I made mine from 1x1/8 aluminum bar stock. Couldn’t be any simpler than that. Just a u shaped bracket rubber lined to grip the battery. It is mounted on the shelf behind the seat. It is not going anywhere. Mark JonesOldsmar, FlN771MJ “WunderBird”www.flykr2s.comflyk...@gmail.comOn Feb 20, 2025, at
👍👍😳
Mark Jones
Oldsmar, Fl
N771MJ “WunderBird”
www.flykr2s.com
flyk...@gmail.com
> On Jan 20, 2025, at 4:54 PM, Larry Flesner via KRnet
> wrote:
>
> On 1/20/2025 2:38 PM, Mark Jones via KRnet wrote:
>
>> Technically, WunderBird made its first flight today.
Technically, WunderBird made its first flight today. I did four high speed runs
down 05 at KZPH today and on the third one she broke loose and flew about 30
yards. Getting there. 😀
Mark Jones
Oldsmar, Fl
N771MJ “WunderBird”
www.flykr2s.com
flyk...@gmail.com
--
KRnet mailing list
KRnet@list.
Hi guys,
I’m almost ready to take to the Air. The last high speed taxi test revealed a
leaking right wing fuel tank. I capped off this tank, and will fly with the
left wing tank, which is a 10 gallon tank. And for those of you that noticed my
brake lines and commented on those in the past from t
Zero😀I have about 30 hours taildragger. First 10 hours flight time was J3. I
loved the J3.
Mark Jones
Oldsmar, Fl
N771MJ “WunderBird”
www.flykr2s.com
flyk...@gmail.com
> How many "bush planes" use tri-gear.
>
> Larry Flesner
>
> P.S. You were kind to pull the airplane back to the hangar b
No. Never did.
I love the nose wheel attitude on the ground. Makes life real simple.
Mark Jones
Oldsmar, Fl
N771MJ “WunderBird”
www.flykr2s.com
flyk...@gmail.com
> On Jan 15, 2025, at 11:24 PM, Phillip Matheson via KRnet
> wrote:
>
> Mark
> Ever considered a tailwheel ??
> Phil
> Sent f
www.flykr2s.com
>
>
> On Wed, Jan 15, 2025 at 12:49 PM Stef den Boer via KRnet <
> krnet@list.krnet.org> wrote:
>
>> Mee too
>>
>> Op 15-01-2025 16:56 CET schreef lee vandyke2.com :
>>
>>
>> Shows up a video is private.
>> Lee
video is private.
> Lee Van Dyke
>
> On Jan 15, 2025, at 7:54 AM, mark jones via KRnet
> wrote:
>
> https://youtube.com/shorts/4qRenGH5Y4U?si=hvjFFbBDmSsSkUsi
>
>
> Mark Jones (N771MJ)
> Oldsmar, FL
>
> flyk...@gmail.com
> www.flykr2s.com
> --
> KRnet
https://youtube.com/shorts/4qRenGH5Y4U?si=hvjFFbBDmSsSkUsi
Mark Jones (N771MJ)
Oldsmar, FL
flyk...@gmail.com
www.flykr2s.com
--
KRnet mailing list
KRnet@list.krnet.org
https://list.krnet.org/mailman/listinfo/krnet
Dang!!! I’m impressed.
No photo but I should have WunderBird in the air real soon😀
Mark Jones
Oldsmar, Fl
N771MJ “WunderBird”
www.flykr2s.com
flyk...@gmail.com
> On Jan 6, 2025, at 3:04 PM, tiekie bernardus via KRnet
> wrote:
>
>
> Hi Everybody.
> Hope this will do to all that had proble
Is there any information on this yet? Or did I just miss that post?
Mark Jones
Oldsmar, Fl
N771MJ “WunderBird”
www.flykr2s.com
flyk...@gmail.com
--
KRnet mailing list
KRnet@list.krnet.org
https://list.krnet.org/mailman/listinfo/krnet
Hi Adam.
Do you have wing tanks? Aluminum? Just a thought.
