On Tuesday 14 June 2011, meino.cra...@gmx.de wrote:
> Why are the versions oscillate that way?
Did you add loop-aes globally in /etc/make.conf, or per package in
/etc/portage/package.use?
In the latter case did you specify the packet version?
Can you see why I'm asking these questions?
Cheers
On Wednesday 15 Jun 2011 01:09:28 Dmitry Makovey wrote:
> On 06/14/2011 12:09 AM, Mick wrote:
> > The last enews I read specifically warned *not* to turn on 3.1 and
> > instead
> > stay with the latest 2 version ...
> >
> > Do you have a specific reason that compels you to try to make KDE work
> >
On 06/14/2011 12:09 AM, Mick wrote:
> The last enews I read specifically warned *not* to turn on 3.1 and
> instead
> stay with the latest 2 version ...
>
> Do you have a specific reason that compels you to try to make KDE work with
> 3.1?
If memory serves me right it was on this list that I picked
Has anyone been able to set up TTS in KDE 4.6.3?
I've tried again and again but I am still unable to get any "Talkers" to
show up. I zapped kttsd and now am using jovie but, alas, no joy from
jovie am I receiving.
Maybe I don't see something basic, but I don't see what it is. I've
gotten this to
on 06/15/2011 12:57 AM Thanasis wrote the following:
> on 06/15/2011 12:33 AM Cahn Roger wrote the following:
>>> Can you ping 192.168.1.1 from another machine?
>>
>> Yes, from my laptop with which I'm writing
>>
>> Portable cahn # ping 192.168.1.1
>> PING 192.168.1.1 (192.168.1.1) 56(84) bytes of
on 06/15/2011 01:31 AM Thanasis wrote the following:
> on 06/15/2011 01:24 AM Mick wrote the following:
>> On Tuesday 14 Jun 2011 23:01:09 Thanasis wrote:
>>> on 06/15/2011 12:47 AM Mick wrote the following:
>>> snip
>>>
You need to remove those lines that I asked you to type on the command
>>
on 06/15/2011 01:24 AM Mick wrote the following:
> On Tuesday 14 Jun 2011 23:01:09 Thanasis wrote:
>> on 06/15/2011 12:47 AM Mick wrote the following:
>> snip
>>
>>> You need to remove those lines that I asked you to type on the command
>>> line from the /etc/conf.d/net
>>
>> He should have already
On Tuesday 14 Jun 2011 23:01:09 Thanasis wrote:
> on 06/15/2011 12:47 AM Mick wrote the following:
> snip
>
> > You need to remove those lines that I asked you to type on the command
> > line from the /etc/conf.d/net
>
> He should have already removed them (see the messages in the thread).
> /etc
* Mick [110614 17:20]:
> On Tuesday 14 Jun 2011 20:45:30 Cahn Roger wrote:
> > > # /etc/init.d/net.eth0 stop
> > > # ifconfig eth0 192.168.1.20 up
> > >
> > > and post output of
> >
> > /etc/init.d/net.eth0 stop
> > * Caching service dependencies ...
> > /etc/init.d/../conf.d/net: line 9: broad
on 06/15/2011 12:47 AM Mick wrote the following:
snip
>
> You need to remove those lines that I asked you to type on the command line
> from the /etc/conf.d/net
He should have already removed them (see the messages in the thread).
/etc/conf.d/net should be empty by now, which means it defaults
on 06/15/2011 12:33 AM Cahn Roger wrote the following:
>> Can you ping 192.168.1.1 from another machine?
>
> Yes, from my laptop with which I'm writing
>
> Portable cahn # ping 192.168.1.1
> PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
> 64 bytes from 192.168.1.1: icmp_req=1 ttl=64 time=3
On Tuesday 14 Jun 2011 20:51:42 walt wrote:
> On 06/14/2011 09:02 AM, fajfu...@wp.pl wrote:
> > Hello
> >
> > When I execute:
> > setxkbmap pl
> >
> > I can type polish fonts in xterm and other X programs. But when I
> > generate xorg.conf file with "Xorg -configure" and add the following to
> >
on 06/15/2011 12:33 AM Cahn Roger wrote the following:
>> Can you ping 192.168.1.1 from another machine?
