Hi!
I just realized that debugging symbols have not been published along
with the (stripped) release binaries for 17.01.0.
This is bad because this is needed to understand e.g. the call trace
dumped along with a kernel oops.
OpenWrt 15.05.1 got that while LEDE 17.01.0 doesn't :(
http://downloads.
Hi everyone,
most of you might know me for hacking on embedded stuff while having
the common good in mind. Because I'm practically always out of money,
I decided to setup a patreon account which can help me to gather at
least the $$$ needed to pay for obligatory health insurance and such
things. I
Hi!
On Sun, Mar 19, 2017 at 12:46:37PM +0100, Daniel Golle wrote:
> Hi!
>
> I just realized that debugging symbols have not been published along
> with the (stripped) release binaries for 17.01.0.
> This is bad because this is needed to understand e.g. the call trace
> d
Hi Pau,
On Tue, Mar 28, 2017 at 09:28:22PM +0200, Pau wrote:
> Hi.
>
> I am using the SDK and IB from LEDE 17.01.0 release (mips_24kc). I've
> been using it successfully the last days until now. I did not change
> anything but I get the error:
>
> * opkg_install_pkg: Package luci-lib-nixio sha25
On Tue, Mar 28, 2017 at 10:55:09PM +0200, Pau wrote:
> Hi Daniel, thanks for your reply. Find my comments in-line.
>
> On 28/03/17 22:37, Daniel Golle wrote:
> > Hi Pau,
> >
> > On Tue, Mar 28, 2017 at 09:28:22PM +0200, Pau wrote:
> >> Hi.
> >>
>
On Tue, Mar 28, 2017 at 11:22:42PM +, Alberto Bursi wrote:
> On 03/29/2017 12:19 AM, Gui Iribarren via Lede-dev wrote:
> > all we want to do is create a firmware based on a specific LEDE release,
> > and not fear that if we want to rebuild the exact same firmware in two
> > months (or days!), w
Hi James,
On Tue, Mar 28, 2017 at 04:58:54PM -0600, James Feeney wrote:
> I am motivated to rant again on this topic. Repeating what I said last
> November, before the new release process was finalized, in response to
> David Lang:
>
> ---
>
> >> There is an interesting question of how to refer
On Wed, Mar 29, 2017 at 05:28:07AM +0200, Pau wrote:
> On 29/03/17 02:45, Daniel Golle wrote:
> > On Tue, Mar 28, 2017 at 10:55:09PM +0200, Pau wrote:
> >> Hi Daniel, thanks for your reply. Find my comments in-line.
> >>
> >> On 28/03/17 22:37, Daniel Golle wro
Hi Paul,
On Fri, Mar 31, 2017 at 10:38:39PM +0200, Paul Oranje wrote:
> This POE access point suited for outside usage needs an external antenna.
> According FCC documentation the ENH200EXT (needs external antenna) and the
> ENH200 (with internal antenna) are electrically equal to the Allnet ALL0
eat
to do and have on this planet, create a future which I'd want to live
in and so on... So please tell me more :)
Cheers
Daniel
>
> Cheers
>
> Benni
>
> Am 22.03.2017 um 11:22 schrieb Daniel Golle:
> > Hi everyone,
> >
> > most of you might know m
Hi!
Please add add Signed-off-by: line and your real name, then I can
apply the patch for you. Please also see the (cosmetic) coments below.
On Thu, Apr 20, 2017 at 12:10:24AM +0300, Knall Kopf wrote:
> Hello,
> can everybody update the feed/telephony.git to the newest Asterisk and Libpri
> liba
Hi Paul,
I've merged your patch, however, it looks like the buildbot process
still doesn't generate the desired image (despite our tests and success
we've seen earlier). This is because the ubnt-erx-factory-image build
artifact cannot work in the ImageBuilder and I've converted it into
a nicer and
backport the commit changing the default packages from master
and skip the boards which are not preset in lede-17.01 (which obviously
makes future backporting of the commits adding those boards harder)?