Mark Jones
Oldsmar, Fl
N771MJ “WunderBird”
www.flykr2s.com
flyk...@gmail.com
> On Oct 25, 2024, at 6:16 PM, Adam Deem via KRnet wrote:
>
> Yesterday while doing wind-up turns for testing, I heard a slight pop sound
> at exactly
The resolution is low so you may not be able to see the solar panel on the wing
tips and on top of the turtle deck.
Mark Jones
Oldsmar, Fl
N771MJ “WunderBird”
www.flykr2s.com
flyk...@gmail.com
> On Oct 15, 2024, at 9:21 PM, Mark Jones wrote:
>
> >
> Mark Jones
> Oldsmar, Fl
>
> N771MJ
Mark Jones
Oldsmar, Fl
N771MJ “WunderBird”
www.flykr2s.com
flyk...@gmail.com
--
KRnet mailing list
KRnet@list.krnet.org
https://list.krnet.org/mailman/listinfo/krnet
Who knows what method of painting Pete Brautigam used on that beautiful bird he
built.?
Mark Jones
Oldsmar, Fl
N771MJ “WunderBird”
www.flykr2s.com
flyk...@gmail.com
--
KRnet mailing list
KRnet@list.krnet.org
https://list.krnet.org/mailman/listinfo/krnet
19 DAYS
Are you going to be there? 🛩️
Mark Jones (WunderBird N771MJ) (Deer Slayer N886MJ)
Oldsmar, FL
flyk...@gmail.com
--
KRnet mailing list
KRnet@list.krnet.org
https://list.krnet.org/mailman/listinfo/krnet
25
Are you going to be there? 🛩️
Mark Jones (N771MJ)
Oldsmar, FL
flyk...@gmail.com
www.flykr2s.com
--
KRnet mailing list
KRnet@list.krnet.org
https://list.krnet.org/mailman/listinfo/krnet
Just booked the Drury. Easy peasy.
See you guys in 32 days!
Mark Jones (N771MJ)
Oldsmar, FL
flyk...@gmail.com
www.flykr2s.com
On Wed, Jul 24, 2024 at 6:31 PM Larry Flesner via KRnet <
krnet@list.krnet.org> wrote:
>
> On 7/24/2024 5:02 PM, Jeff Scott wrote:
> > The discount falls under SRT
Let’s reiterate on this. I have done both high speed taxi tests with wings on
and wings off. If you are doing this wings off, remember that the stub wings
create enough lift to pull you off the runway without ailerons. Be careful out
there.
Mark Jones
Oldsmar, Fl
N771MJ “WunderBird”
www.flyk
I am at that stage of high speed taxi testing. I thought I had my brakes
corrected from the insufficient performance during my first taxis. I went as
far as buying new Matco cylinders and installing those. Went for taxi test
yesterday and the brakes are still out of whack. I have determined the
I hate to say this but WunderBird will not make the gathering this year. She has not made her first flight yet. During taxi testing the brakes were insufficient and I just finished instilling a new system. Also, right now I have to install and remove the wings every time I fly it until I get a ful
67 days to go till the Gathering.
11 people registered to attend Really? Can't we do better than that?
Only 7 planes so far? And that is if I get WonderBird through the test
flight stage before the gathering.
Please get registered asap.
Mark Jones (N771MJ)
Oldsmar, FL
flyk...@gmail.com
www
As a follow up to my Lipo battery issue:
I installed an Odyssey agm PC680 yesterday and ran the engine almost an hour
with no issues.
Mark Jones
Oldsmar, Fl
N771MJ “WunderBird”
www.flykr2s.com
flyk...@gmail.com
--
KRnet mailing list
KRnet@list.krnet.org
https://list.krnet.org/mailman/listin
battery that shuts itself off, is not for me or my KR, electronic ignition or not .John Shaffer 455JS-From: "mark jones via KRnet" To: "KRnet"Cc: "mark jones"Sent: Wednesday June 12 2024 9:14:12AMSubject: KRnet> Lipo Bat
Yep, that's right. For you older guys like me you will remember these
emails from when we were first time builders. There ARE ONLY 91 days till
the Gathering.