>
> Yes, from my laptop with which I'm writing
>
> Portable cahn # ping 192.168.1.1
> PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
> 64 bytes from 192.168.1.1: icmp_req=1 ttl=64 time=3
On Tuesday 14 Jun 2011 20:45:30 Cahn Roger wrote:
> > # /etc/init.d/net.eth0 stop
> > # ifconfig eth0 192.168.1.20 up
> >
> > and post output of
>
> /etc/init.d/net.eth0 stop
> * Caching service dependencies ...
> /etc/init.d/../conf.d/net: line 9: broadcast : commande introuvable
> /etc/init.d/
On Tuesday 14 Jun 2011 18:44:43 Cahn Roger wrote:
> >>> Try setting an address manually:
> >>> ifconfig eth0 192.168.1.20 broadcast 192.168.1.255 netmask
> >>> 255.255.255.0
> >>>
> >>> route add default gw 192.168.1.1 (assuming that this is your router)
>
> It doesn't work: error locating ho
> Can you ping 192.168.1.1 from another machine?
Yes, from my laptop with which I'm writing
Portable cahn # ping 192.168.1.1
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
64 bytes from 192.168.1.1: icmp_req=1 ttl=64 time=3.86 ms
64 bytes from 192.168.1.1: icmp_req=2 ttl=64 time=3.86 ms
64
on 06/14/2011 11:36 PM Cahn Roger wrote the following:
> Bureau cahn # ping 192.168.1.1
> PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
>>From 192.168.1.20 icmp_seq=2 Destination Host Unreachable
>>From 192.168.1.20 icmp_seq=3 Destination Host Unreachable
>>From 192.168.1.20 icmp_seq=4 Dest
> Run these (in sequence) as root (and post output):
>
> # echo > /etc/conf.d/net
> # /etc/init.d/net.eth0 stop
> # /etc/init.d/net.eth0 zap
> # ifconfig eth0 192.168.1.20 up
> # ifconfig
> # ping 192.168.1.1
Bad luck: it fails.
Bureau cahn # echo > /etc/conf.d/net
Bureau cahn # /etc/init.d/net.
on 06/14/2011 10:45 PM Cahn Roger wrote the following:
>> # /etc/init.d/net.eth0 stop
>> # ifconfig eth0 192.168.1.20 up
>>
>> and post output of
>
> /etc/init.d/net.eth0 stop
> * Caching service dependencies ...
> /etc/init.d/../conf.d/net: line 9: broadcast : commande introuvable
> /etc/init.d/
On 06/14/2011 09:02 AM, fajfu...@wp.pl wrote:
> Hello
>
> When I execute:
> setxkbmap pl
>
> I can type polish fonts in xterm and other X programs. But when I generate
> xorg.conf file with "Xorg -configure" and add the following to it I cannot
> type the polish fonts (I copied it to /etc/x11/x
> # /etc/init.d/net.eth0 stop
> # ifconfig eth0 192.168.1.20 up
>
> and post output of
/etc/init.d/net.eth0 stop
* Caching service dependencies ...
/etc/init.d/../conf.d/net: line 9: broadcast : commande introuvable
/etc/init.d/../conf.d/net: line 10: netmask : commande introuvable
SIOCADDRT: Le
>>> Try setting an address manually:
>>>
>>> ifconfig eth0 192.168.1.20 broadcast 192.168.1.255 netmask 255.255.255.0
>>>
>>> route add default gw 192.168.1.1 (assuming that this is your router)
It doesn't work: error locating host target (for route)
Regards
Roger
Am Dienstag, 14. Juni 2011, 08:09:57 schrieb Mick:
> >
> > should I be performing some other waving in the air to make this whole
> > thing fly? It seems like a bug to me, but I'd rather confirm I'm not
> > missing something before reporting it.
>
> The last enews I read specifically warned *not
On Tue, 14 Jun 2011, meino.cra...@gmx.de wrote:
Hi,
When the story begins I had installed util-linux-2.18-r1.
Then emerge told me, that it wants to downgrade to util-linux-2.12,
because I hade set USE=loop-aes for that.
Util-linux-2.19.something was on the road too...
After some inverstigation
On 06/14/11 11:46, meino.cra...@gmx.de wrote:
> What is the difference of
> USE=loop-aes
> and
> USE=crypt?
>
> Why are the versions oscillate that way?
