Ok. If the configuration I am suspecting for the stock firmware is correct, then port 6 is unused and it shouldn't matter how it's configured.
Actually it's possible that some of this is anyways dynamically configurable through the switch registers. (ie even if the stock firmware has the eth1 connected directly to the WAN phy as I suspect, it might still be possible/preferable to configure the switch so that it is more like AP148 with gmacX (eth1) -> rgmii -> switch port 6 Actually I don't think gmac2 even supports rgmii, so if both ethernet interfaces are connected to the switch chip/PHY's with rgmii then they would have to be gmac0 and gmac1... _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