Mark Jones (N771MJ)
Oldsmar, FL
flyk...@gmail.com
www.flykr2s.com
--
KRnet mailing list
KRnet@list.krnet.org
https://list.krnet.org/mai
Yesterday I was doing a taxi test and had the following happen more than
once. This scares me enough that I am now very hesitant to use a Lipo with
BMS.
After about five minutes of taxi, my engine shut off as if the ignition
switch had been shut off. There was absolutely no power at the ignition
sw
Mine are the 40108. The reason I’m asking is that one of the two has failed and I need to replace it. The testing phase after airworthiness certification has found this problem and also some brake issues so I’m installing new brake masters. Mark JonesOldsmar, FlN771MJ “WunderBird”www.flykr2s.comfl
Just curious guys, has anyone found better and quieter fuel pumps than the
Facet.
Mark Jones
Oldsmar, Fl
N771MJ “WunderBird”
www.flykr2s.com
flyk...@gmail.com
--
KRnet mailing list
KRnet@list.krnet.org
https://list.krnet.org/mailman/listinfo/krnet
Learn something every day.
Mark Jones
Oldsmar, Fl
N771MJ “WunderBird”
www.flykr2s.com
flyk...@gmail.com
> On May 15, 2024, at 5:05 PM, Larry Flesner via KRnet
> wrote:
>
>
>
>
> On 5/15/2024 3:26 PM, Mark Jones via KRnet wrote:
>> Some batteries are now
Some batteries are now coming with a built in BMS. Battery maintenance system.
Mine has one and I have already seen it work. It will not allow the battery to
discharge past a certain point. There is an internal cut off switch. I was
draining my battery by cranking the engine with fuel valve of
My KR2S became a real airplane today. She has her airworthiness certificate!!!
Mark Jones
Oldsmar, Fl
N771MJ “WunderBird”
www.flykr2s.com
flyk...@gmail.com
--
KRnet mailing list
KRnet@list.krnet.org
https://list.krnet.org/mailman/listinfo/krnet
Tomorrow is the big day for my airworthiness inspection on WunderBird. Here
she is sitting in the hangar waiting on the DAR.
Mark Jones (N771MJ)
Oldsmar, FL
flyk...@gmail.com
www.flykr2s.com
--
KRnet mailing list
KRnet@list.krnet.org
https://list.krnet.org/mailman/listinfo/krnet
For those following WunderBird, the airworthiness inspection has been
postponed.
A few issues popped up that I had to resolve which caused the delay.
I am requesting May 13th from the DAR. He has not confirmed yet.
Mark Jones (N771MJ)
Oldsmar, FL
flyk...@gmail.com
www.flykr2s.com
--
KRnet mailin
What a strange feeling with my plane gone from the garage. It’s the second
time I have experienced this feeling. Kind of like having a kid move out. Now
Karen can park her car back in the garage.
Mark Jones
Oldsmar, Fl
N771MJ “WunderBird”
www.flykr2s.com
flyk...@gmail.com
--
KRnet mailing
Good suggestion Larry. Thanks
Mark Jones
Oldsmar, Fl
N771MJ “WunderBird”
www.flykr2s.com
flyk...@gmail.com
> On Mar 15, 2024, at 11:47 AM, Larry Flesner via KRnet
> wrote:
>
>
>
>
> On 3/15/2024 10:28 AM, mark jones via KRnet wrote:
>> N771MJ is scheduled
N771MJ is scheduled for April 22 airworthiness inspection.
YeeeH
Mark Jones (N771MJ)
Oldsmar, FL
flyk...@gmail.com
www.flykr2s.com
--
KRnet mailing list
KRnet@list.krnet.org
https://list.krnet.org/mailman/listinfo/krnet
Hi Joe,
Those little demons are nasty little guys. On my first KR N886MJ, while I
was at 1,000 feet and 13 miles from the airport, the ground wire on my
pumps broke. Immediately I had no fuel pressure. Of course I did not find
the problem until I was back on the ground. What I did was open the
thro
Date: Sun, Feb 25, 2024 at 4:09 PM
Subject: Re: KRnet> play day
To: KRnet
Cc: Larry Flesner
I love the crab Zach drew.
