Re: LilyPond-mode in Emacs

> "David" == David Kastrup writes: David> That means that without additional care, XEmacs+LilyPond will fall David> victim to bitrot. David> However, that's preferable to LilyPond-mode falling victim to David> bitrot on all platforms. David> Is that ok with people? Fine

Re: Syntactical question [was: Re: Call for help with bar lines]

> "Marc" == Marc Hohl writes: >> I hope that the new interface both makes more sense than the old one, >> and still allows me to set barless music without ugly gaps where the bar >> lines aren't. Marc> Hmmm - with the new interface, nonexistent bar lines are not Marc> supp

Re: Syntactical question [was: Re: Call for help with bar lines]

> "David" == David Kastrup writes: >> \bar "" inserts an empty stencil, so the padding around the >> (invisible) bar line is preserved. David> Yes, I understood that. But what do we need that for? For the Renaissance music I transcribe, the composers weren't thinking in bar lin

Re: landscape mode in lilypond-book doesn't calculate line length correctly

> "David" == David Kastrup writes: David> Fragments may use the David> `papersize=STRING' David> Where STRING is a paper size defined in `scm/paper.scm' i.e. David> `a5', `quarto', `11x17' etc. David> Values not defined in `scm/paper.scm' will be ignored,

Re: landscape mode in lilypond-book doesn't calculate line length correctly

>>>>> "Laura" == Laura Conrad writes: Laura> When run on the attached file, lilypond-book sets the line Laura> length of the music to be much less than the actual width of Laura> the page that latex is using (which you can see by where it Laura&g

Re: Black mensural notation

> "Karl" == Karl Hammar writes: Karl> On line 22 in the ly-file: Karl> %% Accidentals are valid only once (same as Karl> Shouldn't the accidental be valid for the next note and any same Karl> repeted note, this has bothered me with the current white mesural Karl>

Re: What is the beef with \longa stems?

> "Valentin" == Valentin Villenave writes: Valentin> On Sat, Oct 9, 2010 at 7:01 PM, David Kastrup wrote: >> why are longas treated specially? Valentin> Though I don't know how to answer that question, I suspect Valentin> the answer might help solve Valentin> http://cod

Re: How to develop Emacs mode?

> "Nicolas" == Nicolas Sceaux writes: Nicolas> Several years ago, I used a midi keyboard to enter the notes: one hand Nicolas> on the midi keyboard, and one hand on the computer keyboard, to set Nicolas> durations, because I'm a lame keyboard player. But it turned out that

Re: lilypond-book turns longas below the staff into breves

> "Francisco" == Francisco Vila writes: >> Actually, what I did was print the part in a different clef.  It's >> really inauthentic to have music of that era (it was a transcription >> from the Odhecaton) with ledger lines anyway.  The new clef is a >> better option. Fran

Re: lilypond-book turns longas below the staff into breves

> "Francisco" == Francisco Vila writes: Francisco> it's a Longa with the cropped stem that makes it to Francisco> appear as a breve. Change g,\longa to Francisco>\longa Francisco> and the stem appears (the lower g still is cropped) Actually, what I did was print the par

lilypond-book turns longas below the staff into breves

The attached lilypond file displays the G below the staff correctly as a longa (square note with a tail) if you say "lilypond tenor-simple.ly". However, if you include it in the attached .lytex file, and "make tenorbook.pdf" with the attached makefile, the other \longas are still displayed correc

Re: using LyricHyphens in the docs

> "Trevor" == Trevor Daniels writes: Trevor> Mark Polesky wrote Tuesday, July 14, 2009 7:38 AM >> I think the "Salve, "Regína" example in NR 2.8 "Ancient Notation" >> would be improved by using LyricHyphens. For example, instead of >> "Sal- ve, Re- gí- na," use "Sal -- ve, Re

Re: Why is it _still_ so freaking hard to get info with images?