Cheers
Daniel
On Thu, May 04, 2017 at 05:35:59AM +0200, Daniel Golle wrote:
> Hi Paul,
>
On Mon, May 08, 2017 at 09:19:42PM +0200, Zoltan HERPAI wrote:
> Hi,
>
> On Mon, 8 May 2017, Daniel Engberg wrote:
>
> > Trac:
> > Is it really worth keeping trac at all? What value does it add? Just
> > display a page explaining that it's shutdown and forward to OpenWrt?
>
> There is a lot of "
Hi Edwin,
On Fri, May 12, 2017 at 10:02:36AM +0200, Edwin van Drunen wrote:
> As a long time user of OpenWRT and recent “LEDE convert” I would also like to
> chime in on the naming and branding of the post-merge project.
>
> My employer and several of my industrial clients have used OpenWRT/LEDE
On Fri, May 12, 2017 at 05:51:18PM -0500, L. D. Pinney wrote:
> On Fri, May 12, 2017 at 5:29 PM, Mathias Kresin wrote:
> > 12.05.2017 03:37, kyson lok:
> >>
> >> On Fri, May 12, 2017 at 6:18 AM, L. D. Pinney wrote:
>
> +&spi0 {
> + status = "okay";
> +
> + m25
Hi Val,
On Sat, May 13, 2017 at 06:23:29PM -0400, Val Kulkov wrote:
> Is there any convention on the use of uid and gid when creating new
> users or groups? Can someone point me to it, if it exists?
>
> I noticed that two packages, icecast and postfix, compete for the same uid=87:
>
> icecast's
On Mon, May 15, 2017 at 10:59:55PM +0800, Yousong Zhou wrote:
> On 15 May 2017 at 22:41, Val Kulkov wrote:
> > The auto-allocation of uid/gid emulates useradd/groupadd, picking the
> > first unused uid/gid starting from 100. This works quite well on its
> > own, but there are about three dozen pac
Init scripts are already being enabled in default_postinst.
Signed-off-by: Daniel Golle
---
include/rootfs.mk | 4
1 file changed, 4 deletions(-)
diff --git a/include/rootfs.mk b/include/rootfs.mk
index 74785cbbd3..6167306f0c 100644
--- a/include/rootfs.mk
+++ b/include/rootfs.mk
Hi Rafal,
On Sun, May 21, 2017 at 05:02:44PM +0200, Rafał Miłecki wrote:
> Hi,
>
> I noticed commit 0dcc36fc7ddec ("kernel: add hwmon for W83627EHF and
> family") in the LEDE tree that doesn't look OK to me.
>
> 1) Package for hwmon-w83627ehf
> Do we need it to be a package? Or could it be built
Hi Jo,
On Wed, May 24, 2017 at 10:34:20PM +0200, Jo-Philipp Wich wrote:
> Hi,
>
> I'd like to start preparing the v17.01.2 release during the upcoming
> weekend with the goal to release final binaries within the next week
> (~May 29th till June 3rd).
>
> Changes that shall be part of 17.01.2 sho
On Mon, May 29, 2017 at 09:03:57AM +0200, John Crispin wrote:
> (resend, this time as plain text)
>
> Hi,
>
> here is a V3 of the remerge proposal, I tried to fold all the comments
> people made into it, if anything is missing let me know. Please remeber that
> post remerge anything can be voted
Hi!
I'm currently trying to get SPI with two devices connected to work on
MT7688 and noticed that the spi-mt7621 driver got a pretty weird
work-around going on: if CS# is set it does only half-duplex transfers
which if CS# is not set it does full-duplex. John has then disabled
full-duplex alltoget
On Sat, Jun 10, 2017 at 02:53:53PM +0200, Gerhard Bertelsmann wrote:
> Hi,
>
> the Banana Pi has a USB OTG capable port. This seems to be not enabled
> or choosable with 'make menuconfig'. I had a quick look in the
> makefiles but didn't find the central place where USB_GADGET_SUPPORT
> is enabled
Hi!
