Hi Netters,
I am using a Ray Allen trim system with the LED-position indicator.
Yesterday during testing I discovered that when pressing the radio
transmit button the LED indicator indicates maximum travel and the LED
lights very weak.
Ray Allen says that the LED indicator is sensitive to RF pow
[mailto:krnet-boun...@mylist.net]On
Behalf Of driess...@tiscali.nl
Sent: Wednesday, March 15, 2006 2:29 PM
To: kr...@mylist.net
Subject: KR> Problem with Trim indicator
Hi Netters,
I am using a Ray Allen trim system with the LED-position indicator.
Yesterday during testing I discovered that w
...@mylist.net]On
Behalf Of Mark Jones
Sent: Wednesday, March 15, 2006 2:48 PM
To: driess...@tiscali.nl; KRnet
Subject: RE: KR> Problem with Trim indicator
Marcel,
I too have the same set up as you and it sounds as if our antenna and
cable are very close to being the same. I too get the fa
Mark Jones wrote:
> I have done nothing and just ignore it. So far
> after 70 flight hours there have been no problems.
Ditto, but with 160 hours and lots of radio transmissions (500 landings).
I've even keyed the mic and talked for a minute at a time back when Bill
Clapp was "instructing" and
At 03:18 PM 3/15/2006, you wrote:
>Mark Jones wrote:
>
> > I have done nothing and just ignore it. So far
> > after 70 flight hours there have been no problems.
+
I had similar problems when I first installed the system and before
long the in
If the problem with the RF coupling to the trim wire is back in the
tailcone, can't you just wrap some aluminum foil around the wiring where it
runs close to the antenna? It wouldn't be visible back in the tailcone and
wouldn't be any worse for the antenna than having a wire there.
See Mark La
Hi,
I already tried wrapping aluminium foil around the trim wire. I even
grounded the foil. This didn't bring any improvement.
Since Mark J. and Mark L. are having the same problem and their LED-
indicator still works fine even after many ours of flying I will live
with this problem and hope th
Try some small co-ax cable RG-58 or smaller. Check with a HAM
radio operator, Virg
On Thu, 16 Mar 2006 20:22:03 +0100 (CET) "driess...@tiscali.nl"
writes:
> Hi,
>
> I already tried wrapping aluminium foil around the trim wire. I even
>
> grounded the foil. This didn't bring any improv
8 matches
Mail list logo