> "Johannes" == Johannes Schindelin writes: Johannes> Unfortunately, it is that way in Open Source. But not Johannes> only there... if you need a good quote by a famous Johannes> author to say the same: Johannes> So many people tut and say "Someone should do Johannes>

Re: starting 2.13 soon

> "John" == John Mandereau writes: >> Unless anybody complains within the next 48 hours, we'll switch to >> 2.13 and get started with all the major changes. John> What major changes are expected? Are there already significant John> changes that deserve switching to 2.13 very

Re: ideas for Google Summer of Code

> "Werner" == Werner LEMBERG writes: >> I'd especially like someone to look at some of the problems with >> lilypond-book. Particularly the margin settings. Werner> What exactly do you mean? One of the problems I was thinking about does seem to have been fixed on 2.12. The

Re: ideas for Google Summer of Code

I'd especially like someone to look at some of the problems with lilypond-book. Particularly the margin settings. I would think the reason those problems haven't been fixed is that it's more than a few hours to do it, but I would really be surprised if it were more than two months. -- Laura

Re: why is Dutch the default language for note-entry?

>>>>> "Hans" == Hans Aberg writes: Hans> On 18 Dec 2008, at 16:53, Laura Conrad wrote: Hans> Perhaps LilyPond users should agree on one keyboard layout - Hans> it takes some effort to do. >> >> This is the kind of suggestion that

Re: why is Dutch the default language for note-entry?

> "Hans" == Hans Aberg writes: Hans> Perhaps LilyPond users should agree on one keyboard layout - Hans> it takes some effort to do. This is the kind of suggestion that would only be made by a music software person who had never worked with vocal music. -- Laura (mailto:lcon...@l

Re: Making the lilypond documentation ready for 2.12

> "Graham" == Graham Percival <[EMAIL PROTECTED]> writes: Graham> 2.11.65 is so much better than 2.10.33 that it's ridiculous. For Graham> the past year we've been telling everybody to use/read 2.11.x Graham> instead of 2.10, but that only reaches people on -user. It's past

lilypond-book in 2.11.57

I'm doing my first big project on 2.11, and I've gotten to the stage where I want to print several movements of a sonata as one pdf document. My 2.10 makefile doesnt' work, because lilypond-book no longer has a --psfonts option. So I looked at the documentation

Re: Should \relative be the default for musicxml2ly

> "Mats" == Mats Bengtsson <[EMAIL PROTECTED]> writes: Mats> Definitely relative! I don't feel strongly, but the other converters (midi2ly, abc2ly, etf2ly...) all use absolute pitches. And using relative definitely makes it necessary to be careful about taking an exerpt out of context, w

Re: [patch] first-clef property

> "Nicolas" == Nicolas Sceaux <[EMAIL PROTECTED]> writes: Nicolas> I have worked today on a draft, simple incipit engraver, with clef, Nicolas> key signature and time signature. Might someone comment on it? The incipits I use also have the first note. -- Laura (mailto:[EMAIL PROTE

Re: 2.11 lilypond-book and headers

> "Mats" == Mats Bengtsson <[EMAIL PROTECTED]> writes: Mats> Laura, you must have confused things. Probably, but I'm not imagining that my book suddenly had fewer headers in it when I tried 2.11 to see if it would fix another problem. Mats> As long as each .ly file only contains a s

Re: 2.11 lilypond-book and headers

>>>>> "Graham" == Graham Percival <[EMAIL PROTECTED]> writes: Graham> Laura Conrad wrote: >> In 2.11, if a \lilypondfile{filename} isn't the first one on the page, >> no headers are printed. >> >> Is there a way

2.11 lilypond-book and headers

I'm sure I've seen this discussed before, but I can't remember the conclusion, and a quick google didn't turn up the discussion. I'm trying 2.11 on a document with a large number of fairly small files, which typically print two or three to a page. In 2.10 and earlier (back to 2.4 or so; 2.0 didn

Re: Lilypond font design

>>>>> "Till" == Till Rettig <[EMAIL PROTECTED]> writes: Till> Couldn't they be converted to otf and then used easyly via the system Till> installation for fonts or then included into lily as a Till> choice. Actually how did Laura Conrad

