Thanks for the drawing. I found some Grumman legs so I will be using those and
cutting them appropriately.
Thanks
Craig
N886MJ - reinvented
> On August 18, 2019 at 11:21 AM larry howell via KRnet
> wrote:
>
>
> I was watching Craig’s video and noticed he was planning to just spin his
> la
I was watching Craig’s video and noticed he was planning to just spin his
landing gear to the front side of the spar. As is it will not put the axles far
enough forward, his plane may end up tipsy wanting to fall on its nose with the
Tricycle legs. They are different according to this front page
Here is my story on the Diehl legs on N886MJ. When I was building 6MJ I highly
considered setting it up as a tail dragged. I purchased the gear from an
individual in Rhode Island and actually had everything clamped in place and
almost drilled the holes. Then I got to thinking how nice the KR loo
On 8/17/2019 11:40 PM, larry howell via KRnet wrote:
If I recall correctly a straight side of the landing gear never goes against
the spar whether it’s a tail dragger or a tricycle landing gear.
+++
On 8/17/2019 11:40 PM, larry howell via KRnet wrote:
I took these dimensions off of one of the top pieces I took off of the spar.
+++
Very interesting. I have a full size drawing of a 30" gear leg if I
could find it
A bunch of years ago a friend of mine wrecked his tail dragger KR that was
built in California. He wanted me to convert it to a Nosedragger/Tricycle Gear.
Both of his landing gear broke about in half. I took these dimensions off of
one of the top pieces I took off of the spar. Look at the dimens
Netheads
Dan replied to my email he has been away then his computer crashed.
Not sure how he's getting on.
robin.
Netheads,
I have ben trying to get hold of Dan Diehl as well, I have just had an email
back from him.
The address was d...@diehlaero.com
Good Luck
Robin.
The email Address provided on his web page does not work - does anyone
have a current address for Dan
I have been trying d...@cuttingedge-tech.com
Thanks
Steve J
Steve,
Try
Jim Morehead
Cameron Park, CA
on 4/29/04 10:19 AM, Stephen Jacobs at ask...@microlink.zm wrote:
>
> The email Address provided on his web page does not work - does anyone
> have a current address for Dan
>
> I have been trying d...@cuttingedge-tech.com
>
> Thanks
>
> S
Steve, ry
Jim Morehead
.
Thank you
Steve
11 matches
Mail list logo
