On 17/05/18 13:47, Ram Chandra Jangir wrote:
Thanks Michael for confirming this,
Can you please help to update the kernel partition size to 4MB for R7800 and
send it as patch to community (lede-dev@lists.infradead.org)?
This will help to enable kernel v4.14 for all ipq806x based boards.
ha
Hi All,
In order to bring the OpenWrt mailing list back to operational status,
we are moving them to the infradead server. The 2 current LEDE lists
will be renamed
* lede-dev->openwrt-dev
* lede-adm -> openwrt-adm
the old names will get redirected to the new ones, so mails sent to
either o
-controller.patch
@@ -48,7 +48,7 @@ Signed-off-by: John Crispin
+obj-$(CONFIG_GPIO_MT7621)+= gpio-mt7621.o
--- /dev/null
+++ b/drivers/gpio/gpio-mt7621.c
-@@ -0,0 +1,354 @@
+@@ -0,0 +1,353 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the
On 11/05/18 11:18, Andrzej Lossowsk wrote:
Currently after pivot to the USB disk (extroot),
configuration and data from original root overlay are gone.
Still accessible, but all previous configuration steps must be repeated
(or data from original root overlay must be copied to new USB disk over
Hi,
I'd like to close everything in patchwork from 2017 and ask people to
resubmit in case they still think its applicable. a few patches are
still delegated. please remove your delegation if you do not plan to
handle the patches in the coming days. I'll close everything on the
weekend that i
On 13/05/18 20:58, Dragan Stancevic wrote:
A lot of SoC boards come with integrated SATA it would be nice to be
able to use fio to test performance of those boards.
___
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/m
On 08/05/18 05:31, Paul Blazejowski wrote:
John,
I wanted to ask if the Netgear WNDR3700v4 router will also be ported to
the new ath97 target down the road? And possibly get 4.14 or newer kernel?
Thanks!
Hi Paul,
the aim is to move all board over mid term.
John
__
On 07/05/18 20:34, Arjen de Korte wrote:
Citeren Jo-Philipp Wich :
Hi Bjørn,
the current timings of the DO zone are:
;; ANSWER SECTION:
openwrt.org. 1800 IN SOA ns1.digitalocean.com.
hostmaster.openwrt.org. (
1525688668 ; serial
10800 ; refre
On 07/05/18 08:13, John Crispin wrote:
Hi,
I have just pushed the new ath79 target to trunk. This will replace
ar71xx mid term, switching the target over to pure OF. a few boards
are already supported, would be great if people could start moving
boards over that they use. I am available to
On 07/05/18 11:31, Rafał Miłecki wrote:
On 7 May 2018 at 10:46, Felix Fietkau wrote:
On 2018-05-07 09:47, Rafał Miłecki wrote:
From: Rafał Miłecki
Some maintainers prefer DTS files licensed under permissive license like
MIT / BSD. As all DT bindings should be OS independent and DTS files a
Hi Kevin,
apparently you have a 10->11 patch in your tree that needs to be applied
prior to the 11->12 update
John
___
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
.
The safest solution is to use dual licensing: that way it stays clear
these files can be used in GPL projects without depending on current
belief of licenses compatibility.
Signed-off-by: Rafał Miłecki
Acked-by: John Crispin
---
V2: Use the new "GPL-2.0-or-later" identifier
--
On 07/05/18 09:11, Jo-Philipp Wich wrote:
Hi Joerg, John.
I created an openwrt.org zone on Digital Ocean now so you could delegate
the name servers to ns1.digitalocean.com, ns2.digitalocean.com and
ns3.digitalocean.com, maybe with one of the SPI machines thrown into the
mix...
~ Jo
Hi Joe
Hi,
I have just pushed the new ath79 target to trunk. This will replace
ar71xx mid term, switching the target over to pure OF. a few boards are
already supported, would be great if people could start moving boards
over that they use. I am available to help via ML, mail, irc, ... AHB
wifi is s
On 06/05/18 22:44, Joerg Jaspert wrote:
On 15029 March 1977, Bjørn Mork wrote:
1) update the .org delegation to include *all* NS records for the
openwrt.org zone
I added the soapstone one to the registrar for now, as thats an easy
step to do.
