\version "2.6.3"
\score { \new Staff { \relative c'{
\key g \major
\clef violin
\time 2/4
#(override-auto-beam-setting '(end * * * *) 1 4 )
c16. c32 c8 c4 %Bar 1
c8 c16. c32 c4 %Bar 2
}}}
The result can be seen here:
http://pocentek.perso.cegetel.net/test-overri
--- [EMAIL PROTECTED] wrote:
> Aaron Mehl wrote:
>
> > but actually for each word the letters are in the
> > correct order but the words themselves go left to
> > right instead of right to left.
>
> With automatic text reversal, I would expect
> \markup { ONE TWO THREE }
> to produce
Erik Sandberg wrote:
> It requires some Scheme hacking though, and you need to know about the
> internal representation of Music Expressions. It's probably doable in
> less than 20 lines of code, including colour codes.
Where does there exist a systematic explanation of the details of
-- LilyPond
Graham Percival wrote:
If you haven't already, try reading section 8.6.2 from the documentation
for 2.7. The docs have been (hopefully) clarified, and it will all apply
to 2.6 as well.
Done. The documentation seems clear to me, but there's something I don't
understand.
Here is a short exam
Aaron Mehl wrote:
> but actually for each word the letters are in the
> correct order but the words themselves go left to
> right instead of right to left.
With automatic text reversal, I would expect
\markup { ONE TWO THREE }
to produce
ENO OWT EERHT
But, with a pair of quot
Georg -- the thing to do is to send these to the bug- mailist, as I've
done.
These two commands don't work. The first has no effect; the
second produces an error message as described below.
\markup{ \caps Bla }
\markup{ \char #65 }
Cheers,
- Graham
On 22-Aug-05, at 8:47 AM, Georg Dummer wrote
Hi again,
The problem is that I am not entering new music but
correcting existing notation, so that there are
already 50 measures written and I just corrected
measure 4.
but maybe it will help, I will give it a try I guess
if I just pretend that there is no music after measure
5 whats the differ
On 22-Aug-05, at 3:06 PM, Erik Sandberg wrote:
On Monday 22 August 2005 21.24, Jay Hamilton, Sound and Silence wrote:
But then Mats/Graham and others keep on recommending staying with
'stable' which won't have the 'needed' features. I'd love a
clarification on this one.
It depends on what y
On 22-Aug-05, at 10:07 AM, Hans de Rijck wrote:
I've read that. It describes how it works, but not on what objects.
From examples all over the manual one can extract some objects
(Staff, Stem,
Voice) and some properties (skipBars, MetronomeMark, Stem etc) but
there is
no list of all these. At
On 22-Aug-05, at 6:15 PM, Kris Shaffer wrote:
One more question on this issue:
The commands \fatText and \emptyText have no effect on either
s1*0^\markup {whatever}
R1*4
or
R1*4^\markup {whatever}
How can I automatically apply the width of the markup string to the
w
On 22-Aug-05, at 12:31 PM, Gauvain Pocentek wrote:
es16.[ es32 d16. c32]
and I'd like beaming to be automatically set as in the above exemple,
without using [].
I've tried many things like:
#(override-auto-beam-setting '(end * * * *) 1 4 )
If you haven't already, try reading section
On 22-Aug-05, at 5:28 AM, Mats Bengtsson wrote:
- There are no installation instructions at all. Do you expect an
average Windows user to know what to do with a ZIP file with
a number of .exe?
Judging from the spread of trojans and viruses in the windows
world, I'd say yes. ;-)
Cheers,
-
One more question on this issue:
The commands \fatText and \emptyText have no effect on either
s1*0^\markup {whatever}
R1*4
or
R1*4^\markup {whatever}
How can I automatically apply the width of the markup string to the width
of the multi-rest bar?
Kris Shaffer
On
On Friday 19 August 2005 17.50, Kenneth Lee wrote:
> Hi,
>
> i would like to color the note-head by its note-name
> on the whole score. For example, to color every C with
> red and every D with yellow, for example.
