When I have done the bodywork on my Kr I've got the best results by mixing
resin and micro ballons (no matter what epoxy-resin you use)at first, to a
very dry mixture(no chance to squeeze on to the surface).Then add "household-
alcohol"(in germany it is called Spititus-about 90-95% alcohol)to g
ewton"
To: kr...@mylist.net
Sent: Tuesday, October 5, 2010 10:19:36 PM
Subject: KR> Need help on the best Epoxy to use with micro balloons.
Hi, I?m a new pilot and a new KR owner;
I live near Houston TX and wanted a inexpensive airplane both to build and to
opperate. I jus
Hi, I?m a new pilot and a new KR owner;
I live near Houston TX and wanted a inexpensive airplane both to build and to
opperate. I just picked up a project that was started in 1974.I bought this Kr
1 (almost completed project) that is in amazingly good shape. It's all there,
motor, prop, gage
; From: da...@windstream.net
> To: waltap...@earthlink.net; kr...@mylist.net
> Subject: RE: KR> Need help identifying kit
> Date: Sun, 6 Jun 2010 22:09:43 -0400
> CC:
>
> I think that the landing gear wedges were for the old retract gear on the
> original KR2.
>
>
Thankyou!
Ok, folks. If anyone in the central Texas area could use these parts in a
build, please let me know.
Walt
-Original Message-
>From: Dan Heath
>Sent: Jun 6, 2010 9:09 PM
>To: 'walt appel' , 'KRnet'
>Subject: RE: KR> Need help identifying k
I think that the landing gear wedges were for the old retract gear on the
original KR2.
See N64KR at http://KRBuilder.org - Then click on the pics
See you at the 2010 - KR Gathering in Richmond, Ky - I39
There is a time for building and a time for FLYING and the time for Flying
has begun.
Daniel
I posted the message below a few weeks ago--thanks for the responses. Since
then I compared a fragment of a packing list to a packing list I found on the
internet for a KR-2S(http://www.jgokey.com/rr_kr2_manual_pt6-6.pdf).
The fragment matched the list for the KR-2S with the exception that the
I am assuming that you already have the Deere dynamo? If not, there are
other very good options.
See N64KR at http://KRBuilder.org - Then click on the pics
See you at the 2010 - KR Gathering in Richmond, Ky - I39
There is a time for building and a time for FLYING and the time for Flying
has begu
To:
Sent: Monday, May 10, 2010 1:05 PM
Subject: Re: KR> Need Help Cutting Spinner
be sure to check with your engine mfg. to see if a composite prop is o.k.,
great plains does not recommend them, see his web site at greatplainsas.com
-- Original Message ----------
From: "Joe Walbu
be sure to check with your engine mfg. to see if a composite prop is o.k.,
great plains does not recommend them, see his web site at greatplainsas.com
-- Original Message --
From: "Joe Walburn"
To:
Subject: KR> Need Help Cutting Spinner
List-Post: krnet@list.krnet.
Brad
Ankerstar
Sent: Sunday, May 09, 2010 1:49 PM
To: KRnet
Subject: Re: KR> Need Help Cutting Spinner
Maybe. I didn't, but then I didn't think of it. My fix may have been
better if I had.
Brad Ankerstar, SW Ohio
N774A
___
Search the KRnet Arc
> Need Help Cutting Spinner
<>
I had a similar dent on the tip of my spinner. I rounded the end of a
hardwood dowel and tapped it from the inside, gently, with a hammer.
Better, but not perfect.
Brad Ankerstar, SW Ohio
N774A
___
Search the KRnet
a said that out loud...
- Original Message -
From: "Dan Heath"
To: "'KRnet'"
Sent: Sunday, May 09, 2010 12:27 PM
Subject: RE: KR> Need Help Cutting Spinner
Should be helpful for any prop.
http://krbuilder.org/Spinner/index.html
See N64KR at http://KRBuilder.
Maybe. I didn't, but then I didn't think of it. My fix may have been
better if I had.