3) possibly consider adding/replacing DNS s
On 06/05/18 17:44, David Woodhouse wrote:
Hello,
I apologize for bringing up this long-standing issue at a time where you
all have need to other issues to take care of. But it's again become a
real pressing issue, at least seen from the networks I have a presence in.
We can host it (primary
this porposal while it was already
taken care of.
Yours sincerely,
Jaap Buurman
On Sat, May 5, 2018, 19:57 John Crispin <mailto:j...@phrozen.org>> wrote:
On 05/05/18 12:27, Jaap Buurman wrote:
> Hi all,
>
> I feel like everybody is just waiting for
On 05/05/18 12:27, Jaap Buurman wrote:
Hi all,
I feel like everybody is just waiting for everybody to agree what
features we want in before coming up with the next step of picking a
date. Obviously this isn't working out very well. Why not turn things
around? Pick a date in a few weeks time on
On 22/03/18 16:22, Sergiy Kibrik wrote:
A lot of devices aren't represented via major/minor numbers
and thus don't have dev entry in their sysfs directory, like
network devices, USB, power supplies etc.
It looks to be the rigth thing to trigger them as well.
Anyway, it's up to the hotplug daem
Hi,
i am afraid you need to refresh once more, fails to apply since the ipv6
fix to patch 670
John
On 03/05/18 21:00, Etienne Haarsma wrote:
* Refreshed patches
Compile-tested: ar71xx
Run-tested: ar71xx
Signed-off-by: Etienne Haarsma
---
include/kernel-version.mk
I'll give it a try tomorrow. If i fail i'll let you know and you can
send a v3 :-D
John
-Original Message-
From: John Crispin [mailto:j...@phrozen.org]
Sent: Tuesday, May 1, 2018 10:28 PM
To: Sandeep Sheriker Mallikarjun - C17018
; lede-
d...@lists.infradead.org
Subject: R
On 02/05/18 00:43, Sandeep Sheriker Mallikarjun wrote:
sending below 3 patches with rebase.
Sandeep Sheriker Mallikarjun (3):
at91: reorganize at91 subtargets
at91: Add SAMA5D2 PTC EK board
at91: refreshing kernel configurations.
Hi,
I am having problems applying this series ontop of
On 30/04/18 21:55, Etienne Champetier wrote:
The idea is to easily get the list of packages taking the most time to build,
and see if we can improve them
v1: Use SetupHostCommand as recommended by John
v2: add space after 'time:', remove useless /usr/bin/time from SetupHostCommand
Signed-off-
On 30/04/18 22:15, Rosen Penev wrote:
There is no usecase for not protecting symlinks that I know of in OpenWrt. Not
even on desktop systems where you have multiple users with a shell.
Hi,
patch descriptions should be wrapped at 75 chars
John
Signed-off-by: Rosen Penev
v2: Move to 10-
On 30/04/18 22:10, Rosen Penev wrote:
Currently, the build system uses an openwrt mirror which does not currently
workand FTP can be unreliable under several circumstances (Ubuntu 16.04 WSL
being an example). This change implicitly allows using all the mirrors to
download.
Changing this to
On 30/04/18 22:15, Rosen Penev wrote:
There is no usecase for not protecting symlinks that I know of in OpenWrt. Not
even on desktop systems where you have multiple users with a shell.
Signed-off-by: Rosen Penev
v2: Move to 10-default.conf file.
Hi,
no need to resend but in future please p
On 19/02/18 19:54, Thomas Huehn wrote:
This patch fixes a bug when someone tries to set up a Wireguard tunnel
to an endpoint where its ip belongs to a local subnet, e.g. in a Freifunk
olsr mesh. The call of proto_add_host_dependency() is just needed in cases
where the endpoint is reachable via
On 16/03/18 01:26, Rosen Penev wrote:
Currently, the build system uses an openwrt mirror which does not currently
workand FTP can be unreliable under several circumstances (Ubuntu 16.04 WSL
being an example). This change implicitly allows using all the mirrors to
download.