I use EPSolar Tracer MPPT controllers here, the older RN series got a
3.3V-level TTL serial port for which I've written a small tool which
allows easy integration with collectd:
https://github.com/dangowrt/tracertools/
(package can be found on github.com/openwrt/packages as well)
The slightl
I noticed that the Linux built-in bridge now supports filtering by VLAN
tags. This can be much more efficient than using ebtables for the same
task, hence I wonder if there is any reason to keep this disabled or
if there is interest in enabling it (I'd evaluate the space
requirements on most space-
On Fri, Jun 16, 2017 at 10:30:14AM -, Karl Palsson wrote:
>
>
> I fairly strong feel that this change brings no value to the
> table.
I disagree. For now, the two allocation schemes (hardcoded vs.
dynamic) are competing for the same address space. This can
result in a hard-coded UID/GID to b
On Fri, Jun 16, 2017 at 12:15:19PM -, Karl Palsson wrote:
>
> Daniel Golle wrote:
> > On Fri, Jun 16, 2017 at 10:30:14AM -, Karl Palsson wrote:
> > >
> > >
> > > I fairly strong feel that this change brings no value to the
> > > table.
Not completely related, but it came to my mind a couple of days ago
and maybe you can share your opinion:
Shouldn't we also be setting CONFIG_LOCALVERSION if *not* using an
external kernel, to indicate that this is *not* a vanilla kernel.org
codebase but actually got tons of OpenWrt/LEDE patches on
Hi!
I've created a lede-17.01 branch for procd so fixes can be
cherry-picked from master onto that branch.
I suggest to pick the commits listed below:
453116e system: introduce new attribute board_name
e5b963a preinit: define _GNU_SOURCE
e5ff8ca upgraded: cmake: Find and include uloop.h
f367ec6 h
Hi Florian,
On Tue, Jun 20, 2017 at 09:00:30AM -0700, Florian Fainelli wrote:
> On 06/20/2017 08:58 AM, Jo-Philipp Wich wrote:
> > Hi,
> >
> > in principle I do not have any objections but I am not sure if we should
> > really backport the sysupgrade changes yet. Are we sure that thestaged
> >
On Tue, Jun 20, 2017 at 10:04:05AM -0700, Florian Fainelli wrote:
> On 06/20/2017 07:52 AM, Daniel Golle wrote:
> > Hi!
> >
> > I've created a lede-17.01 branch for procd so fixes can be
> > cherry-picked from master onto that branch.
>
> I suppose that work
, as PKG_BUILD_DEPENDS should actually really
reference source package names if you asked me.
However, to fix things for now, use libustream-mbedtls to fix
scripts/feeds and parallel builds which otherwise fail to build uhttpd.
Reported-by: Paul Spooren
Signed-off-by: Daniel Golle
---
package
adata.pm
and probably in more places.
I'm not familiar with Perl at all. Is there Anyone with more insight
into those scripts willing to have a look at the issue?
>
> ~ Jo
>
> > Am 22.06.2017 um 02:07 schrieb Daniel Golle :
> >
> > uhttpd refered to
Hi Erik,
have a look at video.mk which already packages some V4L2 modules.
Most likely you'll only have to add a couple of lines to package the
modules you need (supposedly dvb-core, some dvb-frontends and a USB
device).
Let me know if you need more help.
Cheers
Daniel
On Fri, Jun 23, 2017 at
There is nothing wrong there.
Kernel modules move location from time to time and we support different
kernel versions within the same build tree. Hence we got some logic to
easily express whether and where a module exists.
in this case
"@ge4.4" means "if kernel version is _g_reater than or _e_qual
Hi!
I'm about to push a lede-17.01 branch for fstools. These are the
changes I'd pick from the master branch:
f038a61 libfstools: fix matching device name
c43ae11 fstools: use -Wno-format-truncation instead of
-Wno-error=format-truncation
633a8d0 libfstools: fix multiple volume_identify usages w
On Wed, Jul 12, 2017 at 07:14:04AM -0400, W. Michael Petullo wrote:
> From bc848f9f3d0ffb9aa114c7faa3916f059f5616b2 Mon Sep 17 00:00:00 2001
> From: "W. Michael Petullo"
> Date: Wed, 12 Jul 2017 07:02:18 -0400
> Subject: [PATCH] block: support /dev/xvd* nodes
> To: LEDE Development List
>
> Xen
y
unexpected public interest in having a VIA EPIA sepecific sub-target,
I think it's safe to assume there isn't).