Re: LilyPond 2.9.28 released

= RCS file: /sources/lilypond/lilypond/ChangeLog,v retrieving revision 1.5544 diff -u -r1.5544 ChangeLog --- ChangeLog 3 Nov 2006 15:59:51 - 1.5544 +++ ChangeLog 3 Nov 2006 16:06:57 - @@ -1,3 +1,8 @@ +2006-11-03 Laura Conrad <[EMAIL PROTECTED]

Re: Another patch (this one is important) to abc2ly

> "Juergen" == Juergen Reuter <[EMAIL PROTECTED]> writes: >> except I find it harder to read. What do you think is the >> advantage of yours over mine? >> Juergen> Your approach >> a = re.sub ( '-', '- ', a)# split words with - Juergen> applies a rule which

Re: Another patch (this one is important) to abc2ly

> "Juergen" == Juergen Reuter <[EMAIL PROTECTED]> writes: >> a = re.sub ( '-', '- ', a)# split words with - >> +a = re.sub ( ' - - ', ' -- ', a) # unless was originally " -- " Juergen> Just being curious: Juergen> Maybe I am totally wrong (since I do not know the

Another patch (this one is important) to abc2ly

/ChangeLog,v retrieving revision 1.5342 diff -u -r1.5342 ChangeLog --- ChangeLog 30 Sep 2006 12:35:37 - 1.5342 +++ ChangeLog 30 Sep 2006 14:46:57 - @@ -1,3 +1,17 @@ +2006-09-30 Laura Conrad <[EMAIL PROTECTED]> + + * Fix abc2ly translation of Q: so that it uses new tempo

another abc2ly patch

: /sources/lilypond/lilypond/ChangeLog,v retrieving revision 1.5342 diff -u -r1.5342 ChangeLog --- ChangeLog 30 Sep 2006 12:35:37 - 1.5342 +++ ChangeLog 30 Sep 2006 13:41:26 - @@ -1,3 +1,12 @@ +2006-09-30 Laura Conrad <[EMAIL PROTECTED]> + + * abc2ly.py adds segno (S)

abc2ly patch

e: /sources/lilypond/lilypond/ChangeLog,v retrieving revision 1.5335 diff -u -r1.5335 ChangeLog --- ChangeLog 28 Sep 2006 22:40:05 - 1.5335 +++ ChangeLog 29 Sep 2006 15:23:10 - @@ -1,3 +1,8 @@ +2006-09-29 Laura Conrad <[EMAIL PROTECTED]> + + * abc2ly.py fix so that ente

Re: Problem with partial

> "Juergen" == Juergen Reuter <[EMAIL PROTECTED]> writes: Juergen> I am not sure, if line breaks by default should be Juergen> allowed only on true bar lines or also on pseudo bar Juergen> lines. In general, a repeat sign is one of the better places for a page break. -- Laura (m

Re: Is GUB consistent across platforms?

> "JN" == Jan Nieuwenhuizen <[EMAIL PROTECTED]> writes: JN> On Linux there is nothing, I'm not sure if we still support JN> emacs/point-and-click. Sort of. There is documentation in an appendix about how to do it, but to have point-and-click go to the right column as well as the li

Re: Style

> "MB" == Mats Bengtsson <[EMAIL PROTECTED]> writes: MB> It's up to you as a user to do this. Just write a .ly file with all MB> your favourite style changes and use MB> \include "mystyle.ly" MB> in your scores. MB> The thing is that it is possible to separate layout from

lilypond-book and included files

Lilypond-book doesn't seem to understand the include structure very well. That is, it's using the included files, but doesn't seem to know that it needs to rebuild the snippets if you change an included file. I'm working around this by removing all the snippets when I change anything, but obviou

Re: lily crashes

>>>>> "LC" == Laura Conrad <[EMAIL PROTECTED]> writes: LC> The attached file crashes lilypond 2.8 installed from the GUB on a LC> Debian Sid system. Commenting out the ambitus engraver causes the crash to go away. -- Laura (mailto:[EMAIL PROTECT

lily crashes

The attached file crashes lilypond 2.8 installed from the GUB on a Debian Sid system. bill-afr.ly Description: Binary data -- Laura (mailto:[EMAIL PROTECTED] , http://www.laymusic.org/ ) (617) 661-8097 fax: (501) 641-5011 233 Broadway, Cambridge, MA 02139

