Easy Peasy. Mark Jones Oldsmar, Fl
N771MJ “WunderBird” www.flykr2s.com flyk...@gmail.com > On Aug 8, 2020, at 5:56 PM, Flesner via KRnet <krnet@list.krnet.org> wrote: > > On 8/8/2020 4:30 PM, Daniel Heath via KRnet wrote: >> This is my "green glass" method of making wing gap covers. > > +++++++++++++++++++++++++++++++++++++++++++++++++++++++ > > If you foam and glass the gap, then cut with a fine saw blade, you could > easily cover the 1/16" or less gap with white electrical tape. That only > leaves the larger hole at the wing attach fittings, top and bottom. Make a > small cover for that area, top and bottom, attach some type of hold down to > the bottom side of the top wing cover and extend it down and through the > bottom cover to secure both. Some builders just glass the entire gap shut > and don't worry about it again until they have to remove the wings. Right > Mark? > > Larry Flesner > > > _______________________________________________ > Search the KRnet Archives at > https://www.mail-archive.com/krnet@list.krnet.org/. > Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options. > To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