Mark Jones
Oldsmar, Fl
N771MJ “WunderBird”
www.flykr2s.com
flyk...@gmail.com
> On Feb 25, 2024, at 3:59 PM, Larry Flesner via KRnet
wrote:
>
>
>
> Zach is out playing
Mark,
It’s not April Fools day so I have a gut feeling your wife is tried of you
being the airport all the time. That sound was her out side hitting two
pieces of metal together hoping you would give up and come home 😀
Mark Jones
Oldsmar, Fl
N771MJ “WunderBird”
www.flykr2s.com
flyk...@gmail.com
Mark,It’s not April Fools day so I have a gut feeling your wife is tried of you being the airport all the time. That sound was her out side hitting two pieces of metal together hoping you would give up and come home 😀Mark JonesOldsmar, FlN771MJ “WunderBird” www.flykr2s.comflyk...@gmail.comOn Feb 2
I love the crab Zach drew.
Mark Jones
Oldsmar, Fl
N771MJ “WunderBird”
www.flykr2s.com
flyk...@gmail.com
> On Feb 25, 2024, at 3:59 PM, Larry Flesner via KRnet
> wrote:
>
>
>
> Zach is out playing again today in his favorite toy. Can you guess what he
> added to his coloring book? Hi
Hey Guys,
WunderBird is almost ready for airworthiness inspection. Got that
YeeeHaaa feeling.
But I do have a question, how much do your aileron weights weigh? I know no
one's will be the same. Mine came in at 2lbs.
Thanks
Mark Jones (N771MJ)
Oldsmar, FL
flyk...@gmail.com
www.
Has the date been set for the 2024 Gathering?
Mark Jones (N771MJ)
Oldsmar, FL
flyk...@gmail.com
www.flykr2s.com
--
KRnet mailing list
KRnet@list.krnet.org
https://list.krnet.org/mailman/listinfo/krnet
Hi Guys,
Check out these plenums:
Mark Jones (N771MJ)
Oldsmar, FL
flyk...@gmail.com
www.flykr2s.com
--
KRnet mailing list
KRnet@list.krnet.org
https://list.krnet.org/mailman/listinfo/krnet
Check out these plenums. Mark JonesOldsmar, FlN771MJ “WunderBird”www.flykr2s.comflyk...@gmail.comOn Sep 20, 2023, at 12:13 AM, Zachary Martine via KRnet wrote:Does anyone know if there is any details that Robert had made about the aluminum plenums for his O-200? They seem like they'd be very eff
Hi guys,
Please send photos to all of us unlucky KR nuts that were not able to make
it this year.
Did N886MJ show up?
Thanks
Mark Jones (N771MJ)
Oldsmar, FL
flyk...@gmail.com
www.flykr2s.com
--
KRnet mailing list
KRnet@list.krnet.org
https://list.krnet.org/mailman/listinfo/krnet
So sorry I could not make it this year.
Please send photos of the planes.
Thanks
Mark Jones
Oldsmar, Fl
N771MJ “WunderBird”
www.flykr2s.com
flyk...@gmail.com
> On Sep 16, 2023, at 8:40 AM, Jeff Scott via KRnet
> wrote:
>
>
> Well kids, If you are sitting at home today, you're missing
I too am in the market for insurance. Global , even with my flight experience in a KR and never had an issue in 560 KR hours, quoted me a whopping $895 year just for liability. On my first KR, I only paid $300 year for liability coverage with Falcon. I’m waiting to hear back from them on a quote. M
Question:
Does anyone know of a way to use an existing KT-76A transponder as an ABS-B
OUT system?
Mark Jones (N771MJ)
Oldsmar, FL
flyk...@gmail.com
www.flykr2s.com
--
KRnet mailing list
KRnet@list.krnet.org
https://list.krnet.org/mailman/listinfo/krnet
Last night we completed the aileron installation on both wings. WunderBird
could actually fly now except for a set back we discovered this morning.