Changing this to
On 29/04/18 20:32, Roman Yeryomin wrote:
On 2018-04-27 09:18, John Crispin wrote:
On 17/04/18 00:34, Roman Yeryomin wrote:
On 2018-04-15 20:22, Roman Yeryomin wrote:
On 2018-04-14 20:36, Hans Ulli Kroll wrote:
Hi Roman
On Tue, 10 Apr 2018, Linus Walleij wrote:
On Mon, Apr 9, 2018 at 12
On 31/03/18 00:18, Rosen Penev wrote:
There is no usecase for not protecting symlinks that I know of in OpenWrt. Not
even on desktop systems where you have multiple users with a shell.
Signed-off-by: Rosen Penev
Hi,
does not apply due to bee696d66c95337d91fc0256afbf481dc93ddb27 please
fix
On 31/03/18 00:19, Rosen Penev wrote:
My testing has shown both ath10k and firmware to be unstable. Here is a summary
of results done over two weeks:
ath10k + QCA firmware = driver crash, WiFi dies completely.
ath10k + CT firmware = driver crash. WiFi dies completely.
ath10k-ct + QCA firmware
On 31/03/18 06:22, Etienne Champetier wrote:
The idea is to easily get the list of packages taking the most time to build,
and see if we can improve them
Use SetupHostCommand as recommended by John
Signed-off-by: Etienne Champetier
---
include/prereq-build.mk | 5 +
include/subdir.mk
On 30/03/18 17:34, Hauke Mehrtens wrote:
If the package doe not contain a PKG_HASH just skip the check instead of
making the download fail. The scripts/download.pl script will
automatically skip the hash check in case the hash value equals skip,
otherwise it fails.
Signed-off-by: Hauke Mehrten
On 02/04/18 18:34, Sandeep Sheriker Mallikarjun wrote:
reorganizing at91 subtargets based on sama5 soc features and this fix
below problems.
1. able to set neon flags to sama5d2 & sama5d4 subtargets.
2. fix the make clean which removes all the subtargets in bin folder.
3. able to confi
On 12/04/18 11:41, Rosy Song wrote:
Add hotplug handle script for storage devices,
this will add corresponding option in the
/etc/config/samba file automatically.
If user do not want this feature, it can be cancel
via samba relevant menu option.
Hi,
patch as such looks ok. how
ri, Apr 27, 2018 at 8:41 AM, John Crispin wrote:
On 24/04/18 10:05, Alin Nastac wrote:
This fixes an iptables link error when kernel config include
CONFIG_NETFILTER_XT_MATCH_STATISTIC=y
related to the missing -lm argument on the linker command line. Error is
caused by
the odd looking linke
On 28/04/18 07:13, Rosen Penev wrote:
Switched download from SourceForge to GitHub. It seems the author migrated to
that.
Also fixed the website URL as the SourceForge link is dead.
Compile tested on ar71xx and mvebu. Small size decrease on ar71xx: 30444 vs.
30099 bytes.
Signed-off-by: Ros
On 27/04/18 14:05, Arvid E. Picciani wrote:
- libfstools/mtd.c no longer fails if volume is ro.
- mount_root ramoverlay if no rootfs_data and rootfs is ro
Hi,
this approach is an ugly hack. please do the following
mtd_ope() should always try to open as r/w and if that fails try ro.
then sto
On 02/04/18 16:42, Hauke Mehrtens wrote:
This allows to configure VLAN aware bridges in Linux, it is also
possible to offload these VLAN aware bridges with DSA to some hardware,
which is supported by most of the DSA drivers.
This adds support for the VLAN features mentioned in bridge man page:
On 02/04/18 03:11, Rosen Penev wrote:
Switched download from SourceForge to GitHub. It seems the author migrated to
that.
