Gussets, gussets, gussets I'm starting to really hate gussets. I know it is a
necessary evil but I for one will be glad to finish with them and get to
working on something that really looks like progress. On the up side of things
the fuselage is starting to look really good. I am planning on
-boun...@mylist.net] On Behalf
Of jg7...@mindspring.com
Sent: Thursday, December 07, 2006 9:15 AM
To: KRnet
Subject: KR> Gussets
Gussets, gussets, gussets I'm starting to really hate gussets. I know it is
a necessary evil but I for one will be glad to finish with them and get to
working on somethin
Get 4130 cut to width, Drill and shape, Virg
On Thu, 7 Dec 2006 09:14:30 -0500 "jg7...@mindspring.com"
writes:
>
>
> Gussets, gussets, gussets I'm starting to really hate gussets. I
> know it is a necessary evil but I for one will be glad to finish
> with them and get to working on s
6, 2006 12:40 AM
Subject: Re: KR> gussets
> At 09:25 AM 5/4/2006, you wrote:
>> Some time ago I listed a posting on fitting cross members with
>> gussets already fitted, and somebody replied saying that the
>> curvature of the side frame would pose a problem,
>&g
Some time ago I listed a posting on fitting cross members with gussets
already fitted, and somebody replied saying that the curvature of the side
frame would pose a problem, I did mean to reply but have been lost with other
activities of late, and I know, its a subject which has been flogged
At 09:25 AM 5/4/2006, you wrote:
> Some time ago I listed a posting on fitting cross members with
> gussets already fitted, and somebody replied saying that the
> curvature of the side frame would pose a problem,
> I really think the core of the problem is being missed, being
> that the
HI,
I have a question... does it matter which way the grain of the gussets
are going? I just took a piece of my 5/8 spruce stock and started cutting at
90 and 45 degree angles... is this exceptable?
David Swanson
-
From:
To:
Sent: Wednesday, February 08, 2006 11:09 PM
Subject: KR> gussets
> HI,
>
>I have a question... does it matter which way the grain of the
gussets
> are going? I just took a piece of my 5/8 spruce stock and started cutting
at
> 90 and 45 degree angles...
David, What you are doing is reinforcing the structure. Have the grain
orientation match if possible. If you have glued some with the wrong grain,
mark them with magic marker, leave them until you have covered the sides and
then put a plywood stiffener over the intersection. Don't go back and
Richmond Australia.
- Original Message -
From:
To:
Sent: Thursday, February 09, 2006 4:09 PM
Subject: KR> gussets
> HI,
>
> I have a question... does it matter which way the grain of the
> gussets
> are going? I just took a piec
Grain should run along the diagonal line, Virg
On Thu, 9 Feb 2006 00:09:05 EST bdazzca...@aol.com writes:
> HI,
>
>I have a question... does it matter which way the grain of
> the gussets
> are going? I just took a piece of my 5/8 spruce stock and started
> cutting at
> 90 and
Here is what I did! Get some kids Play Dough, put a piece of wax paper
where the gusset is going to be, squeez the Play Dough in that spot and
remove carefully and, voila, you wil have a perfect three dimensions model.
Regards,
Louis Staalberg
n...@cybertrails.com
Payson, Arizona,USA
34-11.729 N
11
When I was cutting all the gussets for the fuselage I used a trick that
someone told me about and it worked very well. Whether the gusset
has a single angle or compound angle you really don't care what that
angle is, you just want to duplicate it on whatever you are using to cut
, sand, etc. tha
Man, I love KRnet. Why? Because of the bits of information and helpful tips
that can be glean from this site. This is a good example. Thanks Larry
In a message dated 6/2/2003 8:56:32 PM Central Standard Time,
fles...@midwest.net writes:
> Take an old hacksaw blade and brake a section off each
er
it had the gussets in place.
Justin
- Original Message -
From:
To:
Sent: Monday, June 02, 2003 9:55 PM
Subject: Re: KR>gussets
> Man, I love KRnet. Why? Because of the bits of information and helpful
tips
> that can be glean from this site. This is a good example. Thanks La
15 matches
Mail list logo
