I have seen "peel-ply" mentioned several times. What is it? Peter ----- Original Message ----- From: "Ron Eason" <r...@jrl-engineering.com> To: "KRnet" <kr...@mylist.net> Sent: Monday, August 22, 2005 9:51 PM Subject: Re: KR> Procedure to cover glass cloth on foam.
> Their is some variations to the following procedure but basically it's > standard. > I have added the following steps in my practice. > 2a. I allow the slurry to cure. > 2b. Sand and fill voids, sand and smooth out surfaces to near final > finish. > 4a.Add peal-ply cloth over the fiberglass. > If you want to have a superior finish these my help. > You will eventually find what is best for your taste after a few tries. > KRRon >