The right wing aileron is warped. WTF! How did this happen? No idea! The left
aileron came out perfect. Now we have to fabricate a new aileron. Th
In case anyone needs a Great Plains engine zero time since overhaul, here
is a link:
https://tampa.craigslist.org/hil/avo/d/tallahassee-aircraft-engine/7585279602.html#
Mark Jones (N771MJ)
Oldsmar, FL
flyk...@gmail.com
www.flykr2s.com
--
KRnet mailing list
KRnet@list.krnet.org
https://list.krnet
Yes I agree with Larry. After sleeping on the comments I made concerning my
door lifting up, the pins were still inside the canopy frame. They actually
slid up the frame and that is what kept it from opening any farther.
Possibly just enough pressure on the pins and frame to stop it. Yes, I was
luc
was
lucky.
Mark Jones
Oldsmar, Fl
N771MJ “WunderBird”
www.flykr2s.com
flyk...@gmail.com
> On Jan 25, 2023, at 8:04 PM, Flesner via KRnet wrote:
>
> On 1/25/2023 6:44 PM, mark jones via KRnet wrote:
>> Gull Wing apparently does not generate enough lift to rip i
Hi guys.
I too like Larry built a gull wing door just for the safety aspect and I am
sure glad I did. On my very first flight, it raised up about 1” and did not
go any further. I had a latch system that simply did not work the way I had
it. The lift from the gull wing showed me that at about 1000 f
Hi guys. I too like Larry built a gull wing door just for the safety aspect and I am sure glad I did. On my very first flight, it raised up about 1” and did not go any further. I had a latch system that simply did not work the way I had it. The lift from the gull wing showed me that at about 1000 f
Typo……lol
Mark Jones
Oldsmar, Fl
N771MJ “WunderBird”
www.flykr2s.com
flyk...@gmail.com
> On Dec 14, 2022, at 5:50 PM, Phillip Matheson via KRnet
> wrote:
>
> Wow 14,000 rpm. That’s some engine LOL 🤣
> Phil.
>
> Sent from my iPhone
>
>> On 15 Dec 2022,
When I dropped a valve seat I had just left the KR Gathering and I was at
10,000’ and 13 miles from the nearest airport which happened to be Metropolis,
Illinois. I heard Superman lives there! Anyway, the engine kept running but
would only produce about 14,000 RPM. It would not hold altitude but
Actually they are Grove gear. Mark JonesOldsmar, FlN771MJ “WunderBird”www.flykr2s.comflyk...@gmail.comOn Dec 1, 2022, at 11:35 AM, Mark Langford wrote:
Craig Williams wrote:
>Take a look at the gear Mark put on WunderBird. If I wasdoing it agail I would look at that setup<
Does aviation brake fluid have a long shelf life? I have some that must be
at least ten years old. Is it safe to use?
Mark Jones (N771MJ)
Oldsmar, FL
flyk...@gmail.com
www.flykr2s.com
--
KRnet mailing list
KRnet@list.krnet.org
https://list.krnet.org/mailman/listinfo/krnet
>
> On Wed, Oct 26, 2022 at 1:59 PM mark jones via KRnet
> wrote:
>
>> Hello everyone,
>> Just a quick update.
>> Not a day goes by that something is not done to WunderBird. Heck, it may
>> just be wiping all the sanding dust off or doing a fiberglass lay
MKVN = Mt Vernon, IL
Mark Jones (N771MJ)
Oldsmar, FL
flyk...@gmail.com
www.flykr2s.com
On Wed, Oct 26, 2022 at 1:59 PM mark jones via KRnet
wrote:
> Hello everyone,
> Just a quick update.
> Not a day goes by that something is not done to WunderBird. Heck, it may
> just be wi
Hello everyone,
Just a quick update.
Not a day goes by that something is not done to WunderBird. Heck, it may
just be wiping all the sanding dust off or doing a fiberglass lay up.
Thanks to Bernie Wunder for giving me the opportunity to complete the KR2S
which he started. He saved me at least two y
Yes please let’s keep it a separate event.