Also fixed the website URL as the SourceForge link is dead.
Replaced the $(fPIC) macro with PKG_ASLR_PIE. They're both functionally
identital.
very much not so. PKG_AS
On 21/04/18 14:54, Etienne Haarsma wrote:
Cherry picked from trunk.
Signed-off-by: Etienne Haarsma
thanks, did a git cherry-pick -x 22e2b402aee17684781ae705a91fb3645299de9c
John
---
toolchain/gcc/patches/6.3.0/960-fix-ubsan-defref.patch | 11 +++
1 file changed, 11 insertio
On 24/04/18 10:05, Alin Nastac wrote:
This fixes an iptables link error when kernel config include
CONFIG_NETFILTER_XT_MATCH_STATISTIC=y
related to the missing -lm argument on the linker command line. Error is caused
by
the odd looking linker argument ${$*_LIBADD} which get expanded to an e
On 17/04/18 00:34, Roman Yeryomin wrote:
On 2018-04-15 20:22, Roman Yeryomin wrote:
On 2018-04-14 20:36, Hans Ulli Kroll wrote:
Hi Roman
On Tue, 10 Apr 2018, Linus Walleij wrote:
On Mon, Apr 9, 2018 at 12:38 PM, Roman Yeryomin
wrote:
> I have tested them quickly yesterday on nas4220b bo
On 16/04/18 01:25, Simon Paterson wrote:
Kernel support already present.
Patch adds userspace for the 'iLS' suffix model of the RB2011 family.
Enables correct initial switch settings, sysupgrade, etc.
https://mikrotik.com/product/RB2011iLS-IN
Signed-off-by: Simon Paterson
Hi Simon,
patch
On 18/04/18 15:49, Pierre Lebleu wrote:
An extra option (AllowedClientIPs:list) is available to allow
specific clients to use this service.
Hi,
description fails to mention the FW rules being added.
v2: do not create the firewall data if there is no valid interface.
this v2 info needs to
On 19/04/18 22:36, Rosen Penev wrote:
The first mirror is dead and the second is FTP, which can be unreliable at
times.
Tested on Ubuntu 16.04 WSL.
Signed-off-by: Rosen Penev
---
package/boot/uboot-envtools/Makefile | 4 +---
package/boot/uboot-xburst/Makefile | 4 +---
2 files change
On 23/04/18 01:22, Rosen Penev wrote:
I used clang -Weverything and fixed most of the warnings displayed.
this is an explanation of what you did and not what the patch does
John
Signed-off-by: Rosen Penev
---
tools/firmware-utils/src/mkdapimg2.c | 20 +---
1 file cha
lash
trivial. A side effect is not calling callbacks for files which is a
free bonus optimization.
Fixes: cc63723d886fd ("overlay: use lstat rather than stat and make sure there are
no trailing spaces")
Signed-off-by: Rafał Miłecki
Acked-by: John Crispin
---
libfstools/overlay.c
Signed-off-by: Rafał Miłecki
Acked-by: John Crispin
---
libfstools/overlay.c | 46 +-
1 file changed, 45 insertions(+), 1 deletion(-)
diff --git a/libfstools/overlay.c b/libfstools/overlay.c
index a41364c..ebc43f7 100644
--- a/libfstools/overla
On 16/04/18 14:30, Rafał Miłecki wrote:
From: Rafał Miłecki
That function never modifies these strings so it can/should use consts.
It makes it a bit more flexible as now callers can also pass consts.
Signed-off-by: Rafał Miłecki
Acked-by: John Crispin
---
libfstools/libfstools.h | 2
On 12/04/18 12:42, Kristian Evensen wrote:
Hello,
I have recently updated some ramips mt7621-devices (ZBT WG3526) to the
latest nightly. Almost everything seems to work fine, but using either
wifi interface in client mode seems triggers an oops. I see two
different oops-messages:
Message 1:
[
On 02/04/18 18:34, Sandeep Sheriker Mallikarjun wrote:
reorganizing at91 subtargets based on sama5 soc features and this fix
below problems.