Re: \version statement

> "ES" == Erik Sandberg <[EMAIL PROTECTED]> writes: ES> By the way: Is there any particular reason why lily no longer ES> wants to compile files older than .38? Most 2.4 files do still ES> work with .39, and I fail to see why the recent convert-ly ES> rules would have any speci

\version statement

abc2ly puts a version statement into its output files: \version "2.5.20" By design this trails the lilypond version, and is changed only when abc2ly has been thoroughly tested with the current version. However, when you run a file with an obsolete version through 2.7.39, you get the foll

Re: Landscape mode broken in 2.7.38

> "JS" == Johannes Schindelin <[EMAIL PROTECTED]> writes: JS> A quick workaround for you could be to edit framework-ps.scm JS> and exchange the corresponding arguments. (This is just a JS> hack...) Thanks. I'm actually using the even quicker workaround of printing the piece in por

Landscape mode broken in 2.7.38

When I include the line: #(set-default-paper-size "letter" 'landscape) I expect the postscript file to come out with the long side of the rectangle horizontal. In 2.7.36, this worked. In 2.7.38, when I look at the page in gv, I see a page with the title starting about half way down the paper,

Re: LilyPond 2.7.38 released, final release candidate

> "WL" == Werner LEMBERG <[EMAIL PROTECTED]> writes: >> The pdf file size is still almost 8 times the size of the postscript >> file size. (which I reported a couple of weeks ago). I don't think >> anyone who distributes her work via pdf is going to consider this an >> upgrad

Re: LilyPond 2.7.38 released, final release candidate

> "HN" == Han-Wen Nienhuys <[EMAIL PROTECTED]> writes: HN> I've just finished lilypond 2.7.38. This is likely to be the last HN> release candidate before we release 2.8, so report any bugs that you HN> might find. The pdf file size is still almost 8 times the size of the postscrip

Re: LilyPond 2.7.38 released, final release candidate

>>>>> "HN" == Han-Wen Nienhuys <[EMAIL PROTECTED]> writes: HN> Laura Conrad wrote: >>>>>>> "HN" == Han-Wen Nienhuys <[EMAIL PROTECTED]> writes: HN> I've just finished lilypond 2.7.38. This is likely to be

Re: printallheaders does it twice

>>>>> "LC" == Laura Conrad <[EMAIL PROTECTED]> writes: LC> The attached file in 2.6 appropriately prints all the headers exactly LC> once for each \score block. I take it back; 2.6 doesn't seem to print the headers on the subsequent scores at al

printallheaders does it twice

The attached file in 2.6 appropriately prints all the headers exactly once for each \score block. In 2.7.37 (yesterday morning's cvs), it prints all the headers twice for the first score. score-eminor.ly Description: Binary data -- Laura (mailto:[EMAIL PROTECTED] , http://www.laymusic.org/ )

The music in parallel web display has to be wrong

I can't imagine needing a feature that would produce music looking like the current (Monday, March 6) display of: -- Laura (mailto:[EMAIL PROTECTED] , htt

[Laura Conrad] abc2ly -b writes bad lilypond for '>' construct

I just checked this problem in lilypond 2.7.35, and it is still trying to beam the dotted quarter note and the eighth note together. However, the output is more acceptable, as the eighth note has what looks like half a beam attached to it, instead of looking like a quarter note, as it does in 2.6

Re: bad images in NEWS.html

> "WL" == Werner LEMBERG <[EMAIL PROTECTED]> writes: >> The first thing I see in NEWS.html are bad images: WL> To be more specific, I mean this file: WL> http://lilypond.org/doc/v2.7/Documentation/topdocs/NEWS.html Actually, the first thing I saw was the "word-processor-o":

Re: Lily 2.7.22

> "DJ" == Daniel Johnson <[EMAIL PROTECTED]> writes: DJ> Unfortunately this has been an issue since at least 2.7.16 when using DJ> gcc 3.3 (it works fine in 3.4). There is a suggested solution here: DJ> http://www.mail-archive.com/lilypond-devel@gnu.org/msg08427.html I tried inst