Mark Jones
Oldsmar, Fl
N771MJ “WunderBird”
www.flykr2s.com
flyk...@gmail.com
> On Sep 19, 2022, at 11:18 AM, Luis Claudio via KRnet
> wrote:
>
>
> I second what Rob said. One look at the flight line and I felt that our event
> was watered down
Maybe I just didn't see it but has anyone announced when and where the 2023
gathering will be?
Mark Jones (N771MJ)
Oldsmar, FL
flyk...@gmail.com
www.flykr2s.com
--
KRnet mailing list
KRnet@list.krnet.org
https://list.krnet.org/mailman/listinfo/krnet
632 Lake Cypress Cir
Oldsmar, Florida 34677
Thanks Larry. Let me know how much to send you.
Thanks
Mark Jones
Oldsmar, Fl
N771MJ “WunderBird”
www.flykr2s.com
flyk...@gmail.com
> On Sep 14, 2022, at 7:36 PM, Flesner via KRnet wrote:
>
>
> Mark Jones, shoot me your mailing address. fles
Building the KR actually kept me married. Sure, my wife would sometimes get
frustrated with me always working on it but I would come back with “yea, it may
be so but it keeps me at home and out of the bars”. Trust me I know! That’s how
I lost my first wife! Now I am nearing completion on my
easily kept altitude to make it back. The
engine ran just shy of 2K rpm.
Mark Jones
Oldsmar, Fl
N771MJ “WunderBird”
www.flykr2s.com
flyk...@gmail.com
> On Jul 22, 2022, at 1:52 PM, Flesner via KRnet wrote:
>
> On 7/22/2022 12:01 PM, mark jones via KRnet wrote:
>> I used welded
via KRnet wrote:
>>> On 7/22/2022 12:01 PM, mark jones via KRnet wrote:
>>> I used welded aluminum tanks in each wing. Twelve gallons each side.
>>> Mark Jones (N771MJ)
>>
>> +++
>>
>> Do y
?
>
> Joe.
>
> -----
> From: "mark jones via KRnet"
> To: "KRnet"
> Cc: "mark jones"
> Sent: Friday July 22 2022 10:19:47AM
> Subject: KRnet> N771MJ
>
> I mailed in the registration for N771MJ a week ago and the FAA has already
> a
I mailed in the registration for N771MJ a week ago and the FAA has already
assigned the registration and it became valid yesterday the 21st. The FAA
now says it is a real airplane. Completion and airworthiness expected this
fall to winter.
Mark Jones (N771MJ)
Oldsmar, FL
flyk...@gmail.com
www.fly
Ground effect on take off roll between horizontal stabilizer and the ground.
Mark Jones
Oldsmar, Fl
N771MJ “WunderBird”
www.flykr2s.com
flyk...@gmail.com
> On Jul 19, 2022, at 9:38 AM, Flesner via KRnet wrote:
>
>
>> On 7/19/2022 1:57 AM, MS wrote:
>>
>> > "As should be known, a KR is m
get parts to overhaul?
>
> Joe
> ---------
>
> From: "mark jones via KRnet"
> To: "KRnet"
> Cc: "mark jones"
> Sent: Friday July 15 2022 10:27:24AM
> Subject: KRnet> Ellison EFS-2
>
> Just seen this
Just seen this on craigslist if anyone needs an EFS-2
https://fortmyers.craigslist.org/chl/avo/d/punta-gorda-ellison-throttle-body/7505520537.html
Mark Jones (N771MJ)
Oldsmar, FL
flyk...@gmail.com
www.flykr2s.com
--
KRnet mailing list
KRnet@list.krnet.org
https://list.krnet.org/mailman/listinf
Quit bragging.
“almost all of my weight (all 135 pounds of it) “
>
> Mark Langford
> m...@n56ml.com
> http://www.n56ml.com
> Huntsville, AL
>
> --
> KRnet mailing list
> KRnet@list.krnet.org
> https://list.krnet.org/mailman/listinfo/krnet
--
KRnet mailing list
KRnet@list.krnet.org
https://list
I am in need of a prop 54x54 or close for my Corvair. Any out there for
sale?
