I swapped the CO lines and the chirp in speed dial went away. Clean
access to the CO line every time. So I suspect it is like you have
said CO line is too hot. This is a Weco 5ESS we have in this area.
The switch is about 1.5 miles away.
At 04:31 AM 5/16/2006, you wrote:
>Try swapping co lin
I had this problem on a brand new TDA50 install. I was testing their
voicemail (TVA50) by calling from within the switch. When I called from a
cell or another location, I did not have the problem.
Never did resolve it - except I stopped testing from the switch!
Thanks,
Marc Halberg
The Phone
In a message dated 5/16/2006 1:55:24 P.M. Eastern Daylight Time,
[EMAIL PROTECTED] writes:
I had this problem once with an Avaya Partner system. Called the local telco
and they said the line was a little too "Hot", because of the location to
the CO. They turned down the line and everyth
TED]>
To: KXT help List
Sent: Tue, 16 May 2006 07:17:05 -0700
Subject: Re: KX-T: Squeal on CO line TA824
I've had one 624 do this once.
I unplugged the power, plugged it back in, and everything worked.
It's still doing fine (that was about 4 months ago).
I have no idea what the proble
I forgot to mention that it almost always happens when you use speed
dial, but it's only a short burst/chirp just after the line is
accessed. I unplugged the cables from the modular jacks on the TVS
port and the problem remains, so I know it's not the voice mail
system. I will try swapping out
I've had one 624 do this once.
I unplugged the power, plugged it back in, and everything worked.
It's still doing fine (that was about 4 months ago).
I have no idea what the problem might have been.
Paul Larsen Technical Services
[EMAIL PROTECTED]
www.larsentech.com
714-771-8426 Voice
714-771-8
6 matches
Mail list logo
