On 7/10/2019 10:55 AM, GARRY COWLES via KRnet wrote:
Is 2 part varnish needed for kr spars and boat or is spar varnish ok
++
A good quality spar varnish should be sufficient to coat all areas, such
as inside the spars before
All lumber surfaces exposed to air need to be sealed, including bolt holes
and the cavities inside the spars.
You can use the same type epoxy that was used to build the wooden parts.
After mixing the two A and B parts, thin with a small amount of Acetone and
paint the mixture on with a disposabl
Is 2 part varnish needed for kr spars and boat or is spar varnish ok
Thanks
Sent from my iPhone
___
Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/.
Please see LIST RULES and KRnet info at http://www.krnet.org/info.html.
I think the real question is varnish better than polyurethane or are they about
the same
Paul Visk
Belleville, Il.
618-406-4705
Sent from my HTC on the Now Network from Sprint!
- Reply message -
From: "Doran Jaffas"
List-Post: krnet@list.krnet.org
Date: Tue, Dec 31, 2013 6:08 pm
Subj
While I was varnishing the insides of my wing spars I usually ended up
with extra varnish. I resisted the temptation to use the extra varnish under
the cockpit floor not knowing if I would need to glue in a piece of wood for
something. I had a moment of weakness and varnished the first 2 ba
^
Justin
N116JW
www.geocities.com/attngrabber14/Home
- Original Message -
From:
To:
Sent: Monday, December 08, 2003 12:16 AM
Subject: Kr>Varnish Removel/Rudder Peddles
> While I was varnishing the insides of my wing spars I usually ended
up
> with extra varnish. I resist
Netters,
A couple of topics:
1. Varnish. The only place varnish should be used in modern aircraft
building is over epoxy sealed wood that is going to be left natural
("bright" in boatbuilder's terminolgy) and will be exposed to sunlight. The
varnish protects the clear epoxy from ultraviolet li
7 matches
Mail list logo