1. able to set neon flags to sama5d2 & sama5d4 subtargets.
2. fix the make clean which removes all the subtargets in bin folder.
3. able to confi
On 02/04/18 18:34, Sandeep Sheriker Mallikarjun wrote:
fetching uboot src from linux4sam/u-boot-at91 github for all at91
target.
Signed-off-by: Sandeep Sheriker Mallikarjun
Hi,
Whats the difference between these uboots ? I am guessing its pre-patched ?
John
---
package/boot/uboot-at
On 29/03/18 10:25, rosys...@rosinson.com wrote:
When firmware is new flashed and reboot with a storage device plug in its usb
interface. Though the filesystem is not ready (FS_STATE_UNKNOWN), the
/dev/sda1 still mount on /mnt/sda1 by block-mount, then the system switching
jffs...
root@OpenWrt
On 29/03/18 10:25, rosys...@rosinson.com wrote:
Fix potential memory leak in fstools
Signed-off-by: Rosy Song
Hi,
the description is wrong, this fixes a potential null pointer deref and
i dont really see how probing of a FS would work without a magic so we
probably wont ever hit this case
On 29/03/18 11:57, Jo-Philipp Wich wrote:
Hi,
fstools will use the full libblkid if it is installed on the system,
this should also enable support for all filesystems supported by the
full libblkid.
Adding more and more exotic stuff to libblkid-tiny will bloat the
default fstools install for
On 09/03/18 20:55, John Crispin wrote:
On 09/03/18 20:17, Valentin Spreckels wrote:
Specification:
- SoC: Lantiq VRX 220
- CPU Cores: 2x MIPS 34Kc at 500 MHz
- RAM: 128 MiB 250 MHz
- Storage: 128 MiB NAND flash
- Ethernet: built-in Fast Ethernet switch, only port 2 is used
- Wireless
.
This script mimics the behavior: It loads an openwrt initramfs image.
After this a sysupgrade can be done to persistently install openwrt.
Signed-off-by: Valentin Spreckels
I have been using an ugly shell script to do the same for a few years so ...
Acked-by: John Crispin
---
scripts
from AVM:
+ * Copyright (C) 2004-2014 AVM GmbH
+ * and the OpenWrt TFFS kernel driver:
+ * Copyright (c) 2013 John Crispin
+ *
my owrt mail addr has been invalid since the reboot. please use
j...@phrozen.org
+ * This program is free software; you can redistribute it and/or modify
-ralink-add-sdhci-for-mt7620a-SoC.patch
+++
b/target/linux/ramips/patches-4.14/0046-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch
@@ -4748,7 +4748,7 @@ Signed-off-by: John Crispin
+ { .compatible = "ralink,mt7620-sdhci" },
+ {},
+};
-+MODULE_DEVICE_TABLE(of, rt288x
be looking for a replacement because I'll stay on 4.9
forever?
Best regards,
Maciej
On Mon, Feb 19, 2018 at 7:41 AM, John Crispin <mailto:j...@phrozen.org>> wrote:
On 18/02/18 22:43, Hauke Mehrtens wrote:
The next OpenWrt release will use kernel 4.9 and kerne
On 19/02/18 12:09, Arjen de Korte wrote:
Citeren John Crispin :
On 18/02/18 22:43, Hauke Mehrtens wrote:
The next OpenWrt release will use kernel 4.9 and kernel 4.14 depending
on the target. All targets that are *not* on either kernel 4.9 or 4.14
will not be included in the next release.
I
On 18/02/18 22:43, Hauke Mehrtens wrote:
The next OpenWrt release will use kernel 4.9 and kernel 4.14 depending
on the target. All targets that are *not* on either kernel 4.9 or 4.14
will not be included in the next release.
