Thanks for the drawing. I found some Grumman legs so I will be using those and cutting them appropriately.
Thanks Craig N886MJ - reinvented > On August 18, 2019 at 11:21 AM larry howell via KRnet <krnet@list.krnet.org> > wrote: > > > I was watching Craig’s video and noticed he was planning to just spin his > landing gear to the front side of the spar. As is it will not put the axles > far enough forward, his plane may end up tipsy wanting to fall on its nose > with the Tricycle legs. They are different according to this front page of > Dan Diehl's instructions. > > > Larry H > > > On Aug 18, 2019, at 9:33 AM, Flesner via KRnet <krnet@list.krnet.org> wrote: > > > >> On 8/17/2019 11:40 PM, larry howell via KRnet wrote: > >> I took these dimensions off of one of the top pieces I took off of the > >> spar. > > > > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > > > > Very interesting. I have a full size drawing of a 30" gear leg if I could > > find it . I did notice the 20 degree angle cut on the top of the leg. As > > the leg is attached very near the CG it tends to agree with Tony Bingalis > > in one of his books. He recommends an angle of 15 degrees forward _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