Brad Ankerstar, SW Ohio
N774A
Should be helpful for any prop.
http://krbuilder.org/Spinner/index.html
See N64KR at http://KRBuilder.org - Then click on the pics
See you at the 2010 - KR Gathering in Richmond, Ky - I39
There is a time for building and a time for FLYING and the time for Flying
has begun.
Daniel R. Heath - Lex
1 PM
Subject: Re: KR> Need Help Cutting Spinner
<>
I had a similar dent on the tip of my spinner. I rounded the end of a
hardwood dowel and tapped it from the inside, gently, with a hammer.
Better, but not perfect.
Brad Ankerstar, SW Ohio
N774A
___
<>
I had a similar dent on the tip of my spinner. I rounded the end of a
hardwood dowel and tapped it from the inside, gently, with a hammer.
Better, but not perfect.
Brad Ankerstar, SW Ohio
N774A
If someone could give me a crash (poor choice) course in cutting out an
aluminum spinner to accommodate a composite prop, I'll be most appreciative.
The spinner (SN-4) is from the Aircraft Spruce catalog, page 179 in
2009-2010 catalog, and the prop is a Prince 52-48 composite for a VW1835
engine.
Take pictures of what you have and send them to me. If I don't know what they
are, I will post them on KRBuilder.org for others to have a shot at, for you.
da...@windstream.net
walt appel wrote:
=
Around 30 years ago my father bought part of a kit to build an airplane and
sho
Around 30 years ago my father bought part of a kit to build an airplane and
shortly afterward developed some health problems and never started building it.
He passed away last year and Mom wants me to get rid of the kit. I have been
unable to find any paperwork on the plane and the aviation supp
A fellow named Howard Ainsworth was nice enough to sell me a partially built
KR2. I have had it in my kitchen for a couple of weeks and have looked at it
and found that some of the joints of the side panels have very slight gaps.
Can I just inject a little T88 in them to make it right?
Thanks for
Netters,
Who is closest to dubuque IA to possibly look at a KR2 for my father? There is
one there that is ready for flight but not yet flown?
Lee Van Dyke
LEE:
Contact Mark Jones as I think he is the closest with a lot of experience.
Dubuque is not all that far from me(200 miles or so up the
"Big Ditch") but I don't feel all that competent making the evaluation. The
problem with Mark Jones may be a lot of snow but it would be
not more 2 hours fo
Lee;
I live 25 miles from Dubuque.
Joe Weber phone 608 759 5701
e-mail mo...@mhtc.net
- Original Message -
From: "Lee Van Dyke"
To: "KRnet"
Sent: Wednesday, December 06, 2006 4:32 PM
Subject: KR> need help
> Netters,
>
> Who is closest to
nesday, December 06, 2006 4:32 PM
Subject: KR> need help
> Netters,
>
> Who is closest to dubuque IA to possibly look at a KR2 for my father?
> There is one there that is ready for flight but not yet flown?
>
> Lee Van Dyke
> ___
> S
Greetings: I am currently ready to start the wiring, KR2S 2180 VW,
Looking for assistance regarding placement of items on the firewall and
a wiring diagram that is simple. Dan H. I have spent lots of time on your
site is there anything that you would change? (great stuff )
P.S. I have be
At 10:05 PM 11/24/2006, you wrote:
>Greetings: I am currently ready to start the wiring, KR2S 2180 VW,
>Looking for assistance regarding placement of items on the firewall and
>a wiring diagram that is simple.B.M. Valentine Duncan B.C.
>+
All,
I lost a hard drive with alot of KR info.(No, it wasn't backed up) I
can get much from search but I had many of your web sites saved that had
good construction info and pix such as a recent site with execellent
step by step photos of tail dragger to tri gear and others with
canopys. If y
http://jackandsandycooper.com/kr2.html
My 2003 gathering pictures were mostly of canopies and vents and cowlings.
> [Original Message]
> From: Don Woodyatt
> To:
> Date: 3/5/2004 8:57:12 AM
> Subject: KR>Need help
>
> All,
> I lost a hard drive with alot of KR info.(
29 matches
Mail list logo