Acked-by: Daniel Golle
>
> Cc: Daniel Golle
> Signed-off-by: Baptiste Jonglez
> ---
> target/linux/x86/epia/config-4.4 | 213
> --
On Thu, May 11, 2017 at 08:56:50AM +0200, Sven Eckelmann wrote:
> From: Sven Eckelmann
>
> The wpa_supplicant code for IBSS allows to set the mcast rate. It is
> recommended to increase this value from 1 or 6 Mbit/s to something higher
> when using a mesh protocol on top which uses the multicast
Hi everyone!
On Sat, Feb 18, 2017 at 08:10:22AM +, Kevin Darbyshire-Bryant wrote:
> > On 18 Feb 2017, at 00:06, daniel wrote:
> >
> > And I also do not want opkg to invoke the init scripts of the just upgraded
> > packages until I have finished all my checks and stuff.
> >
> > I thought it
p-in 'full' versions.
Refresh existing patch while at it.
Signed-off-by: Daniel Golle
---
package/utils/busybox/patches/230-add_nslookup_lede.patch | 8
.../patches/500-move-traceroute-applets-to-bin.patch| 13 +
2 files changed, 13 insertions(+), 8 delet
d at /bin/login.
Signed-off-by: Daniel Golle
---
.../utils/busybox/patches/510-move-passwd-applet-to-bin.patch | 11 +++
1 file changed, 11 insertions(+)
create mode 100644
package/utils/busybox/patches/510-move-passwd-applet-to-bin.patch
diff --git a/package/utils/busybox/patches/
Hi Giuseppe,
On Sun, Jul 30, 2017 at 09:26:15PM +0200, Giuseppe Lippolis wrote:
> Dear community,
> I'm trying to port openwrt/lede on the dlink dwr921 (mt7620n arch).
>
> Currently I get a kernel panic after the OS fail to find the wmac eeprom
> location.
> At the moment I use in the dts somethi
Convert patches for RT3883 and RT3663 as well as support for
external PA on MT7620 to use the changed calling convention for
rt2.*_read(...) functions.
Signed-off-by: Daniel Golle
---
...rt2800lib-add-channel-configuration-function-.patch | 18 +-
...rt2800lib-add-RFCSR
Hi Karl,
On Thu, Aug 31, 2017 at 05:17:38PM +, Karl Palsson wrote:
> Instead of blindly enabling the odhcpd v6 server and RA server on the
> lan port, only do that if the lan port isn't set to DHCP.
>
> This prevents the unhelpful case of a device being a dhcpv4 client and
> v6 server on the
Hi Hauke,
On Thu, Sep 14, 2017 at 12:02:21AM +0200, Hauke Mehrtens wrote:
> On 08/25/2017 12:02 AM, Daniel Golle wrote:
> > Convert patches for RT3883 and RT3663 as well as support for
> > external PA on MT7620 to use the changed calling convention for
> > rt2.
On Fri, Sep 29, 2017 at 12:20:08PM +0200, Felix Fietkau wrote:
> On 2017-09-11 02:33, Philip Prindeville wrote:
> > Changing the subject from the previous thread as it turned out to not have
> > to do with sysupgrade at all.
> >
> > What I can tell is this, having added some tracing to fstools.
>
Hi Felix!
Hi everyone!
It looks like Tiziano is right and this patch did get lost somehow.
At least I can't find any work-arounds regarding PHY hangs committed in
neither target/linux/generic/files/* nor target/linux/ar71xx/files/*.
The thread on lede-dev also seems to have stagnated after
http:/
On Tue, Oct 24, 2017 at 03:07:04PM +0200, Jo-Philipp Wich wrote:
> Hi,
>
> comments inline.
