KR> Slick 4216

2008-10-12 Thread Robin Macdonald
Netheads, I have a Slick 4216, I am after some information on it before I pull it apart. Would appreciate if anyone can help, O/H, clearances, setup etc. Thanks Robin New Zealand r.macdon...@clear.net.nz

KR> Slick 4216

2008-10-12 Thread phil brookman
hi robin would also like any info you can get too phil p...@ntlworld.com - Original Message - From: "Robin Macdonald" To: "KRnet" Sent: Monday, February 26, 2007 7:25 PM Subject: KR> Slick 4216 > Netheads, > > I have a Slick 4216, I am after some in

KR> Slick 4216 Mag

2008-10-12 Thread mtmcgo...@aol.com
Unfortunately, I have a single ignition system using the 4216. I think it is well worth my time and $$$ to either get a second system or change to the 4316. Thanks for the info. Mike Mcgowan N4288C

KR> Slick 4216 Mag

2008-10-12 Thread Brian Kraut
: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net]On Behalf Of mtmcgo...@aol.com Sent: Sunday, December 24, 2006 1:20 PM To: kr...@mylist.net Subject: Re: KR> Slick 4216 Mag Unfortunately, I have a single ignition system using the 4216. I think it is well worth my time and $$$ to either

KR> Slick 4216 Mag

2008-10-12 Thread mtmcgo...@aol.com
Everything I've read on here about the 4216 is not good. The KR-2 that I'm restoring has one, the last owner says it worked fine. Should I trash it and buy a 4316 or what? Mike McGowan N4288C _mtmcgowan@aol.com_ (mailto:mtmcgo...@aol.com)

KR> Slick 4216 Mag

2008-10-12 Thread Dan Heath
If you have dual ignition, for sure, run it till it quits. I have one and it is working fine. Before I got my inspection, the inspector did some research on it, and sent me this note about it: Mr. Heath, The slick 4216 has an AD on the coil. It appears that the serial number of your mag does not

KR> Slick 4216 Mag

2008-10-12 Thread Don Chisholm
use it mtmcgo...@aol.com wrote: Everything I've read on here about the 4216 is not good. The KR-2 that I'm restoring has one, the last owner says it worked fine. Should I trash it and buy a 4316 or what? Mike McGowan N4288C _mtmcgowan@aol.com_ (mailto:mtmcgo...@aol.com)

KR> Slick 4216 Mag

2008-10-12 Thread Larry&Sallie Flesner
At 04:28 AM 12/24/2006, you wrote: >Mr. Heath, The slick 4216 has an AD on the coil. It appears that the serial >number of your mag does not apply. However it would be helpful, if you could >get a local A&P to make a log entry to that. The AD is 81-16-05. >Daniel R. Heath ++

KR> Slick 4216 Mag

2008-10-12 Thread Brian Kraut
krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net]On Behalf Of Larry&Sallie Flesner Sent: Sunday, December 24, 2006 9:35 AM To: KRnet Subject: Re: KR> Slick 4216 Mag At 04:28 AM 12/24/2006, you wrote: >Mr. Heath, The slick 4216 has an AD on the coil. It appears that the serial >numb

KR> slick 4216 magneto

2008-10-12 Thread Don Chisholm
Anyone looking for an inexpensive magnetro for a VW engine? There's one on ebay that you should be able to pick up cheap

KR> slick 4216 magneto

2008-10-12 Thread Brian G. Douglas
line. Brian G. Douglas N8575C KR2 w/nose wheel Killeen Texas bgd...@vvm.com ps the $20 is to motivate me to find it, get to the post office, and pay the gas bill - Original Message - From: "Don Chisholm" To: Sent: Monday, December 18, 2006 7:37 AM Subject: KR> slick 4216