>
> i have tried \applyoutput but it only work on the note
> that follows immediatel
On Monday 22 August 2005 23.47, Aaron Mehl wrote:
> Hi all,
>
> Is there a way to not have to reparse a file each time
> I want to view changes?
>
> Something where only the newest changes are parsed or
> the pdf is updated in almost realtime?
>
> I am using vim.
If you're using 2.7, there is a co
On Monday 22 August 2005 21.24, Jay Hamilton, Sound and Silence wrote:
> Alas that did not solve the problem in 2.7.4 but it did solve it for
> 2.6.x so at least I've got a good copy now.
> Thanks all.
> Jay
> BTW there does seem to be disagreement on the list, I am under the
> impression that Han
Website. OK today.
-Original Message-
From: John Mandereau [mailto:[EMAIL PROTECTED]
Sent: Tuesday, August 16, 2005 3:21 PM
To: Fairchild
Cc: lilypond-user@gnu.org
Subject: Re: 2.4 doc links broke?
Fairchild wrote:
> I can't open the regression tests or tips and tricks for v2.4?? My
Hi all,
Is there a way to not have to reparse a file each time
I want to view changes?
Something where only the newest changes are parsed or
the pdf is updated in almost realtime?
I am using vim.
Thanks
Aaron
Start your day
Jay Hamilton, Sound and Silence wrote:
Alas that did not solve the problem in 2.7.4 but it did solve it for
2.6.x so at least I've got a good copy now.
Thanks all.
Jay
BTW there does seem to be disagreement on the list, I am under the
impression that Han-Wen thinks 2.7x are usable and therefor
On Mon, 22 Aug 2005, Han-Wen Nienhuys wrote:
> results for the Tie rewrite are at
>
> http://localhost/lilypond/doc/v2.7/Documentation/topdocs/out-www/NEWS.html
Sorry, but that should be:
http://lilypond.org/doc/v2.7/Documentation/topdocs/out-www/NEWS.html
__
On Monday 22 August 2005 14.04, fiëé visuëlle wrote:
> >> In the attached example, the acciaccatura in the lower voice doubles
> >> the repeat end bar and goes behind that wrong bar.
> >
> > It is a known bug. The workaround is to add dummy grace notes in
> > all parts,
> > like
> > <<
> > { \rep
On Monday 22 August 2005 19.46, Han-Wen Nienhuys wrote:
> hi,
>
> results for the Tie rewrite are at
>
> http://localhost/lilypond/doc/v2.7/Documentation/topdocs/out-www/NEWS.html
.. which of course should be:
http://lilypond.org/doc/v2.7/Documentation/topdocs/out-www/NEWS.html
Looks great!
--
E
Alas that did not solve the problem in 2.7.4 but it did solve it for
2.6.x so at least I've got a good copy now.
Thanks all.
Jay
BTW there does seem to be disagreement on the list, I am under the
impression that Han-Wen thinks 2.7x are usable and therefore should be
used (and sometimes have to
Hello:
I'd like to suggest to all the Mac OS X users here that if they do not
already know the basics of a UNIX shell like what you find when you
open Terminal, that you take some time to find a tutorial on the web
and follow it through.
When you have done a few of the tutorials you will find usi
hi,
results for the Tie rewrite are at
http://localhost/lilypond/doc/v2.7/Documentation/topdocs/out-www/NEWS.html
--
Han-Wen Nienhuys - [EMAIL PROTECTED] - http://www.xs4all.nl/~hanwen
___
lilypond-user mailing list
lilypond-user@gnu.org
http://li
Hello,
I'm typesetting a piece with a lot of rhythms like:
es16.[ es32 d16. c32]
and I'd like beaming to be automatically set as in the above exemple,
without using [].
I've tried many things like:
#(override-auto-beam-setting '(end * * * *) 1 4 )
or
\set beatLength = #(ly:make-mo
Mats Bengtsson <[EMAIL PROTECTED]> writes:
> How about redefining the function that prints the page footer
> and include something like \fromproperty #'header:footnotes.
