Don - I'm looking for the ones that connect the bell crank in the stub wing to the aileron.
++++++++++++++++++++++++++++++++++++++++++
I've not been getting all my e-mails and it seems my IP has been dumping some of them in "spam" so I'm late on this reply.
I made my push rods using a long 1/4" bolt. After ailerons and control system were centered I determined the length of bolt needed, cut off the head of the bolt, and threaded that end of the bolt. I attached a rod end bearing to each end and adjusted to length. The forces on the push rod are light enough that cut threads verses rolled threads are not an issue. Insure there is no binding of the push rod from max up to max down. You may have to space it off the attach points a bit to eliminate any binding. Keep it simple.........
Larry Flesner _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