>
> > Signed-off-by: Imre Kaloz
>
> Given the fact that we explicitely wanted to avoid @openwrt.org mails
> and that this was one of the discussion points leading to the split I
> find it delicate to sea
Hi Roman,
On Sun, Nov 26, 2017 at 12:02:14PM +0200, Roman Yeryomin wrote:
> Changes from v1:
> - use pointer to reduce compile size
>
> Signed-off-by: Roman Yeryomin
> ---
> sys.c | 5 +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/sys.c b/sys.c
> index 40f49ca..12219
Hi Moritz,
thanks for stepping forward and adressing this issue.
It'd be good to include the two assertions added to your list beelow.
On Tue, Nov 28, 2017 at 07:05:23PM +0100, Moritz Warning wrote:
> Hi,
>
> I noticed that there are some image file names that do not follow the
> "common" name
On Tue, Nov 28, 2017 at 08:16:33PM +0100, Moritz Warning wrote:
> Ok,
>
> looks like I should make a patch. :P
>
> On 11/28/2017 07:24 PM, Daniel Golle wrote:
> > Hi Moritz,
> >
> > thanks for stepping forward and adressing this issue.
> > It'd be
On Wed, Nov 29, 2017 at 09:33:39AM +0100, Mathias Kresin wrote:
> 28.11.2017 19:24, Daniel Golle:
> > Hi Moritz,
> >
> > thanks for stepping forward and adressing this issue.
> > It'd be good to include the two assertions added to your list beelow.
> >
On Wed, Dec 06, 2017 at 05:58:18PM +0100, Matthias Schiffer wrote:
> On 12/06/2017 12:40 AM, Roman Yeryomin wrote:
> > On 2017-12-05 21:52, Hans Dedecker wrote:
> >> On Tue, Dec 5, 2017 at 5:22 PM, Roman Yeryomin wrote:
> >>> It's better not to configure ifname separately since they
> >>> are tied
Hi Mathias,
On Fri, Dec 08, 2017 at 09:35:26AM +0100, Mathias Kresin wrote:
> udhcpc doesn't send a hostname by default. Use the system hostname if
> nothing else is specified, to always send a hostname.
>
> It syncs the behaviour to odhcpc, which always sends a hostname.
Could we somehow allow
Hi Dan,
On Mon, Dec 25, 2017 at 10:50:41AM -0700, dan wrote:
> Guys, new product from mikrotik. RBM33G. Has a MT7621A CPU w/ 16MB
> of flash, 256MB RAM, and pcie m.2.
>
> This thing has 2 mini pci2 slots and 3 gigabit ethernet port and looks
> nearly perfect for a dual radio, quad channel mesh
t
SAE keys which would fail the checks applied on the psk field (ie.
length and such).
Signed-off-by: Daniel Golle
---
package/network/services/hostapd/Makefile | 8 +-
package/network/services/hostapd/files/hostapd.sh | 6 +-
...-Avoid-key-reinstallation-in-FT-handshake.p
When sourcing /sys/class/block/*/uevent values have to be quoted as
they may contain spaces (e.g. in PARTNAME).
Fix this by pre-processing with sed before sourcing.
Signed-off-by: Daniel Golle
---
package/base-files/files/lib/upgrade/common.sh | 5 ++---
1 file changed, 2 insertions(+), 3
The Oolite V5.2 is a dual-radio system-on-a-module.
Specs:
- QCA9531 @ 550MHz with integrated 2T2R 802.11bgn
- 64 MB DDR2 RAM
- 16 MB SPI NOR Flash (W25Q128FV)
- 1+4x 10/100 Mbps Ethernet
- QCA9887 1T1R 802.11ac
Signed-off-by: Daniel Golle
---
.../linux/ar71xx/base-files/etc/board.d
Hi!
On Thu, Feb 15, 2018 at 08:51:23AM -0700, Philip Prindeville wrote:
> >
> > This is just about the default configuration, it's not a choice between
> > conflicting compile time options with varying security implications. While
> > key authentication may be best practice, allowing SSH passwo
d description of what symptoms
> > you're seeing.
> >
> > I did indeed clean up the AT8032 mess and solved it in the PHY driver
> > (controlled by platform data) instead of adding GPIO toggle hackery to
> > the Ethernet driver.
> >
> > - Felix
> >
d for other patches to apply which are not
worth being explicitely listed here.