> Then you could do
> \score{
>some music
>\header{
> ...
> footnotes = ...
>}
> }
>
> The default definit
Mats,
I've read that. It describes how it works, but not on what objects.
>From examples all over the manual one can extract some objects (Staff, Stem,
Voice) and some properties (skipBars, MetronomeMark, Stem etc) but there is
no list of all these. At least, I can't find one. It would be handy t
On 21 Aug 2005, at 14:47, Rutger Hofman wrote:
Hans Aberg wrote:
On 21 Aug 2005, at 11:08, Han-Wen Nienhuys wrote:
I think /usr/local/bin/lilypond is the shell script to invoke it
from the command line. It currently says
# run the program
python "$INSTALLDIR/LilyPond.app/Contents
I have two problems with markup commands:
First:
\markup{ \caps Bla } (working in version 2.4.6)
does not produce capitalised letters in version >2.6.0
Second:
\markup{ \char #65 } (also in versions >2.6.0).
gives the following error:
Layout output to `MeineEngenGrenzen.ps'...ERROR: In procedure
Read "9.2 The \override command" in the manual with all subsections
to learn how to find the relevant information.
/Mats
Hans de Rijck wrote:
Kris and Mats,
thanks for your answers, I think I understand now.
Mats, is there a list somewhere of objects that can be overridden? In the
manual s
Am 2005-08-22 um 14:51 schrieb Mats Bengtsson:
Thank you, but it doesn't help.
I added dummy grace notes at every place in the upper voice where
I use one in the lower - no change.
You didn't change it in all parts. When I added a dummy grace note
also
to the chords, it seems to work bett
Am 2005-08-22 um 11:32 schrieb Mats Bengtsson:
This is a new feature in the latest development versions, 2.7.x.
Apart from the brief documentation in "8.1.7 Overview of text markup
commands", I think the best documentation is actually in the example
called markup-word-wrap.ly in the Regression T
> No, no - I'm sure it's an effect of Guido's time machine - some
> LilyPond Python script used "from __future__ import __version__"!
> ;-D
>
I had a feeling something like that might have been at work but I've
always been so bad at temporal mechanics that I was loath to even
suggest it. ;)
Take a look at the example called boxed-stencil.ly in the Tips and
Tricks document. There is a function called make-stencil-circler
that you can use the same way as make-stencil-boxer.
If you can't figure out the exact \override command you need, you
can find it at the end of this email, but I re
Kris and Mats,
thanks for your answers, I think I understand now.
Mats, is there a list somewhere of objects that can be overridden? In the
manual some (but I'm sure not all) are mentioned but only in examples. It
certainly would be helpfull to have such a list (eg. Staff.TimeSignature,
Score.ski
> the text layout is handled by Pango, so I guess it's
> a matter of passing
> the right options to Pango. I can look into it as a
> sponsored feature,
> if you like.
yes
how much would it cost?
Aarn
but actually for each word the letters are in the
correct order but the words themselves go le
I think if you override the NoteHead print-function to
\override Voice.NoteHead #'print-function = #Text_interface::print
and use
\override Voice.NoteHead #'text = #(markup #:circle #:musicglyph
"noteheads.s2"))
perhaps along with some #:raise or #:translate or extra-offset, you can
achieve thi
fiëé visuëlle wrote:
Am 2005-08-22 um 01:18 schrieb Erik Sandberg:
In the attached example, the acciaccatura in the lower voice doubles
the repeat end bar and goes behind that wrong bar.
It is a known bug. The workaro
Aaron Mehl wrote:
Hi again,
I got the markup of text below the staff to work, but
the hebrew is backwards, ouch.
Is there a specific command I must type to get the
text to bidi correctly?
Hi,
the text layout is handled by Pango, so I guess it's a matter of passing
the right options to Pango
I just tried http://lilypond.org/mingw/lilypond-tools-2.6.0.zip
and have some comments:
- convert-ly crashes with
Applying conversion: 2.5.0, 2.5.1, 2.5.2, 2.5.3, 2.5.12, 2.5.13,
Traceback (most
recent call last):
File "convert-ly.py", line 213, in ?