Thanks
Mark Jones (N771MJ)
Oldsmar, FL
flyk...@gmail.com
www.flykr2s.com
___
Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/.
Please see LIST
Mark Jones
Oldsmar, Fl
N771MJ “WunderBird”
www.flykr2s.com
flyk...@gmail.com
> On Feb 9, 2021, at 10:18 AM, Daniel Heath via KRnet
> wrote:
>
> Not working, no pic.
>
>
> Daniel R. Heath - Lexington, SC
>
> -Original Message-
> From: KRnet On
Just had a visit from two awesome folks. Bernie and Dee Wunder. I am attempting
to post a photo of Bernie sitting in WunderBird.
Mark Jones
Oldsmar, Fl
N771MJ “WunderBird”
www.flykr2s.com
flyk...@gmail.com
___
Search the KRnet Archives at https://w
Also, I forgot to mention that I got the Trymer 2000xp for FREE. I found a
manufacturer that uses it in their products. They usually have a cut off pile
of scrap Trymer and just might give it to you.
I was able to get pieces that were about a foot thick which made excellent wing
tips.
Mark Jo
Hi all,
I used Trymer 2000xp on my first build (N886MJ) to do the wing tips and in a
few other areas. I had absolutely no reservations with this foam. It works
easily just as the KR Foam. If I had located the Trymer prior to foaming the
rest of the plane, I would have used it for everything. Plu
Awesome news Pete. Congrats.
Mark Jones
Oldsmar, Fl
N771MJ “WunderBird”
www.flykr2s.com
flyk...@gmail.com
___
Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/.
Please see LIST RULES and KRnet info at http://www.krnet.
Hi all,
I am almost ready to start my Corvair engine
for the first time. Does anyone have a prop for sale that is in the 54x54
range. Or does anyone have a prop SAE 1 that I could borrow to do the static
test runs?
Thank guys,
Mark Jones
Oldsmar, Fl
N771MJ “WunderBird”
www.flykr2s.com
flyk..
Hogwash
Mark Jones
Oldsmar, Fl
N771MJ “WunderBird”
www.flykr2s.com
flyk...@gmail.com
___
Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/.
Please see LIST RULES and KRnet info at http://www.krnet.org/info.html.
see
Wow. Straighten that out and you could be enjoying yourself down here in
Florida.
Mark Jones
Oldsmar, Fl
N771MJ “WunderBird”
www.flykr2s.com
flyk...@gmail.com
> On Aug 23, 2020, at 4:43 PM, Mark Langford via KRnet
> wrote:
>
> KRNetHeads,
>
> Last week I got a little crazy for some KR
Easy Peasy.
Mark Jones
Oldsmar, Fl
N771MJ “WunderBird”
www.flykr2s.com
flyk...@gmail.com
> On Aug 8, 2020, at 5:56 PM, Flesner via KRnet wrote:
>
> On 8/8/2020 4:30 PM, Daniel Heath via KRnet wrote:
>> This is my "green glass" method of making wing gap covers.
>
> +++
WonderBird will be there !!!
Mark Jones
Oldsmar, Fl
N771MJ “WunderBird”
www.flykr2s.com
flyk...@gmail.com
>
>
>> The 50th anniversary of the KR design happens in 2022, just 2 years from
>> now. The EAA celebrates anniversary's of aircraft designs at
>> Airventure. I suspect it will be mem
Kens original is/was in the FAA building at Oshkosh on display.
Mark Jones
Oldsmar, Fl
N771MJ “WunderBird”
www.flykr2s.com
flyk...@gmail.com
> On Jul 8, 2020, at 9:18 AM, Flesner via KRnet wrote:
>
> On 7/7/2020 4:22 PM, Flesner via KRnet wrote:
>> “The fact that Ken Rand and Stu Robinson
Yours don’t
Mark Jones
Oldsmar, Fl
N771MJ “WunderBird”
www.flykr2s.com
flyk...@gmail.com
> On Jun 5, 2020, at 4:30 PM, Randall Smith via KRnet
> wrote:
>
> Every post that I looked at here has a name.