Signed-off-by: Daniel Golle
---
Compile tested: ar71xx/generic, ramips/mt7621
Run tested: ramips/mt7621 (MT7603E+MT7612E)
package/network/services/hostapd/Makefile | 8 +-
package/network/services/hostapd/
Runs nice and stable since this post.
Should I just push it?
Tested on: ramips/mt7621, ar71xx/generic
On Thu, Mar 15, 2018 at 01:29:03AM +0100, Daniel Golle wrote:
> Update hostapd sources to current git snapshot to get rid of local
> patches and pave the road towards using WPA3 fe
Addresses CVE-2017-15873 and CVE-2017-15874.
Patch 600-cve-2017-16544.patch replaced by upstream fix.
Some smaller changes mostly related to the elimination of
getops's opt_complementary were needed for other patches.
Signed-off-by: Daniel Golle
---
package/utils/busybox/Mak
image... Otherwise the new -squashfs image will
> boot of a ram-overlay and won't keep the configurations after a reboot.
>
> Cc: Álvaro Fernández Rojas
> Cc: Paul Spooren
> Cc: Daniel Golle
> Signed-off-by: Christian Lamparter
Acked-by: Daniel Golle
And import patch to allow 802.11s mesh on DFS channels, see also
http://lists.infradead.org/pipermail/hostap/2018-April/038418.html
Signed-off-by: Daniel Golle
---
package/network/services/hostapd/Makefile | 6 +-
...1-mesh-factor-out-mesh-join-function.patch | 219
Hi!
I want to suggest a project to be (partially) funded by prpl's OpenWrt
project grant.
Abstract:
Implement a secure autotonomous IoT hub using OpenWrt/LEDE's ubus
service and the GNUnet P2P framework.
Introduction:
Despite the ongoing hype about the so-called Internet of Things, the
current p
b and devices to communicate.
Cheers
Daniel
>
> Hauke
>
> On 11/17/2016 12:39 PM, Daniel Golle wrote:
> > Hi!
> >
> > I want to suggest a project to be (partially) funded by prpl's OpenWrt
> > project grant.
> >
> > Abstract:
> > Impleme
Hi Felix,
On Thu, Dec 01, 2016 at 11:47:08AM +0100, Felix Fietkau wrote:
> On 2016-11-23 22:00, Florian Fainelli wrote:
> > http://downloads.openwrt.org/sources has a copy of the sources, but under
> > tar.bz2 file format, so utilize this one since the SVN server is down.
> >
> > This showed up w
as it includes sensors, events and actors
rather than just access to a configuration model.
Cheers
Daniel
>
> Regards,
> Sukru
>
> ____
> From: openwrt-devel [openwrt-devel-boun...@lists.openwrt.org] on behalf of
>
Hi Felix,
On Thu, Dec 01, 2016 at 04:12:38PM +0100, Felix Fietkau wrote:
> On 2016-12-01 16:05, Daniel Golle wrote:
> > Hi Sukru,
> >
> > On Tue, Nov 22, 2016 at 08:52:57PM +, Sukru Senli wrote:
> >> Hi Daniel,
> >>
> >> Regarding (Phase 2 - u
ioning. I'll have a deeper look at lininoIO so we can talk about
that in more detail soon.
Cheers
Daniel
>
> Best Regards
>
> Arturo
>
> 2016-12-01 16:51 GMT+01:00 Felix Fietkau :
>
> > On 2016-12-01 16:38, Daniel Golle wrote:
> > > Hi Felix,
>
Hi Felix,
On Thu, Dec 01, 2016 at 04:51:30PM +0100, Felix Fietkau wrote:
> On 2016-12-01 16:38, Daniel Golle wrote:
> > Hi Felix,
> >
> > On Thu, Dec 01, 2016 at 04:12:38PM +0100, Felix Fietkau wrote:
> >> On 2016-12-01 16:05, Daniel Golle wrote:
> >> >
Hi Hauke,
On Mon, Dec 05, 2016 at 01:54:20PM +0100, Hauke Mehrtens wrote:
> On 2016-12-05 11:57, Daniel Golle wrote:
> > Hi Felix,
> >
> > On Thu, Dec 01, 2016 at 04:51:30PM +0100, Felix Fietkau wrote:
> > > On 2016-12-01 16:38, Daniel Golle wrote:
> > >
Hi!
