Stef, Are you referring to the aileron pushrods from the bellcrank? I will send you a picture of mine but they are "stock" length as per page 88 of the KR plans. Mine measure 5.25 inches from rod end to rod end. I used 2 AN490htp rod ends riveted to 1/2 inch x.035 Al tubing for the rod. See pix sent direct to your email. Regards Chris a Gardiner
Sent from my iPad > On Apr 6, 2018, at 1:27 PM, Stef den Boer via KRnet <krnet@list.krnet.org> > wrote: > > Hi, > > Someone out there who is having pics of the push rods? This is one of the > last hardware things we need to fabricate, so some pics and ideas would be > great. Or partnumbers? > > Thanks Stef > >> >> >> >> _______________________________________________ >> Search the KRnet Archives at >> https://www.mail-archive.com/krnet@list.krnet.org/. >> Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. >> see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change >> options. >> To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org >> > > > Steph and his dad are building the KR-2S see > http://www.masttotaalconcept.nl/kr2 http://www.masttotaalconcept.nl/kr2 > _______________________________________________ > Search the KRnet Archives at > https://www.mail-archive.com/krnet@list.krnet.org/. > Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options. > To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
