All, Thanks for the informormation. Installed today the steel with the fibrefrax on the fuselage. Left a gap with approx 3 mm on the side around, I will seal this later with the red RTV. Stef
> Op 19 juni 2018 om 19:47 schreef Rob Schmitt <robert7...@aol.com>: > > > Stef, > > I used 3M super 77 spray adhesive. Glued to the wood side only. > > Thanks, > > Rob Schmitt > N1852Z > > > > > -----Original Message----- > From: KRnet <krnet-boun...@list.krnet.org> On Behalf Of Stef den Boer via > KRnet > Sent: Tuesday, June 19, 2018 12:18 AM > To: krnet <krnet@list.krnet.org> > Cc: Stef den Boer <stefk...@ziggo.nl> > Subject: KR> Gleuing fibre frax > > Hi all, > > > Almost finished the steelen fire wall and ready to install it with the fibre > frax. > > I want to gleu the fibrefrax with red RTV 106, do I need to gleu the fibre > frax to the firewall only at the wooden side, or to the woodenside and also > to the steel side....or only to the steel side. > > How did you do it? > > Thanks Stef > > > Steph and his dad are building the KR-2S see > http://www.masttotaalconcept.nl/kr2 http://www.masttotaalconcept.nl/kr2 > _______________________________________________ > Search the KRnet Archives at > https://www.mail-archive.com/krnet@list.krnet.org/. > Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options. > To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org > Steph and his dad are building the KR-2S see http://www.masttotaalconcept.nl/kr2 _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
