On Wed, Jan 15, 2025 at 09:35:56PM +0100, Duje Mihanović wrote:
> Add DTS for Marvell PXA1908 SoC and Samsung Galaxy Core Prime Value
> Edition LTE, a smartphone based on said SoC.
>
> Signed-off-by: Duje Mihanović <duje.mihano...@skole.hr>
> ---
> arch/arm64/boot/dts/marvell/Makefile | 3 +
> .../dts/marvell/pxa1908-samsung-coreprimevelte.dts | 336
> +++++++++++++++++++++
> arch/arm64/boot/dts/marvell/pxa1908.dtsi | 300 ++++++++++++++++++
> 3 files changed, 639 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/marvell/Makefile
> b/arch/arm64/boot/dts/marvell/Makefile
> index
> ce751b5028e2628834340b5c50f8992092226eba..39c5749e631db33aa8fb0386a951c0a70215bc02
> 100644
> --- a/arch/arm64/boot/dts/marvell/Makefile
> +++ b/arch/arm64/boot/dts/marvell/Makefile
> @@ -32,3 +32,6 @@ dtb-$(CONFIG_ARCH_MVEBU) += cn9130-cf-base.dtb
> dtb-$(CONFIG_ARCH_MVEBU) += cn9130-cf-pro.dtb
> dtb-$(CONFIG_ARCH_MVEBU) += cn9131-cf-solidwan.dtb
> dtb-$(CONFIG_ARCH_MVEBU) += cn9132-clearfog.dtb
> +
> +# MMP SoC Family
> +dtb-$(CONFIG_ARCH_MMP) += pxa1908-samsung-coreprimevelte.dtb
Hm, why separate ARCH if this is part of Marvell Makefile? One ARCH per
vendor, so if you think this is different than MVEBU, then should be in
a separate subdirectory of marvell.
> diff --git a/arch/arm64/boot/dts/marvell/pxa1908-samsung-coreprimevelte.dts
> b/arch/arm64/boot/dts/marvell/pxa1908-samsung-coreprimevelte.dts
> new file mode 100644
> index
> 0000000000000000000000000000000000000000..83b789a837d3876bf15ed0d7e10e190eacdfd56f
> --- /dev/null
> +++ b/arch/arm64/boot/dts/marvell/pxa1908-samsung-coreprimevelte.dts
> @@ -0,0 +1,336 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +#include "pxa1908.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/linux-event-codes.h>
> +
> +/ {
> + model = "Samsung Galaxy Core Prime VE LTE";
> + compatible = "samsung,coreprimevelte", "marvell,pxa1908";
> +
> + aliases {
> + mmc0 = &sdh2; /* eMMC */
> + mmc1 = &sdh0; /* SD card */
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + stdout-path = "serial0:115200n8";
> +
> + /* S-Boot places the initramfs here */
> + linux,initrd-start = <0x4d70000>;
> + linux,initrd-end = <0x5000000>;
> +
> + fb0: framebuffer@17177000 {
> + compatible = "simple-framebuffer";
> + reg = <0 0x17177000 0 (480 * 800 * 4)>;
> + width = <480>;
> + height = <800>;
> + stride = <(480 * 4)>;
> + format = "a8r8g8b8";
> + };
> + };
> +
> + /* Bootloader fills this in */
> + memory {
> + device_type = "memory";
> + reg = <0 0 0 0>;
> + };
> +
> + reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + framebuffer@17000000 {
> + reg = <0 0x17000000 0 0x1800000>;
> + no-map;
> + };
> +
> + gpu@9000000 {
> + reg = <0 0x9000000 0 0x1000000>;
> + };
> +
> + /* Communications processor, aka modem */
> + cp@5000000 {
> + reg = <0 0x5000000 0 0x3000000>;
> + };
> +
> + cm3@a000000 {
> + reg = <0 0xa000000 0 0x80000>;
> + };
> +
> + seclog@8000000 {
> + reg = <0 0x8000000 0 0x100000>;
> + };
> +
> + ramoops@8100000 {
> + compatible = "ramoops";
> + reg = <0 0x8100000 0 0x40000>;
> + record-size = <0x8000>;
> + console-size = <0x20000>;
> + max-reason = <5>;
> + };
> + };
> +
> +
If there is going to be resend/new version:
Just one blank line.
Best regards,
Krzysztof
