1-ni...@linux.ibm.com/
>> Why did you do that? It now just adds undocumented compatibles to
ds undocumented compatibles to the
>>>> driver. Please, as Rob requested, work with Lukas on his series to make
>>>> sure that these devices are documented.
>>> I think krzysztof kozlowski suggested to send these patches separately:
>>> https://lore.kernel.
On 10/01/2024 16:54, Ninad Palsule wrote:
> Hello Krzysztof,
>
>
> On 1/10/24 09:37, Krzysztof Kozlowski wrote:
>> On 10/01/2024 15:31, Ninad Palsule wrote:
>>> Hello Krzysztof,
>>>
>>>
>>>
>>>>>>> I have
On 10/01/2024 20:06, Guenter Roeck wrote:
> On 1/10/24 09:54, Krzysztof Kozlowski wrote:
>> On 10/01/2024 16:54, Ninad Palsule wrote:
>>> Hello Krzysztof,
>>>
>>>
>>> On 1/10/24 09:37, Krzysztof Kozlowski wrote:
>>>> On 10/
On 10/01/2024 21:34, Krzysztof Kozlowski wrote:
>>>>>>>>>> I have send it as a separate commit.
>>>>>>>>>> https://lore.kernel.org/linux-kernel/20231214144954.3833998-1-ni...@linux.ibm.com/
>>>>>>>>> Why did
On 11/01/2024 19:12, Ninad Palsule wrote:
> Document the new compatibles used on IBM system1-bmc
>
> Signed-off-by: Ninad Palsule
> ---
> Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 +
> 1 file changed, 1 insertion(+)
This is a friendly reminder during the review process.
It l
On 11/01/2024 19:12, Ninad Palsule wrote:
> Infineon DPS310 is a barometric pressure and temperature sensor.
>
> Signed-off-by: Ninad Palsule
This is a friendly reminder during the review process.
It looks like you received a tag and forgot to add it.
If you do not know the process, here is a
On 31/01/2024 11:51, Svyatoslav Ryhel wrote:
> Add missing LG Electronics, Inc. prefix used by some older devices.
>
> Signed-off-by: Svyatoslav Ryhel
> ---
NAK, same reasons as before:
https://lore.kernel.org/all/9942f964-442e-e782-3926-6d7d11234...@canonical.com/
Best regards,
Krzysztof
On 31/01/2024 17:06, Svyatoslav wrote:
>
>
> 31 січня 2024 р. 18:02:31 GMT+02:00, Conor Dooley
> написав(-ла):
>> On Wed, Jan 31, 2024 at 05:30:58PM +0200, Svyatoslav wrote:
>>>
>>>
>>> 31 січня 2024 р. 17:28:49 GMT+02:00, Conor Dooley
>>> написав(-ла):
On Wed, Jan 31, 2024 at 12:51:50PM
On 31/01/2024 11:51, Svyatoslav Ryhel wrote:
> From: Maxim Schwalm
>
> Add a compatible for the LG Optimus Vu P895 and Optimus 4X P880.
>
> Signed-off-by: Maxim Schwalm
> ---
> Documentation/devicetree/bindings/arm/tegra.yaml | 8
> 1 file changed, 8 insertions(+)
>
> diff --git a/Do
On 31/01/2024 11:51, Svyatoslav Ryhel wrote:
> Add device-tree for LG Optimus Vu P895, which is a NVIDIA
> Tegra30-based smartphone, orignally running Android.
>
> Signed-off-by: Svyatoslav Ryhel
> ---
> arch/arm/boot/dts/nvidia/Makefile|1 +
> arch/arm/boot/dts/nvidia/tegra30-lg
On 01/02/2024 10:20, Svyatoslav Ryhel wrote:
> From: Maxim Schwalm
>
> Add a compatible for the LG Optimus Vu P895 and Optimus 4X P880.
>
> Signed-off-by: Maxim Schwalm
> Signed-off-by: Svyatoslav Ryhel
> ---
Acked-by: Krzysztof Kozlowski
Best regards,
Krzysztof
On 01/02/2024 10:20, Svyatoslav Ryhel wrote:
> + pinmux@7868 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&state_default>;
> +
> + state_default: pinmux {
> + /* WLAN SDIO pinmux */
> + host_wlan_wake {
Not mu
On 01/02/2024 10:51, Svyatoslav Ryhel wrote:
> чт, 1 лют. 2024 р. о 11:22 Krzysztof Kozlowski
> пише:
>>
>> On 01/02/2024 10:20, Svyatoslav Ryhel wrote:
>>> + pinmux@7868 {
>>> + pinctrl-names = "default";
On 12/02/2024 14:10, Konrad Dybcio wrote:
> This chip seems to have an IRQ line, let us describe it.