File "convert-ly.py", line 207, in main
hello lilypond-users,
is there a way to draw a circle around a note-head?
so far i tried it:
- with balloon help, but I didn't like the looks of it (btw: is there
a way to set the size of the balloon?)
- manually with \markup{ \circle " "} and extra-offset, which is
quite time-consuming
any
thanks everybody,
the #'extra-offset command worked fine for me.
stephen
Am 22.08.2005 um 09:50 schrieb Mats Bengtsson:
If you want to move something vertically, it's almost always better to
use the padding property instead of extra-offset. The reason is that
if you set padding, then LilyPond
Am 2005-08-22 um 09:17 schrieb Mats Bengtsson:
Looks like a silly packaging error. Just edit the converted .ly file
and replace "2.7.7" with "2.7.6" in the \version statement.
No, no - I'm sure it's an effect of Guido's time machine - some
LilyPond Python script used "from __future__ import
> "JN" == Jan Nieuwenhuizen <[EMAIL PROTECTED]> writes:
>> [tmp]# dpkg -l guile-1.6
>> ii guile-1.6 1.6.7-1The GNU extension language and Scheme
interp
JN> But this is only the package called guile. For the other packages
JN> (runtime libraries, eg), try
J
\version "2.6.3"
%#(ly:set-option (quote no-point-and-click))
\header{
title = "Karev Yom"
% poet = "T: "
composer = "Unbekannt"
% instrument = "2 voc + git"
source = ""
maintainer = "Henning Hraban Ramm"
maintainerWeb = "http://angerweit.tikon.ch/lieder/";
lastupdated = "2005-08-21"
}
glob
Hi again,
I got the markup of text below the staff to work, but
the hebrew is backwards, ouch.
Is there a specific command I must type to get the
text to bidi correctly?
Thanks
Aaron
If an example is needed I can send a png, I am not
sure how large attachments the list permits so I am
leaving i
Bertalan Fodor writes:
> I don't know if that's a bug, but that works like that.
Yes, that's a bug, and should be investigated and fixed.
Jan.
--
Jan Nieuwenhuizen <[EMAIL PROTECTED]> | GNU LilyPond - The music typesetter
http://www.xs4all.nl/~jantien | http://www.lilypond.org
If you have the OSX version installed, you can create a symlink to lilypond.sh
in /usr/local/bin and use it just as the commandline tool would work on Linux
or with the Fink version of LilyPond. Do
ln -s /usr/local/bin/lilypond.sh /usr/local/bin/lilypond
and open a new terminal window.
/Henri
Graham Percival wrote:
On 22-Aug-05, at 12:53 AM, Katrien de Vos wrote
Graham,
Thank you for your reaction. I have looked into README.txt but I
haven't found a clue. At least I do not recognize the script file -
supposing it has the word CONVERT in it -.
Please keep lilypond issues on th
I don't know if that's a bug, but that works like that. If you use the
command line, you can always type:
lilypond $PWD/test.ly
$PWD will mean your current directory wherever you are.
Bert
[EMAIL PROTECTED] wrote:
>Hi, I've installed lilypond 2.6.0-1 on Cygwin
>and it works well, but I cannot
This is a new feature in the latest development versions, 2.7.x.
Apart from the brief documentation in "8.1.7 Overview of text markup
commands", I think the best documentation is actually in the example
called markup-word-wrap.ly in the Regression Test document for version
2.7.
/Mats
Aaron Me
I noticed the same thing. Just change the \version statement and you are good
to go.
Henrik Frisk
>
> Looks like a silly packaging error. Just edit the converted .ly file
> and replace "2.7.7" with "2.7.6" in the \version statement.
>
> /Mats
>
> David Fedoruk wrote:
> > Hello all:
> >
>
In addition to all previous answers, you may also want to take a look
at http://lists.gnu.org/archive/html/bug-lilypond/2005-08/msg00130.html
for a (in my opinion) much simpler alternative.
