Try some small co-ax cable RG-58 or smaller. Check with a HAM radio operator, Virg
On Thu, 16 Mar 2006 20:22:03 +0100 (CET) "driess...@tiscali.nl" <driess...@tiscali.nl> writes: > Hi, > > I already tried wrapping aluminium foil around the trim wire. I even > > grounded the foil. This didn't bring any improvement. > > Since Mark J. and Mark L. are having the same problem and their > LED- > indicator still works fine even after many ours of flying I will > live > with this problem and hope that my indicator doesn't break down. > > Thanks for all your input. > > Marcel > http://home.tiscali.nl/~driessen2/ > > > > > If the problem with the RF coupling to the trim wire is back in the > > tailcone, can't you just wrap some aluminum foil around the wiring > where it > runs close to the antenna? It wouldn't be visible back in the > tailcone and > wouldn't be any worse for the antenna than having a wire there. > > See Mark Langford if you need some aluminum foil ;o) > > Oscar Zuniga > San Antonio, TX > > > > > _______________________________________ > Search the KRnet Archives at > http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html > > Virgil N. Salisbury - AMSOIL www.lubedealer.com/salisbury Miami ,Fl