Re: Lily 2.7.22

> "HN" == Han-Wen Nienhuys <[EMAIL PROTECTED]> writes: HN> 2.7.22 is out. When I try to build it on my Debian unstable system, I get: rm -f ./out/font-config-scheme.dep; DEPENDENCIES_OUTPUT="./out/font-config-scheme.dep ./out/font-config-scheme.o" g++ -c -DHAVE_CONFIG_H -DNDEBUG -

Re: [bug] spacing-spanner properties

> "JR" == Juergen Reuter <[EMAIL PROTECTED]> writes: JR> Mmmh, ok, line-breaking is the real issue (although I do not JR> understand what prevents lily to insert additional line breaks JR> in the last two lines). Considering this, then maybe some of JR> the spacing problems in

lilyond-book 2.7.8 crashes

Attached is a pretty minimal .lytex file, which causes the following to happen: [EMAIL PROTECTED]:~/music/dowland/mates$ lilypond-book test.lytex lilypond-book-bin-2.7.8 (GNU LilyPond) 2.7.8 Reading test.lytex... Traceback (most recent call last): File "/home/newlily/.local/bin/lilypond-book-bi

Re: 2.6.3 crashes

>>>>> "JN" == Jan Nieuwenhuizen <[EMAIL PROTECTED]> writes: JN> Laura Conrad writes: >> Is there anyone with a working 2.6.3 on Debian unstable? And if so, >> how did you get it? JN> I've built a new autopackage for 2.6.3 u

Re: 2.6.3 crashes

> "ES" == Erik Sandberg <[EMAIL PROTECTED]> writes: ES> I have no clue.. which guile version are you using? [EMAIL PROTECTED]:~/music/isaac/innsbruck2$ guile --version Guile 1.6.4 Copyright (c) 1995, 1996, 1997, 2000, 2001, 2002, 2003 Free Software Foundation Guile may be distributed unde

Re: 2.6.3 crashes

> "ES" == Erik Sandberg <[EMAIL PROTECTED]> writes: >> I've done the autopackage part; what kind of shuffling would you >> recommend? ES> ~/.local/bin/ could be moved to the front. I had to do that to run the package version at all. ES> Also, you could do lilypond --verbose

Re: Sponsoring lilypond development Was Re: Score parts: instrument and duration

> "ES" == Erik Sandberg <[EMAIL PROTECTED]> writes: ES> A fairly unrelated question is: Why are so many preferring ES> PMX/MusiXTeX to Lily? I often have better chances finding good ES> MusiXTeX scores on Werner Icking archive, than finding them on ES> mutopia. Not to discoura

Re: Resource list entry?

> "F" == Fairchild <[EMAIL PROTECTED]> writes: F> Comparison of music typesetting programs F> The newsgroup rec.music.theory has a thread about comparing seven commercial F> and one free (LilyPond) music typesetting programs. See Laura Conrad's F> weblog http://www.laymusic

Re: 2.6.3 crashes

> "ES" == Erik Sandberg <[EMAIL PROTECTED]> writes: LC> Attached is the log from running "lilypond twinkle-pop.ly". This >> is LC> on a Debian Sid system. Autopackage is installed as a user, but >> I've LC> gotten the same error running the cvs 2.6.3. It seems to happen >> o

Re: 2.6.3 crashes

>>>>> "LC" == Laura Conrad <[EMAIL PROTECTED]> writes: LC> I was getting this error when building from CVS, but I have now LC> installed the autopackage and am getting the same error. LC> Attached is the log from running "lilypond twin

2.6.3 crashes

I was getting this error when building from CVS, but I have now installed the autopackage and am getting the same error. Attached is the log from running "lilypond twinkle-pop.ly". This is on a Debian Sid system. Autopackage is installed as a user, but I've gotten the same error running the c

Re: Problem building lilypond 2.6, this morning's cvs

> "HN" == Han-Wen Nienhuys <[EMAIL PROTECTED]> writes: HN> thanks, fixed. Now I get a new error, log attached. make.log Description: Binary data -- Laura (mailto:[EMAIL PROTECTED] , http://www.laymusic.org/ ) (617) 661-8097 fax: (501) 641-5011 233 Broadway, Cambridge, MA 02139 _