>
> Signed-off-by: Konrad Dybcio
Subject: ASoC: dt-bindings: cs35l45..
Acked-by: Krzysztof Kozlowski
Best regards,
Krzysztof
On 12/02/2024 14:10, Konrad Dybcio wrote:
> Document the SM8550 SONY Xperia 1 V (PDX234) board.
>
> Signed-off-by: Konrad Dybcio
Acked-by: Krzysztof Kozlowski
Best regards,
Krzysztof
On 26/02/2024 06:55, Raihan Ahamed wrote:
> Lenovo P2 is a handset using the MSM8953 SoC released in 2016
>
> Add a device tree for with initial support for:
>
> - GPIO keys
> - SDHCI (internal and external storage)
> - USB Device Mode
> - WCNSS (WiFi/BT)
> - Regulators
>
> Signed-off-by: Raihan
ead) your
patchsets to some other threads (unrelated or older versions). This
buries them deep in the mailbox and might interfere with applying entire
sets.
Acked-by: Krzysztof Kozlowski
---
This is an automated instruction, just in case, because many review tags
are being ignored. If you
>
> Acked-by: Rob Herring
> Acked-by: Krzysztof Kozlowski
No, these did not happen!
Best regards,
Krzysztof
On 27/02/2024 05:33, Raihan Ahamed wrote:
> I have checked again with latest dtschema before sending version 3 it
> doesn't give anything related to gpu and iommu
At least the second warning looks real, but the error was already there
- in the DTSI.
Best regards,
Krzysztof
On 01/03/2024 14:41, Tengfei Fan wrote:
> Document QCS8550 SoC and the AIM300 AIoT board bindings.
> QCS8550 is derived from SM8550. The difference between SM8550 and
> QCS8550 is QCS8550 doesn't have modem RF system. QCS8550 is mainly used
> in IoT scenarios.
> AIM300 Series is a highly optimized
On 06/03/2024 08:30, Odelu Kukatla wrote:
> Added clock property to enable clocks required for accessing
> qos registers.
>
> Signed-off-by: Odelu Kukatla
> ---
> .../interconnect/qcom,sc7280-rpmh.yaml| 49 +++
> 1 file changed, 49 insertions(+)
>
> diff --git
> a/Docum
On 06/03/2024 08:30, Odelu Kukatla wrote:
> It adds QoS support for QNOC device and includes support for
> configuring priority, priority forward disable, urgency forwarding.
> This helps in priortizing the traffic originating from different
> interconnect masters at NoC(Network On Chip).
>
> Sign
s a highly optimized family of modules designed to
> support AIoT applications. It integrates QCS8550 SoC, UFS and PMIC chip
> etc.
> AIM stands for Artificial Intelligence Module. AIoT stands for AI IoT.
>
> Signed-off-by: Tengfei Fan
Reviewed-by: Krzysztof Kozlowski
Best regards,
Krzysztof
On 25/03/2024 19:16, Odelu Kukatla wrote:
> Added clock property to enable clocks required for accessing
> qos registers.
>
> Signed-off-by: Odelu Kukatla
> ---
> .../bindings/interconnect/qcom,sc7280-rpmh.yaml| 14 ++
> 1 file changed, 14 insertions(+)
>
> diff --git
> a/Docum
On 26/03/2024 21:56, Konrad Dybcio wrote:
> On 25.03.2024 7:16 PM, Odelu Kukatla wrote:
>> It adds QoS support for QNOC device and includes support for
>> configuring priority, priority forward disable, urgency forwarding.
>> This helps in priortizing the traffic originating from different
>> inter
On 27/03/2024 12:35, Odelu Kukatla wrote:
>>> maxItems: 1
>>>
>>> + clocks:
>>> +minItems: 1
>>> +maxItems: 2
>>
>> Why is this flexible? Nothing in commit msg explains that. I gave the
>> same talk twice, gave there examples, yet it is not enough...
>>
>
> Clocks property is optio
On 15/07/2024 10:32, Bingwu Zhang wrote:
> From: Bingwu Zhang
>
> Add pstore node to allow for retrieving crash logs.
>
> Tested-by: Bingwu Zhang # on SM-G9008W
> (samsung-kltechn)
Tested-by tags are provided by others, not by yourself. It's expected
that you test youro own patches. Drop the
On 29/07/2024 22:18, Danila Tikhonov wrote:
> Add Soc ID table entries for Qualcomm SM7325 family.
