KR> Intake Manifold - Oil cooler relocation.

2008-10-12 Thread Brian Kraut
You have probably seen mine at www.engalt.com/kr2.htm under the engine section. It worked good for me. Not so sure how well it would work with the Ellison carb. I had the updraft Zenith which necessitated an extended lower center section of the cowl so it was easy to run the air intake line unde

KR> Intake Manifold - Oil cooler relocation.

2008-10-12 Thread Randy Smith
It really does not matter were the cooler is installed as long as you have high pressure on one side and low pressure on the other. That is the only way air will flow threw. The Revmaster VW I owned at > one time used a larger --- "Larry H." wrote: Air is > forced through it and just ends up in

KR> Intake Manifold - Oil cooler relocation.

2008-10-12 Thread Dan Heath
I have a GPASC intake manifold. I have looked at the Revmaster, and it looks like one copied the other. I also have looked at the one on the AeroVee site. It looks more like what I would like to have, but they will not sell it separately. They say they have so much demand for the engine kits th

KR> Intake Manifold - Oil cooler relocation.

2008-10-12 Thread Mark Langford
Dan Heath wrote: > Also, with the carb down under, has anyone also > put an oil cooler, somewhere, "not on top"? The second and third photos at http://home.hiwaay.net/~langford/corvair/ show how I mounted my Corvair oil cooler to the firewall and ran a duct to it. I got the idea from Bobby M

KR> Intake Manifold - Oil cooler relocation.

2008-10-12 Thread Mark Jones
Dan Heath wrote: > Also, with the carb down under, has anyone also > put an oil cooler, somewhere, "not on top"? Dan, this is how I did mine. Very similar to Langford's. http://www.flykr2s.com/oilcooling.html Mark Jones (N886MJ) Wales, WI My Web site: http://www.flykr2s.com/ Mailto:flyk...@wi.

KR> Intake Manifold - Oil cooler relocation.

2008-10-12 Thread Larry H.
My old Mooney has the oil cooler mounted in the face of the engine cowling in about the same place as where Mark's inlet is. The opening is rectangular to match the shape of the oil cooler though. Air is forced through it and just ends up inside the engine cowling (not ducted) on the back side o

KR> Intake Manifold - Oil cooler relocation.

2008-10-12 Thread Phil Matheson
Dan Before I mounted my cooler under and behind the engine, I was going to mount it flat against the firewall ( or about 1 inch or so off it)and use the fire wall as the outlet, allowing the air to run down the firewall and exit out the bottom.( with a light guard) OR I was going to mount if on