Hello everyone,
I have a nearly completed KR-1 that I have been working on for over a year
and a used VW 1835 that needs to be completely gone through. I went to one of
William Wynn's seminars and was sold on the corvair engine. At the time I just
figured that I would use a corvair engine
Hello everyone,
I have a nearly completed KR-1 that I have been working on for over a year
and a used VW 1835 that needs to be completely gone through. I went to one of
William Wynn's seminars and was sold on the corvair engine. At the time I just
figured that I would use a corvair engine w
Steve Henderson wrote:
>I have a nearly completed KR-1 that I have been working on for over a
> year and a used VW 1835 that needs to be completely gone through. I went
> to one of William Wynn's seminars and was sold on the corvair engine. At
> the time I just figured that I would use a c
;Mark Langford"
To: "KRnet"
Sent: Tuesday, April 26, 2005 12:31 PM
Subject: Re: KR> Corvair Engine Question
> Steve Henderson wrote:
>
>>I have a nearly completed KR-1 that I have been working on for over a
>> year and a used VW 1835 that needs to be com
Steve Henderson wrote:
> Would I need to do much, if any, reinforcing to the firewall to handle the
> extra weight?
The KR2S plans are beefed up with an extra shelf up top, and an extra 5/8"
doubler behind the top of the firewall. We had this discussion last week or
the week before, I think it
Floyd Neff of Monroe, Iowa built and still has a KR-1 with a corvair engine
and a self designed/built PSRU. He flew it for almost 200 hour until he
decided he was getting just a little to old for the hot rod. It has been
reported that he did a 225 mph+++ high speed pass over the Knoxville run
hey group,
I have found a '64 Corvair engine and was curious if I would be able
to use this engine in a KR-2S. Is there any special parts I would need to use
this engine? Is there a particular year I should use instead? I have noticed in
a couple web pages most went with a late '60's en
Get William Wynne's book and check the block numbers before you do anything.
Ray
bdazzca...@aol.com wrote:
hey group,
I have found a '64 Corvair engine and was curious if I would be able
to use this engine in a KR-2S. Is there any special parts I would need to use
this engine? Is there a parti
> corvair engine question
Get William Wynne's book and check the block numbers before you do anything.
Ray
bdazzca...@aol.com wrote:
hey group,
I have found a '64 Corvair engine and was curious if I would be able
to use this engine in a KR-2S. Is there any special parts I would need
David wrote:
>I have found a '64 Corvair engine and was curious if I would be
able
> to use this engine in a KR-2S. Is there any special parts I would need to
use
> this engine? Is there a particular year I should use instead?
The only way you can use that engine (within reason) is if you
10 matches
Mail list logo