Problem building lilypond 2.6, this morning's cvs

Log file attached. make.log Description: Binary data -- Laura (mailto:[EMAIL PROTECTED] , http://www.laymusic.org/ ) (617) 661-8097 fax: (501) 641-5011 233 Broadway, Cambridge, MA 02139 ___ lilypond-devel mailing list lilypond-devel@gnu.org http:

Re: abc2ly patch

>>>>> "HN" == Han-Wen Nienhuys <[EMAIL PROTECTED]> writes: HN> Laura Conrad wrote: >> The attached patch fixes a fairly serious usability problem with >> abc2ly. The abc syntax doesn't allow the specification of the scope >

abc2ly patch

2ly output before it would compile. This patch assumes that it ends at a new repeat or a double bar line. I've also added support for the "segno" decoration, which I think I sent before but it seems to have gotten dropped. 2005-07-06 Laura Conrad <[EMAIL PROTECTED]

Re: lilypond-book problem remains in 2.6.1

> "GP" == Graham Percival <[EMAIL PROTECTED]> writes: GP> On 11-Jul-05, at 4:05 PM, Nicholas Haggin wrote: >> The output issues I posted about earlier (to lilypond-user only) >> remain under 2.6.1, although the other bugs I ran into are now fixed. >> >> http://nhaggin.free

2.6.0 (or 2.6.1) cvs?

Just "cvs up" on the cvs repository I was using to test 2.5.x gives me a 2.7.0 version of lilypond. What I'd really like is to stay on 2.6.0 and get my environment stable there. Is there a CVS tag for doing that? I did look at the download and development instructions on the website, which say

Re: What's the point of \book{...} ?

> "HN" == Han-Wen Nienhuys <[EMAIL PROTECTED]> writes: >> Since only the I) files are used when you run lilypond-book on a >> LaTeX >> file, Graham's concerns are completely valid, namely that the height of >> each lily-xxx-n.eps file is taken from the default settings in >

Re: Help wanted : announcement posting?

>>>>> "LC" == Laura Conrad <[EMAIL PROTECTED]> writes: HN> abcusers@argyll.wisemagic.com LC> Done. Except that I should have pointed out that the current address is <[EMAIL PROTECTED]>. -- Laura (mailto:[EMAIL PROTECTED] , http://www.laymusic

Re: Help wanted : announcement posting?

> "HN" == Han-Wen Nienhuys <[EMAIL PROTECTED]> writes: HN>abcusers@argyll.wisemagic.com Done. -- Laura (mailto:[EMAIL PROTECTED] , http://www.laymusic.org/ ) (617) 661-8097 fax: (501) 641-5011 233 Broadway, Cambridge, MA 02139 ___

Re: [Laura Conrad] Lilypond-book problem

> "GP" == Graham Percival <[EMAIL PROTECTED]> writes: GP> Currently there are a few problems with margins and GP> lilypond-book (I think that's what causes this problem -- the GP> first line is slightly less than the textwidth, so LaTeX GP> places another staff line next to the

Re: [Laura Conrad] Lilypond-book problem

> "MB" == Mats Bengtsson <[EMAIL PROTECTED]> writes: MB> The problem with your example is that you use MB> #(set-default-paper-size "letter") within the included .ly MB> file. lilypond-book will automatically detect the page layout MB> used in the rest of the LaTeX document and

[Laura Conrad] Lilypond-book problem

I reported this problem on June 3. It still exists on 2.5.30. I got my lilypond-book problem down to a reasonable test file not using wierd packages. There are two systems, and they're being placed side by side rather than one above the other

Re: Lilypond-book problem

> "GD" == Georg Dummer <[EMAIL PROTECTED]> writes: GD> I answer you directly because I'm not subscribed to the GD> lilypond.devel. Thanks. It's better to copy the list, because then the developers get the benefit of your insights too. GD> I had the same problem and I played ar