>
> Signed-off-by: Danila Tikhonov
> ---
Reviewed-by: Krzysztof Kozlowski
Best regards,
Krzysztof
On 29/07/2024 22:18, Danila Tikhonov wrote:
> Add Qualcomm SM7325/SM7325P (yupik) SoC IDs.
>
> Signed-off-by: Danila Tikhonov
> ---
> include/dt-bindings/arm/qcom,ids.h | 2 ++
> 1 file changed, 2 insertions(+)
Reviewed-by: Krzysztof Kozlowski
Best regards,
Krzysztof
On 29/07/2024 22:18, Danila Tikhonov wrote:
> The SM7325 Linux Android firmware needs this workaround as well. Add it
> to the list.
>
> Signed-off-by: Danila Tikhonov
> ---
> drivers/usb/typec/ucsi/ucsi_glink.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/usb/typec/ucsi/ucs
On 29/07/2024 22:18, Danila Tikhonov wrote:
> The Qualcomm Snapdragon 778G/778G+/780G/782G uses CPUs named Kryo 670.
> Add the compatible string in the documentation.
>
> Signed-off-by: Danila Tikhonov
> ---
> Documentation/devicetree/bindings/arm/cpus.yaml | 1 +
Acked-by: K
On 29/07/2024 22:18, Danila Tikhonov wrote:
> Add entry for Nothing Technology Limited (https://nl.nothing.tech/)
>
> Signed-off-by: Danila Tikhonov
> ---
Acked-by: Krzysztof Kozlowski
Best regards,
Krzysztof
On 29/07/2024 22:18, Danila Tikhonov wrote:
> From: Eugene Lepshy
>
> Add device tree for the Nothing Phone 1 (nothing,spacewar) smartphone
> which is based on the SM7325 SoC.
...
> +
> +&i2c2 {
> + clock-frequency = <10>;
> + status = "okay";
> +
> + /* nxp,tfa9873 (EAR speaker
On 29/07/2024 22:18, Danila Tikhonov wrote:
> Nothing Phone 1 (nothing,spacewar) is a smartphone based on the SM7325
> SoC.
>
> Signed-off-by: Danila Tikhonov
Reviewed-by: Krzysztof Kozlowski
Best regards,
Krzysztof
On 31/10/2024 09:24, Andreas Kemnade wrote:
> Am Thu, 31 Oct 2024 09:18:49 +0100
> schrieb Krzysztof Kozlowski :
>
>> On Wed, Oct 30, 2024 at 09:18:43PM +, Mithil Bavishi wrote:
>>> Add samsung-espresso7 codename for the 7 inch variant
>>>
On Wed, Oct 30, 2024 at 09:18:43PM +, Mithil Bavishi wrote:
> Add samsung-espresso7 codename for the 7 inch variant
>
> Signed-off-by: Mithil Bavishi
> ---
> Documentation/devicetree/bindings/arm/ti/omap.yaml | 1 +
> 1 file changed, 1 insertion(+)
>
This is v2, so where is the changelog? S
On Wed, Oct 30, 2024 at 09:18:44PM +, Mithil Bavishi wrote:
> Create a device tree for the 3 inch variants (P3100, P3110, P3113)
3 inch variants of what? Describe here the hardware.
>
> Signed-off-by: Mithil Bavishi
> ---
Please use subject prefixes matching the subsystem. You can get them
On 04/02/2025 19:22, Ivaylo Ivanov wrote:
>> +
>> +#include
>> +#include
>> +#include
>> +
>> +/ {
>> +compatible = "samsung,exynos7870";
>> +#address-cells = <2>;
>> +#size-cells = <1>;
>> +
>> +/* Samsung's bootloader (S-BOOT) checks for these DT properties */
>> +model_inf
On Fri, Jan 24, 2025 at 05:18:19AM +, Willie Thai wrote:
> From: wthai
This does not match SoB.
>
> The GB200NVL BMC is an Aspeed Ast2600 based BMC
> for Nvidia Blackwell GB200NVL platform.
>
> Signed-off-by: wthai
Full name.
> ---
> .../bindings/arm/aspeed/aspeed.yaml |
On Wed, Jan 15, 2025 at 09:35:56PM +0100, Duje Mihanović wrote:
> Add DTS for Marvell PXA1908 SoC and Samsung Galaxy Core Prime Value
> Edition LTE, a smartphone based on said SoC.
>
> Signed-off-by: Duje Mihanović
> ---
> arch/arm64/boot/dts/marvell/Makefile | 3 +
> .../dts/mar
On Wed, Jan 15, 2025 at 09:35:55PM +0100, Duje Mihanović wrote:
> Add ARCH_MMP configuration option for Marvell PXA1908 SoC.
