Please correct me if you have experienced different
+++
Stand corrected - very effective peel ply (synthetic material) is
available from the drapery store at a fraction the cost and I doubt that
any release agent is involved.
I wish I could be more specific, but my wife found it and
Make a test piece with the material you have.
KRRon
- Original Message -
From: "Steve Jacobs"
To: "'KRnet'"
Sent: Wednesday, August 24, 2005 12:10 AM
Subject: RE: KR> Procedure to cover glass cloth on foam.
> Please correct
- Original Message -
From: patrusso<mailto:patru...@sover.net>
To: KRnet<mailto:kr...@mylist.net>
Sent: Monday, August 22, 2005 5:26 PM
Subject: Re: KR> Procedure to cover glass cloth on foam.
Dubi
One other aspect of peel ply is that it helps to save ove
money?
-Jeff
>From: "Mike Turner"
>Reply-To: KRnet
>To: "KRnet"
>Subject: Re: KR> Procedure to cover glass cloth on foam.
>Date: Tue, 23 Aug 2005 20:52:04 -0500
>MIME-Version: 1.0
>X-Originating-IP: [65.54.161.203]
>X-Originating-Email: [aviato...@
To:
Sent: Tuesday, August 23, 2005 9:42 PM
Subject: Re: KR> Procedure to cover glass cloth on foam.
>
> Does the peel ply actualy soak up the resin or does the resin work through
> the cloth to sit ontop of the peel ply. Can you use the cloth more then
> once?
>
> The problem I ha
Be sure there is enough resin to get the peel ply wet, even if you have to
add some back. You must be getting your layup too dry.
Carbon fiber is 5 times lighter and 5 times more expensive. It is also
stronger and more brittle. It also blocks radio waves. Used in the right
places for the right rea
ply.
When you remove the peel ply you see the thin layer of resin.[ If the cloth
wave is present, you didn't add enough resin].
KRRon
- Original Message -
From: "wilder_jeff Wilder"
To:
Sent: Tuesday, August 23, 2005 9:42 PM
Subject: Re: KR> Procedure to cover g
1. Resin is less dense that fiberglass or any other cloth.
2. Therefore the cloth floats on top of the resin layer,
That does not make sense, the less dense material should be what floats!
i.e.: wood is less dense than water so it floats. Steel is denser than
water so it sinks.
Joachim
OK it's the reverse. You got the Idea.
Ron
- Original Message -
From: "Joachim Saupe"
To: "Ron Eason , KRnet"
Sent: Wednesday, August 24, 2005 3:39 PM
Subject: Re: KR> Procedure to cover glass cloth on foam.
>
> 1. Resin is less dense that
- Original Message -
From: Robert Morrissey<mailto:cam...@earthlink.net>
To: KRnet<mailto:kr...@mylist.net>
Sent: Monday, August 22, 2005 8:40 PM
Subject: Re: KR> Procedure to cover glass cloth on foam.
Dubi, see # 8
Mike Turner
Jackson, Missouri
Insert this between 4. and 5.
Apply Peel Ply to the epoxied glass cloth and roll out to ensure there are no
voids. When dry (after step 5) remove Peel Ply and minimal sanding will be
required.
Bernie McLean
Poplar Grove IL
> Hello Krnet members!
>
> I would like to understanding the glas
Hello Krnet members!
I would like to understanding the glassing procedure on foam.
Follow the procedure as I understanding.
1. Sending the foam.
2. Cover/squeegee over the foam with slurry (Micro + epoxy)
3. Cover the wet slurry with glass cloth.
4. Cover over the glass cloth
your layup list looks good to me&there are vairiations to the layup , cut &
layup a layer at a time on the foam or stack all layers on some plastic
sheet,wet them, then apply the layer buildup to the foam,happy sanding. steve
jones,venice fl, n212kr
nt to have a superior finish these my help.
You will eventually find what is best for your taste after a few tries.
KRRon
- Original Message -
From: "Dubi Gefen"
To:
Sent: Monday, August 22, 2005 1:01 PM
Subject: KR> Procedure to cover glass cloth on foam.
> Hello Krnet
squeegee
off the excess. Good luck.
- Original Message -
From: "Dubi Gefen"
To:
Sent: Monday, August 22, 2005 2:01 PM
Subject: KR> Procedure to cover glass cloth on foam.
> Hello Krnet members!
>
> I would like to understanding the glassing procedure on foam.
>
&g
Hello KR net members,
I would like to add one question to what Dubi Gefen is asking. It relates
to what he calls step 1. Sanding the foam.
With the thicker spars of the new airfoil is it possible to put relief
cuts into the structure of the wing, both foam and wood, so that when all
the plies a
I have seen "peel-ply" mentioned several times. What is it?
Peter
- Original Message -
From: "Ron Eason"
To: "KRnet"
Sent: Monday, August 22, 2005 9:51 PM
Subject: Re: KR> Procedure to cover glass cloth on foam.
> Their is some variations to the fo
RELEASE FABRIC BLB1
Ply B peel ply coated with a release agent that releases all aircraft resins
up to 400 degrees F. Use with R300 sensitive tape as all coated peel plies
have the potential to transfer. 60" wide, 2 oz. nylon peel ply is .004 -
005 thickness. Grab tensile: warp - 110 LBS. filling
://mywebpage.netscape.com/n886mj
- Original Message -
From: "Dan Heath"
To:
Sent: Tuesday, August 23, 2005 3:48 AM
Subject: Re: KR> Procedure to cover glass cloth on foam.
> RELEASE FABRIC BLB1
>
> Ply B peel ply coated with a release agent that releases all aircraft
resins
> up t
6MJ)
> Wales, WI USA
> E-mail me at flyk...@wi.rr.com
> Visit my KR-2S CorvAIRCRAFT web site at
> http://mywebpage.netscape.com/n886mj
>
>
> - Original Message -
> From: "Dan Heath"
> To:
> Sent: Tuesday, August 23, 2005 3:48 AM
> Subject: R
sday, August 23, 2005 6:01 AM
Subject: Re: KR> Procedure to cover glass cloth on foam.
> Simply put Peel Ply is a Dacron type of cloth which has been
treated
> with a release agent which prevents it from permanently adhering to
epoxy.
> Immediately after you have done a fiber
21 matches
Mail list logo