On Wed, Dec 21, 2016 at 08:13:00PM +0100, Jo-Philipp Wich wrote:
> ...
> # Open questions
>
> - Are there any outstanding changes?
>
> Is there important changes we should wait for before branching the
> release? Is there pending stuff in the staging trees which should
> absolutely go
Hi!
While testing the current snapshot builds I realized that for some
reason the additional default packages to be included for each board
aren't selected, ie. DEVICE_PACKAGES seems to be ignored in snapshot
builds.
Ie. eventhough kmod-rtc-ds1307 is set in DEVICE_PACKAGES for the akitio
board (ox
Hi!
I'd really like to see a rather trivial issue addressed:
dnsmasq fails to get notifications on /tmp/resolv.conf.auto changes
when running inside ujail. This is because the bind mount obviously
won't survive this file being *replaced*, eg. if the DHCP client
supplies the DNS server to be used o
[I had a typo in the lede-dev address in my first attempt to post this]
Hi!
The amount of patches on top of rt2x00 has grown into a huge pile
during the past couple of years. To get things into a shape that allow
discussing and merging them upstream, I created a tree on github based
on wireless-d
Just a thought:
Isn't there a way to simply have a hotplug handler which calls
/sbin/hwclock instead of forcing RTC modules to be built-in?
Cheers
Daniel
On Thu, Jan 12, 2017 at 07:05:00PM -0800, Rosen Penev wrote:
> I made a commit that added the RTC driver to the kernel config with
> the inten
Hi!
On Mon, Jan 16, 2017 at 11:08:57AM +0100, Stanislaw Gruszka wrote:
> On Mon, Jan 16, 2017 at 04:06:25AM +0100, Daniel Golle wrote:
> > From: Claudio Mignanti
> >
> > This is needed for devices without support for PCI MWI. See also
> > https://dev.openwrt.org/chan
Hi John,
On Tue, Jan 17, 2017 at 08:34:44AM +0100, John Crispin wrote:
> here is the original thread related to this patch
>
> http://rt2x00.serialmonkey.com/pipermail/users_rt2x00.serialmonkey.com/2012-November/012227.html
nah, that was me apparently trying to submit this upstream once before
a
closer to the expected
performance when using HT40 modes.
And also a lot of new added hardware support:
Gabor Juhos wrote code for Rt3883 WiSoC.
Daniel Golle implemented support for Rt3352 by designs with external PA
as well as for boards using a 20MHz crystal instead of the usual 40MHz.
Serge
Hi Kalle,
On Fri, Jan 13, 2017 at 12:46:56PM +0200, Kalle Valo wrote:
> Daniel Golle writes:
> > ...
> > Please review and comment, so we can get those patches merged!
>
> No pull requests, please. Instead send these as patches, easier to
> review and actually also easi
On Fri, Jan 13, 2017 at 04:59:59PM +0100, Johannes Berg wrote:
>
> > The advantage of pull requests is that author information can be
> > preserved more easily. Running git format-patch results in most
> > patches
> > having wrong SMTP sender information due to the assumption that the
> > patch au
On Fri, Jan 13, 2017 at 05:17:23PM +0100, Daniel Golle wrote:
> On Fri, Jan 13, 2017 at 04:59:59PM +0100, Johannes Berg wrote:
> >
> > > The advantage of pull requests is that author information can be
> > > preserved more easily. Running git format-patch re
Hi!
Please resend your patches with git format-patch or git send-email
instead of attaching them as files. This will make sure that people
actually get to see them and that they will get listed in our patchwork
instance [1]. When doing so, please include 'iwinfo' in the mails'
subject prefixes, ie
Hi Alexandru,
On Mon, Jan 30, 2017 at 02:53:43PM -0800, Alexandru Gagniuc wrote:
> This patch is designed to workaround an issue where an mt7620 will
> hang after a reboot. This happens because the bootrom gets confused
> when the SPI flash is left in 4-byte addressing mode. This change
> makes su
Hi!