I did some overview of the kernel version some months ago here:
http:
On 18/02/18 16:35, Hauke Mehrtens wrote:
On 02/18/2018 12:35 PM, John Crispin wrote:
On 17/02/18 13:30, Hauke Mehrtens wrote:
On 02/15/2018 05:34 PM, Tim Harvey wrote:
Testted on a Gateworks GW54xx. Does not support enabling imx-drm modules
yet as those will need some adjustments based on
On 17/02/18 13:30, Hauke Mehrtens wrote:
On 02/15/2018 05:34 PM, Tim Harvey wrote:
Testted on a Gateworks GW54xx. Does not support enabling imx-drm modules
yet as those will need some adjustments based on kernel configs.
v3:
- included missing patch for pcie enumeration fix
v2:
- move dw
On 17/02/18 13:33, Hauke Mehrtens wrote:
On 02/15/2018 05:34 PM, Tim Harvey wrote:
Backport of: http://patchwork.ozlabs.org/patch/860701/
Signed-off-by: Tim Harvey
---
.../generic/pending-4.14/812-pci-dwc-fix-enumeration.patch| 11 +++
1 file changed, 11 insertions(+)
creat
On 20/06/17 19:13, Stefan Tomanek wrote:
While sshd should be favoured over telnetd, having a telnet client on the
router is useful for connecting to other devices in the same LAN.
Signed-off-by: Stefan Tomanek
sorry for the late reply, it has been discussed over and over and the
decision
Hi,
whats on the critical todo list for the upcoming release ? i still have
a few minor things that I'll be adding shortly, apart from that I am
currently not aware of any huge problems. the release will be a mix
between 4.9 and 4.14 afaik !?
John
__
On 24/11/17 14:06, Zefir Kurtisi wrote:
When logd is restarted while 'logread -f' is running, the
logread process terminates, which cumbers debugging in
different use-cases.
This patch adds re-connect functionality to logread. In
follow mode, when the ustream to logd is disconnected,
instead o
On 13/02/18 23:53, Rosen Penev wrote:
Based on Qualcomm driver. Improves iperf3 throughput by ~20mbps on transmit on
Archer C7v4.
this is missing the description of what the patch does.
John
Signed-off-by: Rosen Penev
---
.../drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c |
On 13/02/18 19:27, Ben Greear wrote:
What is the status on this?
I have some new firmware/driver changes I'd like to get upstream
as well, but this series is stuck in limbo. The first two patches
should should be useful for anyone using my ath10k-ct stuff, and the
third will at least help IPQ
On 11/01/18 17:28, Jakub Horák wrote:
Hello LEDE developers,
I found a bug in procd that gets triggered when long lines are printed
by services whose stdout/stderr are being logged. The bug itself is
explained in the attached patch.
However, when I was testing the fix, I found out that the bu
Signed-off-by: John Crispin
---
service/instance.c | 12 +++-
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/service/instance.c b/service/instance.c
index 917b003..27e35b1 100644
--- a/service/instance.c
+++ b/service/instance.c
@@ -469,18 +469,20 @@ instance_stdio(struct
On 17/01/18 14:16, Arne Zachlod wrote:
Signed-off-by: Arne Zachlod
---
target/linux/ar71xx/base-files/etc/board.d/01_leds | 236 ++---
.../ar71xx/base-files/etc/board.d/03_gpio_switches | 12 +-
target/linux/ar71xx/base-files/etc/diag.sh | 40 ++--
3 files change
On 17/01/18 14:23, Arne Zachlod wrote:
Specification:
- SoC: Atheros AR9342
- Flash: 8 MiB
- RAM: 64 MiB
- UART: 1x UART on PCB - 115200 8N1
- Ethernet: 1 x 100 Mbit with passive PoE (24V/0.2A)
Doesn't work:
* Flash via TFTP with Uiquiti Uboot
Installation via vendor firmware:
- upload factor
On 25/01/18 04:29, Rosen Penev wrote:
On Wed, Jan 24, 2018 at 1:56 PM, Hauke Mehrtens wrote:
On 01/24/2018 05:28 AM, Rosen Penev wrote:
At least one application (transmission) depends on CURL_CA_BUNDLE being
set in order to operate properly (Could not connect to tracker errors).