>
> Signed-off-by: Duje Mihanović
> ---
> arch/arm64/Kconfig.platforms | 8
> 1 file changed, 8 insertions(+)
Reviewed-by: Krzysztof Kozlow
On Wed, Jan 15, 2025 at 09:35:57PM +0100, Duje Mihanović wrote:
> Add myself as the maintainer for Marvell PXA1908 SoC support.
>
> Signed-off-by: Duje Mihanović
> ---
> MAINTAINERS | 9 +
> 1 file changed, 9 insertions(+)
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index
> a87ddad78e
On 16/01/2025 16:47, Duje Mihanović wrote:
>>>
>>> +ARM/Marvell PXA1908 SOC support
>>> +M: Duje Mihanović
>>> +L: linux-arm-ker...@lists.infradead.org (moderated for non-subscribers)
>>> +S: Maintained
>>> +T: git https://gitlab.com/LegoLivesMatter/linux
>>
>> Not sure if this was mentioned ever
On Wed, Feb 19, 2025 at 12:33:11AM +0530, Kaustabh Chakraborty wrote:
> Document the compatible string "samsung,exynos7870-chipid". The
> registers are entirely compatible with "samsung,exynos4210-chipid".
A bit odd (exynos7885 is compatible with 850), but I guess you really
checked that.
Best re
On Wed, Feb 19, 2025 at 12:33:13AM +0530, Kaustabh Chakraborty wrote:
> Add the product ID of Exynos7870 (S5E7870) to the existing list.
>
> Signed-off-by: Kaustabh Chakraborty
> ---
> drivers/soc/samsung/exynos-chipid.c | 1 +
> 1 file changed, 1 insertion(+)
>
This does not apply anymore - c
os-chipid: add exynos7870-chipid
compatible
https://git.kernel.org/krzk/linux/c/0a86ea5534a9e4ae988a2e174e741b102d8a8691
Best regards,
--
Krzysztof Kozlowski
On Wed, Feb 19, 2025 at 12:33:10AM +0530, Kaustabh Chakraborty wrote:
> Samsung Exynos 7870 (codename: Joshua) is an ARM-v8 system-on-chip that was
> announced in 2016. The chipset was found in several popular mid-range to
> low-end Samsung phones, released within 2016 to 2019.
>
> This patch seri
On 24/02/2025 14:02, André Draszik wrote:
> On Mon, 2025-02-24 at 06:48 -0600, Rob Herring (Arm) wrote:
>>
>> On Mon, 24 Feb 2025 10:28:49 +, André Draszik wrote:
>>> Add device tree binding for the Maxim MAX77759 companion PMIC for USB
>>> Type-C applications.
>>>
>>> The MAX77759 includes Bat
On 24/02/2025 11:28, André Draszik wrote:
> + gpio-controller: true
> +
> + "#gpio-cells":
> +const: 2
> +
> + gpio:
> +$ref: /schemas/gpio/maxim,max77759-gpio.yaml
There is no such file at this moment, so this is not bisectable. What's
more, even if you fix it, you will have dependency
or the USB PHY).
>
>
Applied, thanks!
[1/7] dt-bindings: soc: samsung: exynos-pmu: add exynos7870-pmu compatible
https://git.kernel.org/krzk/linux/c/bf869ecfb8d3d0fef07ed2752df93c977cc257b6
Best regards,
--
Krzysztof Kozlowski
k/linux/c/13a24175005fad410464bee482ed58af144ba250
Best regards,
--
Krzysztof Kozlowski
On 28/02/2025 20:46, Kaustabh Chakraborty wrote:
> Additional features implemented in this series include:
> * I2C- touchscreen, IIO sensors, etc.
> * UART - bluetooth and serial debugging
> * MMC- eMMC, Wi-Fi SDIO, SDCard
> * USB- micro-USB 2.0 interface
>
> Buil
ilbox and might
interfere with applying entire sets.
> Signed-off-by: Gabriel Gonzales
> ---
> Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
> 1 file changed, 1 insertion(+)
Acked-by: Krzysztof Kozlowski
---
This is an automated instruction, just in case, because many
y: Mars Yang
> Cc: Krzysztof Kozlowski
> Cc: Andrew Lunn
> Cc: Paul Menzel
> Link: Reference to Ast2600 SOC: https://www.aspeedtech.com/server_ast2600/ [1]
> Link: Reference to Blackwell GB200NVL Platform:
> https://nvdam.widen.net/s/wwnsxrhm2w/blackwell-datasheet-3384703 [2]
L
80 matches
Mail list logo