Lilypond-book problem

I got my lilypond-book problem down to a reasonable test file not using wierd packages. There are two systems, and they're being placed side by side rather than one above the other. test.lytex Description: Binary data prelude.ly Description: Binary data -- Laura (mailto:[EMAIL PROTECTED] ,

Bad link in documentation

I was looking at , and clicked on the link "Lyrics" on the first non-header line,

Re: lilypond-book problem

> "MB" == Mats Bengtsson <[EMAIL PROTECTED]> writes: MB> It seems that you use the suffix .tex for your LaTeX file with embedded MB> LilyPond commands. I don't, but the example in input/tutorial/lbook-latex-test.tex does. That was why I couldn't test whether it was my .lytex file or

abc2ly fix for multipart ABC

ndex: ChangeLog === RCS file: /cvsroot/lilypond/lilypond/ChangeLog,v retrieving revision 1.3675 diff -p -u -u -r1.3675 ChangeLog --- ChangeLog 29 May 2005 10:01:31 - 1.3675 +++ ChangeLog 29 May 2005 20:23:16 - @@ -1,3 +1,6 @@ +2005-05-29 Laura Conrad &l

Crashed lilypond, this morning's CVS

The lilypond file is attached. The error message is: + lilypond --ps francecourant-score.ly GNU LilyPond 2.5.27 Processing `francecourant-score.ly' Parsing... Interpreting music... francecourant-score.ly:37:61: warning: stem doesn't fit in beam c''!4f''4\bar "|" f''8[e''8f''8

lilypond-book problem

I have a .lytex file that worked on 2.5.21, and it's producing wierd output on this morning's CVS. I worked out the --psfonts problem, but now the music isn't being placed correctly on a page. I attempted to run lilypond-book on lbook-latex-test.tex, but was unsuccessful at figuring out the co

Re: LilyPond 2.5.26 released. Now with installers!

> "HN" == Han-Wen Nienhuys <[EMAIL PROTECTED]> writes: HN> I'm uploading 2.5.26. This release has a couple of small bugfixes. HN> LilyPond 2.6.0 will be out Real Soon Now, so check if there are any HN> critical problems left in this release. Well, has anyone build a Debian Package

Re: native LilyPond port for Microsoft Windows

> "JN" == Jan Nieuwenhuizen <[EMAIL PROTECTED]> writes: JN> We are pondering on ways to push/promote these installers to new JN> groups of users. Maybe others have good ideas? I forwarded the two announcements to the abcusers list. I think there are a lot of people there who would l

Re: latex in \markup

> "MB" == Mats Bengtsson <[EMAIL PROTECTED]> writes: MB> You just have to find out how to input that particular symbol MB> with your keyboard and your text editor. On my Linux box, I can MB> press Alt Gr and C to get a ©. I've found using the emacs latex input mode to be easier th

Re: .22 is out

> "HN" == Han-Wen Nienhuys <[EMAIL PROTECTED]> writes: HN> LilyPond version 2.5.22 is out. The crash problem I reported that was introduced between 2.5.20 and 2.5.21 has gone away, thanks. There's a new build problem; log attached. make.log Description: Binary data -- Laura (mailt

make uninstall?

It seems to have disappeared in current cvs. I'm sure I ran it only a few days ago. Is this on purpose or by accident? If it's on purpose, what are we supposed to do instead? [EMAIL PROTECTED]:/home/lconrad/src/lilypond/cvs/lilypond# make help Makefile for LilyPond 2.5.21 Usage: make [VARIABL

2.5.21 problems

04-26 Laura Conrad <[EMAIL PROTECTED]> + *abc2ly fix + 2005-04-26 Graham Percival <[EMAIL PROTECTED]> * Documentation/user/basic-notation.itely, Index: debian/changelog === RCS file: /cvsroot/lilypon

