Hi All
I have a very old and (not complete) set of plans for the KR2 and
noticed that they call for 1" foam ribs on the wings but looking at all the
pics on Kr sit like Mark/L no ribs are used. I'm sure some one could explane
why this is so. Thanks in advance.
Albert.
__
Jodel:
My plans call for 1" foam ribs only at the wing attach ribs with 2" foam ribs in
the interior positions of the outer wing panels and plywood ribs for the
interior ribs of the center sections and the outboard ends of the outer wing
panels.
Are anyone elses standard plans different? That
ginal Message -
From:
To: "KRNET"
Sent: Friday, April 14, 2006 10:36 PM
Subject: KR> wing ribs
>
> Hi All
>I have a very old and (not complete) set of plans for the KR2 and
> noticed that they call for 1" foam ribs on the wings but looking at all
the
&
Albert wrote:
> I have a very old and (not complete) set of plans for the KR2 and
> noticed that they call for 1" foam ribs on the wings but looking at all
> the
> pics on Kr sit like Mark/L no ribs are used. I'm sure some one could
> explane
> why this is so
I'm the only guy I know of th
-
From: "Mark Langford"
To: "KRnet"
Sent: Friday, April 14, 2006 10:57 PM
Subject: Re: KR> wing ribs
> Albert wrote:
>
> > I have a very old and (not complete) set of plans for the KR2 and
> > noticed that they call for 1" foam ribs on the w
Hi all
So if I chose not to use ribs ? I would need to glass the inner and outer
foam panel . While I'm at it. Is there a specific tension required on the
w.a.f bolts.Thanks in advance
Albert
___
Alphalink WebMail - http://webmail.alphalink.c
At 04:42 PM 4/15/2006, you wrote:
>Hi all
>So if I chose not to use ribs ? I would need to glass the inner and outer
>foam panel .
>Albert
+++
Not necessarily but use the ribs and save the weight of the extra
glass and resin. Using the ribs will
Ok I'll use the ribs thanks again.
Albert
On Sat, 15 Apr 2006 18:07:32 -0500, Larry&Sallie Flesner wrote
> At 04:42 PM 4/15/2006, you wrote:
> >Hi all
> >So if I chose not to use ribs ? I would need to glass the inner and outer
> >foam panel .
> >Albert
>
do not forget the washers under the nut and bolt, Virg
On Sat, 15 Apr 2006 18:07:32 -0500 Larry&Sallie Flesner
writes:
> At 04:42 PM 4/15/2006, you wrote:
> >Hi all
> >So if I chose not to use ribs ? I would need to glass the inner and
> outer
> >foam panel .
> >Albert
>
Thanks for the reminder Virg.
Albert
On Sat, 15 Apr 2006 22:08:13 -0400, VIRGIL N SALISBURY wrote
> do not forget the washers under the nut and bolt, Virg
>
> On Sat, 15 Apr 2006 18:07:32 -0500 Larry&Sallie Flesner
> writes:
> > At 04:42 PM 4/15/2006, you wrote:
> > >Hi all
> > >So if I chose
What adhesive do we use to glue the paper template to the birch ply prior to
cutting out the wing ribs from the sheets of ply.
Thank you for your help;
Dan Harris
In a message dated 4/20/2004 11:24:03 AM US Mountain Standard Time,
hhductwo...@pacific.net writes:
What adhesive do we use to glue the paper template to the birch ply prior to
cutting out the wing ribs from the sheets of ply.
I went to Wal-Mart and bought the cheapest spay on adhesive I could
Dan,
You can use just plain flower and water paste. The important thing is
to go very slow and follow the line exactly
Bob Stone, Harker Heights, Tx
rsto...@hot.rr.com
- Original Message -
From:
To: "KRnet"
Sent: Tuesday, April 20, 2004 2:23 PM
Subject: KR> Wing
et"
> Sent: Tuesday, April 20, 2004 2:23 PM
> Subject: KR> Wing Ribs
>
>
>> What adhesive do we use to glue the paper template to the birch ply
>> prior
> to
>> cutting out the wing ribs from the sheets of ply.
>>
>> Thank you for your help;
>
14 matches
Mail list logo
