Insert this between 4. and 5. Apply Peel Ply to the epoxied glass cloth and roll out to ensure there are no voids. When dry (after step 5) remove Peel Ply and minimal sanding will be required.
Bernie McLean Poplar Grove IL > Hello Krnet members! > > I would like to understanding the glassing procedure on foam. > > Follow the procedure as I understanding. > > 1. Sending the foam. > 2. Cover/squeegee over the foam with slurry (Micro + epoxy) > 3. Cover the wet slurry with glass cloth. > 4. Cover over the glass cloth with pure epoxy and squeegee off any > excess epoxy. > 5. Wait two day, when all the slurry/epoxy is dry. > 6. Sending the surface area. > 7. Use macro slurry to fill in unsmooth area. > *8 keep the micro off the wood spars this requires pure epoxy