As far as I
On 01/02/18 23:35, Tim Harvey wrote:
Tested on a Gateworks GW54xx
Tim Harvey (4):
kernel: add missing config symbols
imx6: add support for Linux 4.14
imx6: switch to kernel 4.14
imx6: remove support for 4.9
Hi,
karl and hauke posted some comments to the series. I've marked the w
Hi,
the imgtecs pistachio target is apparently EOL'ed and there is no
support for it anymore. imgtec promised to maintain the target inside
our tree but with their current situation don't appear to be able to do
so in future. I'd like to drop the target ASAP.
John
_
Hi
could you resend this with a description text ? I figured out what the
patch does but it would be nice to have it as part of the commit history.
same for the group id patch please ...
John
On 11/02/18 13:07, Yousong Zhou wrote:
Signed-off-by: Yousong Zhou
---
service/instance.c |
On 31/01/18 16:00, Yury Shvedov wrote:
Hi all,
I have a task to universal automatically predict sysupgrade (or
factory) file name on the board, with already installed openwrt. The
filename format is clear inside buildroot, but I can't find the way to
learn CONFIG_TARGET_BOARD and CONFIG_TAR
On 21/01/18 00:01, Etienne Champetier wrote:
The idea is to easily get the list of packages taking the most time to build,
and see if we can improve them
Sending as RFC as this is a quick hack that might break in some case (different
implementation of time)
Signed-off-by: Etienne Champetier
On 09/01/18 15:16, osiverts...@gmail.com wrote:
From: Olof Sivertsson
Drivers may abort a scan by calling cfg80211_scan_done() with a struct
cfg80211_scan_info that sets aborted to true.
To avoid blocking forever consider both NL80211_CMD_NEW_SCAN_RESULTS
and NL80211_CMD_SCAN_ABORTED when wa
On 19/01/18 08:55, Alexandru Ardelean wrote:
On Fri, Jan 19, 2018 at 3:02 AM, Val Kulkov wrote:
On 18 January 2018 at 19:49, Alberto Bursi wrote:
On 01/19/2018 01:05 AM, Val Kulkov wrote:
There is more than a handful of PRs currently bit-rotting in
openwrt/packages that are ready for mer
On 17/01/18 20:41, Zoltan HERPAI wrote:
Hi,
This series will add support for microcode update on x86 targets,
in light of the recent security issues.
While other distributions use an early initramfs approach to update
the microcode as early as possible, in OpenWrt the earliest place
where we
On 18/01/18 09:14, John Crispin wrote:
rather than using flock for procd enabled services we add locking to the
rc.common code.
Signed-off-by: John Crispin
---
package/base-files/files/etc/rc.common | 6 ++
package/system/procd/files/procd.sh| 15 ---
2 files changed
rather than using flock for procd enabled services we add locking to the
rc.common code.
Signed-off-by: John Crispin
---
package/base-files/files/etc/rc.common | 6 ++
package/system/procd/files/procd.sh| 15 ---
2 files changed, 6 insertions(+), 15 deletions(-)
diff --git
This reverts commit 2277cd1249a6952228f36b768beea117c91123a0.
Signed-off-by: John Crispin
---
package/utils/busybox/Config-defaults.in | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/package/utils/busybox/Config-defaults.in
b/package/utils/busybox/Config-defaults.in
index
On 17/01/18 10:54, Koen Vandeputte wrote:
On 2018-01-17 10:43, Karl Vogel wrote:
Shows how long an initd task took, for example:
procd: stop /etc/init.d/dropbear running - took 0.088824s
procd: Update service dnsmasq
procd: Update instance dnsmasq::dnsmasq
procd: running /etc/init.d
On 17/01/18 10:44, Arjen de Korte wrote:
Citeren John Crispin :
On 07/01/18 18:08, Christian Beier wrote:
The existing read functionality feeds the complete JSON to jshn as a
cmdline argument, leading to `-ash: jshn: Argument list too long`
errors for JSONs bigger than ca. 100KB.
