I got good help with my wiring question a few days ago. It's raining so I
turned the crude sketch into a real schematic today. (Make hay while the sun
shines, right?)
This diagram hopefully helps layout the electrical system forward of the
firewall and the wires that pass through to the instrument
Looking for a wiring diagram on the Revmaster 2100 have two yellow leads coming
out of the accessory case with spade ends. This was a project that came in
various tubs so has been a giant jigsaw so far!
Sent from my iPhone
___
Search the KRnet Archive
On 2/18/2018 11:21 AM, Rick Cochenet via KRnet wrote:
> I am putting back together a KR2 and am looking for basic wiring
diagram using Rev Master VW conversion engine...
What kind of ignition system do you have? Electric fuel pumps? That's
the majority of the engine electrical system, and wo
I am putting back together a KR2 and am looking for basic wiring diagram using
Rev Master VW conversion engine...
Sent from my iPhone
___
Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/.
Please see LIST RULES and KRnet i
On 12/3/2011 8:21 PM, Dave Dunwoodie wrote:
> Everything I installed simply mirrored the stub. cable
> examples that came with the various radios - double shielded teflon
> coax. Of all of the cables available, my favorite is RG-142 B/U
Agreed. I was looking for the double shielded aircraft equiva
He was responding to my electrical/wiring question.
On 12/4/2011 10:55 AM, Matt Elder wrote:
> I'm not sure I follow... I wasn't the one with the question?...
> My electrical system is complete, and actually to the letter of what you
> state. Perhaps a reread of the thread is in order?
>
> Than
I'm not sure I follow... I wasn't the one with the question?...
My electrical system is complete, and actually to the letter of what you state.
Perhaps a reread of the thread is in order?
Thanks though :-)
Matt
Dave Dunwoodie wrote:
>Hello Matt;
>
>I read all of the responses and thought
On 12/3/2011 8:21 PM, Dave Dunwoodie wrote:
> Everything I installed simply mirrored the stub. cable
> examples that came with the various radios - double shielded teflon
> coax. Of all of the cables available, my favorite is RG-142 B/U.
Agreed. I was looking for the double shielded aircraft equiv
Hello Matt;
I read all of the responses and thought I'd chime in as well. I think
that everybody has you pointed in a good general direction, so perhaps I
can help get to some specifics and recommendations. When I rewired both
of my airplanes, the first thing to go was anything what wasn't te
rkp...@comcast.net wrote:
The switch that I got calls for shielded wire,but doesn't say anything the
gauge.
=
Wire gauge selection is a function of current carrying capacity, voltage drop
on longer runs and physical strength. Magneto P leads do not carry a great deal
of curre
Hi All,
I'm getting ready to place a order,The question I have is concerning the gauge
of wiring for my ignition switch.The switch that I got calls for shielded
wire,but doesn't say anything the gauge. Thanks for all the help.
Robert Pesak
Hermitage, Tn.
http://photobucket.com/robertskr
Hi Everyone,
I have also started to wire my panel,I think it's relaxing.
Robert Pesak
Hermitage,Tn.
http://photobucket.com/robertskrs
Thanks Dene.
My fax is 015 781 6173
Also thanks to Erric Pitts and Ed that replied.
Regards
- Original Message -
From: "Dene Collett"
To: "KRnet"
Sent: Thursday, September 03, 2009 9:58 PM
Subject: Re: KR> Wiring diagram for King KT76 transponder wanted
Hi Willie I have the drawing..
Hi Willie I have the drawing you are looking for. Give me your fax number
and I will fax it to you.
Regards
Dene Collett
Avlec Projects cc
Port Elizabeth
South Africa
- Original Message -
From: "Willie van der Walt"
To: "KRnet"
Sent: Thursday, September 03, 2009
> I am looking for a wiring diagram for a King KT76 transponder. >
>
Try this link http://www.aeroelectric.com/Installation_Data/KT76-78.pdf
--
Eric Pitts
Terre Haute Ind.
http://eric.pitts.mystarband.net
"Life should NOT be a journey to the grave with the intention of arriving
safely in an at
Message-
From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net] On Behalf
Of Willie van der Walt
Sent: Thursday, 3 September 2009 2:48 PM
To: KRnet
Subject: KR> Wiring diagram for King KT76 transponder wanted
I am looking for a wiring diagram for a King KT76 transponder. Looked all
o
I am looking for a wiring diagram for a King KT76 transponder. Looked all
over on the net but can only find one for the KT76A. If anyone can help
please e-mail it to touri...@intekom.co.za
> I need a wiring diagram for a KR, can anyone help?Just picked up my KR
> Sunday. not sure if a wiring diagram is in the plans or not-- I will need a
> few days to sort through things and see.If not, I will need one
> too!Thanks!Marc Lee Winnig
___
There is not A wiring diagram for the KR. But there may be a lot of them
out there, here is where you can find mine. Any questions about it, just
ask.