Re: lilypond ./ChangeLog scripts/abc2ly.py

> "ES" == Erik Sandberg <[EMAIL PROTECTED]> writes: ES> On Thursday 21 April 2005 08.28, Jan Nieuwenhuizen wrote: >> Erik Sandberg writes: >> >scripts/abc2ly.py: Bugfix >> >> Thanks, should this be in 2.4 too? ES> Ah, yes of course. It was introduced somewhere

fixes for abc2ly

RCS file: /cvsroot/lilypond/lilypond/ChangeLog,v retrieving revision 1.3492 diff -p -u -u -r1.3492 ChangeLog --- ChangeLog 21 Apr 2005 18:45:04 - 1.3492 +++ ChangeLog 22 Apr 2005 13:37:16 - @@ -1,3 +1,13 @@ +2005-04-22 Laura Conrad <[EMAIL PROTECTED]> + +

UTF-8 in python

Do we, or can we, have UTF-8 encodings in python? I'll describe what I'm doing below. The issue isn't whether I can do it on my system, which I can, but whether CVS and the rest of our build environment will preserve it if I submit a patch with a utf-8 encoded character in a python string. I had

Re: Upgrading

>>>>> "LC" == Laura Conrad <[EMAIL PROTECTED]> writes: ES> Attached is a patch that fixes the key signature problem. LC> Thanks. It works. Except that there's a piece of the patch to make chords work that doesn't seem to have ma

Re: Upgrading

> "ES" == Erik Sandberg <[EMAIL PROTECTED]> writes: ES> Attached is a patch that fixes the key signature problem. Thanks. It works. -- Laura (mailto:[EMAIL PROTECTED] , http://www.laymusic.org/ ) (617) 661-8097 fax: (501) 641-5011 233 Broadway, Cambridge, MA 02139 ___

Re: make install error

>>>>> "HN" == Han-Wen Nienhuys <[EMAIL PROTECTED]> writes: HN> Op ma, 18-04-2005 te 10:00 -0400, schreef Laura Conrad: >> install-info --info-dir=/usr/share/info ./out/lilypond.info >> install-info(./out/lilypond.info): Invalid info entry

abc2ly no longer translates second T: line correctly

Former versions of abc2ly appended a second title line to the title header line, with "", which used to translate to a line break, between the lines. This no longer seems to work (current cvs). I haven't figured how you get a line break in the title these days; if someone tells me, I could

Re: abc2ly problem with lilypond-snapshot

>>>>> "LC" == Laura Conrad <[EMAIL PROTECTED]> writes: LC> This ABC file that I reported problems with on 2.4.2 also has problems LC> on current (2005-04-16 Han-Wen Nienhuys) CVS. This one was a user error. Sorry. -- Laura (mailto:[EMAIL PROTECT

Debuild error

This is in current (ChangeLog 2005-04-16 Han-Wen Nienhuys <[EMAIL PROTECTED]>) CVS, on Debian unstable, with gs 8.14. The command was "debuild -B". debuild.log Description: Binary data ___ lilypond-devel mailing list lilypond-devel@gnu.org http://li

make install error

Current (2005-04-16 Han-Wen Nienhuys) CVS, make ran without errors, but "make install" produces the following: install.log Description: Binary data ___ lilypond-devel mailing list lilypond-devel@gnu.org http://lists.gnu.org/mailman/listinfo/lilypond-

Programming errors when processing abc2ly output

For the attached file, when I run abc2ly, and then lilypond, I get a lot of errors that say: programming error: Infinity or NaN encountered The lilypond output is as you would expect. cantus.abc Description: Binary data -- Laura (mailto:[EMAIL PROTECTED] , http://www.laymusic.org/ ) (617) 6

abc2ly problem with lilypond-snapshot

This ABC file that I reported problems with on 2.4.2 also has problems on current (2005-04-16 Han-Wen Nienhuys) CVS. The abc file is attached. It looks like there's something wrong with markup on multi-voice music. Abc2ly-snapshot says: [solo5]# abc2ly-snapshot test.abc /usr/bin/abc2ly-snapsh

Re: abc2ly key translation problem in current cvs

This problem report on 2.4.2 is still a problem in current CVS. >>>>> "LC" == Laura Conrad <[EMAIL PROTECTED]> writes: LC> The attached abc file is in G minor, so it should print with a key LC> signature of two flats. When I use Pedro's abc2

  1   2   3   >