This
Hi
merged the first 8 patches, please rework this to additionally fold the
irq imbalance patch into the files/... dir
John
On 11/01/18 16:04, Koen Vandeputte wrote:
Signed-off-by: Koen Vandeputte
---
target/linux/cns3xxx/config-4.9| 300 -
...
On 07/01/18 18:08, Christian Beier wrote:
The existing read functionality feeds the complete JSON to jshn as a
cmdline argument, leading to `-ash: jshn: Argument list too long`
errors for JSONs bigger than ca. 100KB.
This commit adds the ability to read the JSON directly from a file if
wanted,
by a LEDE downstream patch that can't be
upstreamed.
[...]
Tested-by: Stefan Lippers-Hollmann
Acked-by: John Crispin
[0.00] OF: fdt:Machine model: ZyXEL NBG6817
...
[0.00] Kernel command line: rootfstype=squashfs,ext4 rootwait noinitrd
root=/dev/mmcblk0p8
[
On 16/01/18 21:43, Arne Zachlod wrote:
Specification:
- SoC: Atheros AR9342
- Flash: 8 MiB
- RAM: 64 MiB
- UART: 1x UART on PCB - 115200 8N1
- Ethernet: 1 x 100 Mbit with passive PoE (24V/0.2A)
Doesn't work:
* Flash via TFTP with Uiquiti Uboot
Installation via vendor firmware:
- upload factor
On 16/01/18 10:49, Karl Vogel wrote:
Shows how long an initd task took, for example:
procd: stop /etc/init.d/dropbear running - took 0.088824 us
procd: Update service dnsmasq
procd: Update instance dnsmasq::dnsmasq
procd: running /etc/init.d/dnsmasq running
procd: start /etc/init.d/d
Hi,
patch is whitespace mangled and does not apply. How did you send the patch ?
[...]
--- a/target/linux/ar71xx/config-4.4
+++ b/target/linux/ar71xx/config-4.4
@@ -109,6 +109,7 @@ CONFIG_ATH79_MACH_ENS202EXT=y CONFIG_ATH79_MACH_EPG5000=y
CONFIG_ATH79_MACH_ESR1750=y CONFIG_ATH79_MACH_ESR9
On 12/01/18 20:03, Ted Hess wrote:
Hi folks,
I would like to propose we close the issues tab on the
github/openwrt/openwrt source repository as we did for the
lede-project/source repo. We can continue to re-direct people to our
bug-tracker for the mainline sources.
The packages repo remai
On 08/01/18 23:21, Sandeep Sheriker Mallikarjun wrote:
update at91 kernel 4.9.73 to 4.14.11
Signed-off-by: Sandeep Sheriker Mallikarjun
---
target/linux/at91/Makefile | 2 +-
target/linux/at91/{config-4.9 => config-4.14} | 6 +++
On 12/01/18 11:44, Koen Vandeputte wrote:
The Gateworks GW5520 board uses 2x intel gigabit phy's, instead of the
internal i.MX6 FEC phy.
Hi,
e100e is a MAC and not a PHY. please fix up the description.
John
Add support for these.
Signed-off-by: Scott V. Kamp
Signed-off-by: Koen Van
Hi,
few small comments inline.
On 11/01/18 11:27, Catrinel Catrinescu wrote:
Add the Embedded Wireless "Balin" platform, based on AR9344:
http://www.embeddedwireless.de/uploads/Balin_data_2016_10.pdf
Can you please write the HW spec into the commit message ? the PDF link
might be gone one d
call really.
John
Thomas
-Ursprüngliche Nachricht-
Von: openwrt-devel [mailto:openwrt-devel-boun...@lists.openwrt.org] Im
Auftrag von Thomas Endt
Gesendet: Samstag, 6. Januar 2018 18:06
An: 'John Crispin'; 'LEDE Development List'; 'LEDE Project
Administrati
1 - 100 of 708 matches
Mail list logo
