Most of the gaskets between the mag and case that I have used do not have a
slot in them, just a hole. if the gasket is stuck to the mag it will not let
the mag rotate. Just a thought. Jim
-Original Message-
From: Jeff Scott via KRnet
To: krnet
Cc: Jeff Scott
Sent: Wed, Jun 20,
Sent: Wednesday, June 20, 2018 at 9:27 PM
From: "Robert K. Pesak via KRnet"
To: KRnet
Cc: rkp...@att.net
Subject: KR> Bendix magneto timing
I checked the timing on my O200 this afternoon. The first thing I noticed was,
one impulse coupler clicked before the other. Checking the timing with
Stef
Could you please post a picture of your finished firewall? I am getting ready
to do that also and would like to see how it looks.Thanks and best of luck
Luis R Claudio, KR2S, Dallas, Texas
On Wednesday, June 20, 2018 01:17:18 PM CDT, Stef den Boer
via KRnet wrote:
I checked the timing on my O200 this afternoon. The first thing I noticed was,
one impulse coupler clicked before the other. Checking the timing with timing
light left mag was right on 24 degrees BTDC and left mag was 12 degrees BTDC.
So I loosened top and bottom on the magneto base but couldn
KR Guys
When I converted my plane from retract to fixed gear. I set the axle the
same distance from the spar as the retracts were. Which is around 4" in
front of the face of the front spar. Now I am seeing here that this
distance seems to all over the place. Up to 10". My plane has a 20"
s
All,
Thanks for the informormation.
Installed today the steel with the fibrefrax on the fuselage. Left a gap with
approx 3 mm on the side around, I will seal this later with the red RTV.
Stef
> Op 19 juni 2018 om 19:47 schreef Rob Schmitt :
>
>
> Stef,
>
> I used 3M super 77 spray adhesive. G
6 matches
Mail list logo
