Hi,
Having some issues with sysupgrade on Archer C2600 (ipq806x with NOR flash).
(from the discussion at
https://forum.openwrt.org/viewtopic.php?pid=327671#p327671)
When doing sysupgrade without keeping config files, everything goes
ok. In that case at first boot I get
Sat Jun 18 09:50:48 2016 u
Ok. If the configuration I am suspecting for the stock firmware is
correct, then port 6 is unused and it shouldn't matter how it's
configured.
Actually it's possible that some of this is anyways dynamically
configurable through the switch registers. (ie even if the stock
firmware has the eth1 co
The switch is a full 7 port switch with 5 connected to the external
ports and 2 connected to the cpu. So there is no restriction on which
cpu port can connect to which combination of external ports.
___
Lede-dev mailing list
Lede-dev@lists.infradead.org
This is resolved by https://github.com/lede-project/source/pull/134
for the record.
___
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
Hi Adrian,
Thinking a bit more about the discussion we were having in
https://github.com/lede-project/source/pull/6 about the ethernet and
switch configuration on the ea8500.
Given that the stock firmware apparently doesn't enable VLAN on the
switch, I suspect that this router actually has a diffe
Further update in case anyone has any ideas.
The C2600 device on which I'm testing has two ethernet adapters with
their own dedicated connection to the switch, with the default config
such that eth0 is WAN and eth1 is LAN, configured with untagged vlans
on the switch.
I've tried two alternate con
This seems vaguely similar to
http://thread.gmane.org/gmane.comp.embedded.openwrt.devel/25030/focus=25031
Was there ever a resolution/understanding of that for brcm47xx?
___
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/m
Sorry for top-posting.
The second stack trace is this one in case the previous mail is too
hard to read:
Thu Jun 16 20:43:19 2016 kern.alert kernel: [ 3010.792756] Unable to handle
kernel paging request at virtual address aa24bb10
Thu Jun 16 20:43:19 2016 kern.alert kernel: [ 3010.792787] pgd = c
Ok,
Interestingly triggering a crash again, I get a somewhat different
stack trace. (attached)
On 15 June 2016 at 12:33, Josh Bendavid wrote:
> Hi,
> Testing with Tp-Link Archer C2600 (ipq806x) after latest changes (move
> to 4.4 kernel + restore dma ethernet corruption fix), I ha
Hi,
Testing with Tp-Link Archer C2600 (ipq806x) after latest changes (move
to 4.4 kernel + restore dma ethernet corruption fix), I have random
reboots on high wired network load.
Managed to get the kernel output during the crash below*. Note that I
also had similar crashes with 3.18 kernel, but d
Hi,
I've tested the current master on Tp-link Archer C2600 1.0 with kernel 4.4.
Few things that I've seen:
1) CPU frequency scaling seems not active
(/sys/bus/cpu/devices/cpu0/cpufreq/ does not exist and wired network
performance is significantly worse than with 3.18 kernel, limited by
high sirq
11 matches
Mail list logo