Tested the release candidate on octeon/erlite, most things work nicely
so far.
Upgrading from 15.05 was tricky though because octeon_board_name
is broken in 15.05 and i needed to manually fix it so sysupgrade would
work (octeon_board_name() returned 'cavium,octeon-3860' instead of
'erlite' on
: Daniel Golle
---
include/kernel-version.mk | 4 ++--
.../patches-4.4/910-unaligned_access_hacks.patch | 4 ++--
.../0111-mm-Remove-the-PFN-busy-warning.patch | 2 +-
...R2PEER-to-set-MRSS-128-to-fix-CNS3xxx-BM-DMA..patch | 2 +-
.../cns3xxx/patches-4.4
Hi!
NETSHe offers a modified version of ath9k, mac80211 and cfg80211 which
offers support for TDMA, see:
http://netshe.ru/files/doc/en/TDMA_brief_en.pdf
Where to download the sourcecode of mac80211 and the modified drivers?
Cheers
Daniel
___
Lede-d
s in wireless stack.
> We provide our GPLed and dual licensed source codes to our customer only.
> Not our source code is available at http://gw.stasoft.net/dl/
>
> Can you tell me what is your real interest?
>
> Regards, Stas
>
>
> On 03.02.2017 03:43, Daniel Golle wrot
Hi Alberto,
On Fri, Feb 03, 2017 at 10:59:38AM +, Alberto Bursi wrote:
>
>
> On 02/03/2017 07:35 AM, Stanislav V. Korsakov wrote:
> > Hi Daniel,
> >
> > We provide our GPLed and dual licensed source codes to our customer only.
> > Not our source code is available at http://gw.stasoft.net/dl/
Hi Weedy,
On Fri, Feb 03, 2017 at 07:49:22PM -0500, Weedy wrote:
> On 1 February 2017 at 15:29, Jamie Stuart wrote:
> > Hello LEDE / OpenWRT devs,
> >
> > I am requesting your help. First a little background…
> ...
> > This a known issue with the chipset and seems to have been round for years.
>
Hi Juergen,
On Sat, Feb 04, 2017 at 08:32:36AM +0100, Juergen Kimmel wrote:
> Hello everyone,
> I'm in the same boat struggeling with mt7620a WiFi performance,
> namely with the device called ZBT APE522ii.
> Stock firmware based on Openwrt (has no version number) has no issues
> concerning wifi
mind (wireless community ISP in urban
areas) I'd rather have MiMo and more throughput as links are rather
short compared to what you are doing. Nevertheless, I'm impressed by
your report of 30km+ stable links!
Cheers
Daniel
>
> Regards, Stas
>
>
> On 03.02.2017 13:40
Hi Alberto,
On Sun, Feb 05, 2017 at 02:27:06PM +, Alberto Bursi wrote:
> On 02/04/2017 07:11 PM, Daniel Golle wrote:
> > As a response to the many issues and obvious code quality problems in
> > the patch adding support for MT7620 to rt2x00 I started a kickstarter
> &g
ll have to replace
"w" by "w" in the dts file belonging to that board (and send
a patch doing that!)
Signed-off-by: Daniel Golle
---
Having a closer look now I find it very confusing that a numerical
value is used on rt305x devices which the (supposedly) legacy string
Hi Dennis,
On Sat, Feb 18, 2017 at 06:32:53PM +0100, Dennis Schneck wrote:
> Hello,
> is there a Image for TP-Link TL-WA854RE ?
Due to the lack of an Ethernet port the device is currently very hard
to support properly. It's also known to have a very hard to access
UART, so it's easy to brick and
Hi Dennis,
Hi Alberto,
On Sat, Feb 18, 2017 at 07:02:54PM +, Alberto Bursi wrote:
> > Anyway, for proper support we'd need either:
> > * adding wireless interface being enabled as AP
> > * mimic WPS button functionality of stock firmware
> >
> There are some such wifi-only devices supported
1 - 100 of 172 matches
Mail list logo