/Mats
Will Oram wrote:
Does the template for centred dynamics in a piano staff found in the
2.6 manua
I guess that major problem is that you cannot even specify a \p
or \< within \chordmode {...}. Otherwise, it's easy to modify the
definition of the ChordNames context to take the dynamics into
account in the MIDI output.
One possibility is to include your dynamics in a separate identifier:
mydyn
See http://lists.gnu.org/archive/html/lilypond-user/2005-08/msg00419.html
/Mats
David Bobroff wrote:
I'm anticipating a possible need for lilypond-book. I've been
experimenting with a short file to see how everything interacts so I can
get a feel for how it works.
I've run into some unexpec
Version 2.4.2 is probably more recent than 2.5.2 (the latter is
a "unstable" development version that shouldn't have made its
way into any packaging system).
/Mats
[EMAIL PROTECTED] wrote:
Hi all,
I ran into this same problem with Gentoo Linux and version 2.5.2.
So I installed version 2.4.2
On 22-Aug-05, at 12:53 AM, Katrien de Vos wrote
Graham,
Thank you for your reaction. I have looked into README.txt but I
haven't found a clue. At least I do not recognize the script file -
supposing it has the word CONVERT in it -.
Please keep lilypond issues on the mailist, so that other p
As far as I understand, this copy/paste problem is only a problem if
you use the PDF version of the manual. The HTML version should work
better (especially if you click on the music example to see the
full input but make sure not to copy the trash at the top of the
file that's only needed to give
If you want to move something vertically, it's almost always better to
use the padding property instead of extra-offset. The reason is that
if you set padding, then LilyPond will realize that you have moved
something and migh for example add some extra spacing between the
staves to avoid that your
Just as Graham, I cannot repeat your problem. I tried both version 2.7.6
and 2.6.3. As always, I recommend the stable version 2.6.x for any
serious typesetting, unless you need one of the new features in 2.7.x.
/Mats
Jay Hamilton, Sound and Silence wrote:
I'm having a problem that I can't se
How about redefining the function that prints the page footer
and include something like \fromproperty #'header:footnotes.
Then you could do
\score{
some music
\header{
...
footnotes = ...
}
}
The default definition can be found in the function
oddFooterMarkup in the file .../ly/tit
Hi, I've installed lilypond 2.6.0-1 on Cygwin
and it works well, but I cannot give the file
name without its absolute path otherwise
lilypond tells that the file cannot be found.
For example I have to give the following
command:
lilypond /cygdrive/c/SHEET/test.ly
I'd like to give:
lilypon
Hi all,
I remember that a while ago there was a thread on this
but I can't seem to find it.
I need to place the extra lyrics below the notation as
blocks of text (not under the notation but way below
as text).
I am not even sure where to look this up in the docs.
Is it text markup?
Thanks
Aaron
Looks like a silly packaging error. Just edit the converted .ly file
and replace "2.7.7" with "2.7.6" in the \version statement.
/Mats
David Fedoruk wrote:
Hello all:
I downloaded the latest development version of lilypond for Mac OS X
(2.7.6-1 (vBuild from 19-08-2005 22:05). When I run Upd
I don't think you understood Han-Wen's answer. Everything will work
fine if you do
\override MultiMeasureRestText #'extra-offset = #'(0 . 2.0)
or (preferably)
\override MultiMeasureRestText #'padding = #2.0
As you can read in section 8.2.1, texts attached to multi
measure rests are handled by Mul
Laura Conrad writes:
> JN> I just ran a test that confirmed this happens if you use guile 1.6.4.
>
> Great, that must be my problem too.
>
> >> I don't know what to do ?
>
> JN> If you can, upgrade guile packages to 1.6.7.
>
> I don't seem to be able to do that. Dpkg seems to think
Thomas Ruedas writes:
> That's what I also got
Gee, you must have encountered the same problem.
> The bottomline is that you should first check that you have all required
> software in sufficiently recent versions.
No, the bottomline is that bugs should be reported. Autopackage
should resolve
68 matches
Mail list logo