http://krbuilder.org/Electrical/index.html
See N64KR at http://KRBuilder.org - Then click on the pics
See you at the 2007 - KR Gathering
There
. Freeman
Indpls, Ind. USA
mfreem...@indy.rr.com
- Original Message -
From: "Marc Lee Winnig"
To: "KRnet"
Sent: Monday, December 11, 2006 4:36 AM
Subject: KR> Wiring Diagram Needed / May have???
>> I need a wiring diagram for a KR, can anyone help?Just picked u
EXCELLENT! Thank you very much---Mike
Just a note to say I have not dropped off the face of the earth and still
building.
Last night I finished and tested all my wiring, and very please to say all
works well. I even have 45 psi oil pressure while cranking without plugs.
I have a bit of Strobe noise in the radio with the squish tuned
http://www.philskr2.50megs.com/photo.html
Sorry all, Dan said he could not find my photo's try this link!!!
The photo's are not the very latest but close.
Two in the second row and the two last spinner photo's.
Not very interesting, but I do not have the KR sitting all together. All I
really n
If any of you guys have several components to couple together on your panel
and would like to have someone else do it for you, check out the following
post I made on the RV list. On the home page you will also find
Aeroelectric's book, which I truly think is a book you need to have on the
shel
I
Thjs business of drilling one hole, or
> running one wire (per night) has got to improve...
>
> Mark Langford, Huntsville, Alabama
> N56ML "at" hiwaay.net
> see KR2S project at http://home.hiwaay.net/~langford
>
>
I know what you mean. I did 2 holes this morning and have a few that I
hav
Joe Horton wrote:
> BTW: did you have a source for the 10mm bolts for mounting the hub to the
> crank flange? With the current climate of the steel industry things are a
> little difficult to come by right now.
I got mine from McMaster Carr at www.mcmaster.com . I'm not sure if you
mean prop hub
t: Re: KR>wiring
I
Thjs business of drilling one hole, or
> running one wire (per night) has got to improve...
>
> Mark Langford, Huntsville, Alabama
Since I am in the process of stringing wire, I thought I would forward this
site for those planning their install. Watch out, it does have metal
implications.
http://steinair.com/
In addition to supplying aviation electrical switches, wire, fuse blocks,
etc, Stein is getting into the harness
Well
Off the top of my head I'm thinking 18 gauge wire. One black (GND) and
one
white... or you can use unshielded wire braid for the GND line and red
wire for
the +12V.
The one downside of the wire you buy at AutoZone/HomeDepot, and Radio
Shack...
it uses cheap plastic insulation cov
ything to
the regs, but remember that a wire will burn up or a wrong bolt will break just
as easily in an experimental as a certified plane.
-Original Message-
From: Rich Meyer
Sent: Feb 24, 2004 11:56 PM
To: 'KRnet'
Subject: RE: KR>WIRING
There's no advantage to ru
You can get the TFFN & THHN wire in different colors through Hi-Line (Hi-
Line.com)
Ed Larsen
Ypsi, MI
Hey Netters,
I am in a dicision mode for wiring for a light added to the tail of my KR2.
The light is an automotive type, added to the rudder like a few other people
have done. My question is what is the best wire to use to link the light to
the switch up front. Gauge of wire, 2 seperate wir
krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net] On
Behalf Of Lee
Sent: Tuesday, February 24, 2004 11:27 PM
To: kr...@mylist.net
Subject: KR>WIRING
Hey Netters,
I am in a dicision mode for wiring for a light added to the tail of my
KR2. The light is an automotive type, added to the rudder lik
Netters,
I have an Icom A200 radio that I am wiring up for my KR2. The molex plug is not
labeled front or back, but the directions say to wire it based on a view from
the front, then left to right. Is the front the part that mounts to the radio,
or the part where the wires insert in with molex p
In a message dated 5/2/03 4:17:47 PM Mountain Daylight Time,
crain...@cfl.rr.com writes:
<< I am thinking that the front is the part facing the radio with the slot
for the flat plug from the radio to be able to insert. >>
That's correct... the front is the mating face.
Jim Haywa
e sure to tell me the street...W. 26th St. or W.12th St?
http://community.webtv.net/paulwasp/paulwaspspad
36 matches
Mail list logo
