Don -
I'm looking for the ones that connect
the bell crank in the stub wing to the aileron.
++
I've not been getting all my e-mails and it seems my IP has been dumping
some of them in "spam" so I'm late on this reply.
I made my push rods using a long
From The Archives. I wrote this a long time ago.I just made two push rods for
my auto pilot and will be making my aileron' push
rods shortly. Wicks had all the stuff you need. All you need is to order
R3/8X083-T6 tubing. Two male rod ends. Item # XM3 and a couple of jam nuts.
Cut your tube t
Stef,
Are you referring to the aileron pushrods from the bellcrank?
I will send you a picture of mine but they are "stock" length as per page 88 of
the KR plans.
Mine measure 5.25 inches from rod end to rod end.
I used 2 AN490htp rod ends riveted to 1/2 inch x.035 Al tubing for the rod.
See pix se
Hi,
Someone out there who is having pics of the push rods? This is one of the last
hardware things we need to fabricate, so some pics and ideas would be great. Or
partnumbers?
Thanks Stef
>
> Op 29 maart 2018 om 19:44 schreef jeb via KRnet :
>
> I mounted the wings! /But/, I've mis
Don -
I'm interested, I'm looking for the ones that connect
the bell crank in the stub wing to the aileron.
On 03/29/18 11:59 AM, donald january via KRnet wrote:
Are you looking for the short ones at the rear root spar? I have an extra
set. januaryd...@gmail.com
On Thu, Mar 29, 2018 at 12:44
Are you looking for the short ones at the rear root spar? I have an extra
set. januaryd...@gmail.com
On Thu, Mar 29, 2018 at 12:44 PM, jeb via KRnet
wrote:
> I mounted the wings! /But/, I've misplaced the push rods for the ailerons
>
> Anybody know a Spruce part # from for the push rods, forks?
I mounted the wings! /But/, I've misplaced the push rods for the ailerons
Anybody know a Spruce part # from for the push rods, forks?
___
Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/.
Please see LIST RULES and KRnet i
7 matches
Mail list logo