>
> Sent from my iPhone
>
>> On Jun 5, 2020, at 12:33 PM, n357cj via KRnet wrote:
>>
Who should we congratulate ?? There is no signature. I wish the moderator could
block any email without a signature.
Mark Jones
Oldsmar, Fl
N771MJ “WunderBird”
www.flykr2s.com
flyk...@gmail.com
> On Jun 5, 2020, at 3:48 PM, Flesner via KRnet wrote:
>
> On 6/5/2020 2:17 PM, leeshook--- vi
As a follow up to my method of mounting And adjusting my trim tab:
The double sided 3M tape I used is their 444 tape. To adjust the angle of my
trim tab, it could simply be removed by using dental floss under the edge of
the tab and floss it right off the aileron. However, I didn’t remove mine
Hi Guys.
I too had this style trim tab on my aileron. The way I mounted mine was with 3M
double sided tape and I put over 500 hours flight time on it and it never
loosened up. Mounting it this way is just another way to reduce a little drag.
Also mounted my Mylar aileron gap seals with this t
ustralia
>
> Sent from my iPhone
>
>> On 10 May 2020, at 10:29 pm, Mark Jones via KRnet
>> wrote:
>>
>> For the life of me I can not understand why people post on our Net and
>> continue not to sign your post so we know who we are hearing from. You don’t
For the life of me I can not understand why people post on our Net and continue
not to sign your post so we know who we are hearing from. You don’t have to
reveal any personal info about you but at least a name would be nice if it is
just a first name. Besides it is just plain courteous to do so
I love the KR Net and reading all the post.
Mark Jones
Oldsmar, Fl
N771MJ “WunderBird”
www.flykr2s.com
flyk...@gmail.com
___
Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/.
Please see LIST RULES and KRnet info at ht
Hey Craig.
I never saw the first email I sent out on this which had a photo attached and
explained the ports. Anyway the bottom port is out and the top port is in.
Mark Jones
“Wunderbird N771MJ”
www.flykr2s.com
flyk...@gmail.com
> On Apr 29, 2020, at 12:11 PM, Craig Williams wrote:
>
> I'll
Excellent write up on this on my web site.
Mark Jones
“Wunderbird N771MJ”
www.flykr2s.com
flyk...@gmail.com
> On Apr 29, 2020, at 9:49 AM, Craig Williams via KRnet
> wrote:
>
> I had this figured out at one time but old age and CRS syndrom has struck
> again. On the side of the case were t
The oil flows out the lower port and into the top port.
Mark Jones
“Wunderbird N771MJ”
www.flykr2s.com
flyk...@gmail.com
> On Apr 29, 2020, at 9:49 AM, Craig Williams via KRnet
> wrote:
>
> I had this figured out at one time but old age and CRS syndrom has struck
> again. On the side of t
Hello all.
I am looking for a prop for my Corvair engine. If anyone has one for sale
please email me at flyk...@gmail.com and I will consider what you have. A 56x54
would be just about perfect.
Thanks
Mark Jones
“Wunderbird N771MJ”
www.flykr2s.com
flyk...@gmail.com
___
Another set back !!!
I have been doing a lot of body work and was almost done until I got down on
the floor and spotted this on my fuselage bottom which I thought was a finished
bottom ready for paint.
When I began my filling and sanding on the bottom I chose to use a marine
filler which was l
Hi Mike,
Thanks for the kind words. The seat backs actually raise up allowing access
to storage. They are hinged on the top of thew seat back. BTW i just found
your email in my spam for some reason so I made sure you will not go in
there any more..
Stay safe and healthy my frien.
Mark Jones (N771
Hello all... I hope this finds you all well and healthy. I have been
getting a lot done on WunderBird and have posted a few pictures for ya'll.
Follow this link and scroll to the bottom of the page.
http://flykr2s.com/WunderBird.html
Mark Jones
Oldsmar, FL
WunderBird N771MJ
flyk...@gmail.com
www
1 - 100 of 250 matches
Mail list logo