>
> HELP ! :)
>
> Thank you very much for any hint in advance!:)
Maybe helpful:
http://dev.c1pher.net/index.php/2011/06/loop-aes-should-i
>> Try setting an address manually:
>>
>> ifconfig eth0 192.168.1.20 broadcast 192.168.1.255 netmask 255.255.255.0
>>
>> route add default gw 192.168.1.1 (assuming that this is your router)
>
> I put this in /etc/conf.d/net; is it right?
No. Run them from terminal as root.
Then check.
> Your DHCP server serves addresses for other hardware OK?
Yes. A PC with W7, my laptop with XP and Gentoo
Both work fine.
The problem is on my desktop with two HD: XP and Gentoo
Both OS can't connect to Internet.
> When you say fixed addresses you mean the DHCP server gives out a
> fixed IP add
> It depends on your router. Usually routers have at least a GUI control panel
> access and one of the pages shows recent attempts to connect and authenticate.
My router hasn't this!
> Are your running some sort of an access control list on the router and have
> not included your MAC address?
Dnia 27-05-2011 o godz. 17:27 Sebastian Beßler napisał(a):
> Am 27.05.2011 17:09, schrieb fajfu...@wp.pl:
>
> > I found that "hal" has been unmerged during an upgrade. I installed it
> again
> > and launching it at startup.
>
> HAL was removed for a reason, it is not longer used by xserver.
> Yo
Hello
When I execute:
setxkbmap pl
I can type polish fonts in xterm and other X programs. But when I generate
xorg.conf file with "Xorg -configure" and add the following to it I cannot type
the polish fonts (I copied it to /etc/x11/xorg.conf)
Section "InputDevice"
Identifier "Keyboard
On Tuesday 14 Jun 2011 15:42:52 Cahn Roger wrote:
> Hi Mick,
>
> > What does the router log show?
>
> Euh, how can I get it???
It depends on your router. Usually routers have at least a GUI control panel
access and one of the pages shows recent attempts to connect and authenticate.
Are your r
on 06/14/2011 06:50 PM Dale wrote the following:
> I updated to 2.6.39 and was getting random reboots and lock ups. I went
> back to 2.6.38 myself. I think I'll wait until a little later kernel
> before I upgrade.
>
Try 2.6.39-r1 ?
* Cahn Roger [110614 09:31]:
> Le 14/06/2011 15:15, Todd Goodman a écrit :
>
> Hi Todd,
Hi Roger,
>
> Thank you for your quick answer.
You're welcome (for what it's worth.)
>
> > It looks like your DHCP server isn't serving addresses.
>
> Well, it serves adresses for W7, and on the laptop
Indi wrote:
On Tue, Jun 14, 2011 at 07:18:02AM +, JDM wrote:
Have only tried CONFIG_HID_ROCCAT but this did not help. Will give the others a
go.
Not quite sure why older kernels would recognise keyboard but .39 kernel does
not and .38 I have issues with when plugging in usb stick. Are
Hi,
When the story begins I had installed util-linux-2.18-r1.
Then emerge told me, that it wants to downgrade to util-linux-2.12,
because I hade set USE=loop-aes for that.
Util-linux-2.19.something was on the road too...
After some inverstigation I thought USE=crypt had replced
USE=loop-aes, I rem
on 06/14/2011 05:45 PM Cahn Roger wrote the following:
>> Can you check the network cable and connections to ensure that is actually
>> correct?
>
> The cable and connections are well.
NIC became faulty?
> Can you check the network cable and connections to ensure that is actually
> correct?
The cable and connections are well.
Thank you Joost
Roger
Hi Mick,
> What does the router log show?
Euh, how can I get it???
> Can you please share:
> ifconfig eth0
ifconfig eth0
eth0Lien encap:Ethernet HWaddr 00:1e:8c:4a:44:db
inet adr:169.254.79.43 Bcast:169.254.255.255 Masque:255.255.0.0
adr inet6: fe80::21e:8cff:fe4a:4
Le 14/06/2011 15:15, Todd Goodman a écrit :
Hi Todd,
Thank you for your quick answer.
> It looks like your DHCP server isn't serving addresses.
Well, it serves adresses for W7, and on the laptop for XP and Gentoo.
The box is configured with fixed adresses.
> If it's your Internet router you mi
On Tuesday 14 Jun 2011 14:32:22 Cahn Roger wrote:
> Hi,
>
> Yesterday I tried to make a connection between my three PC
> to manage my Epson printer: two with Win XP and Gentoo
> and one with Win7.
> I didn't succeed, but that's not important!
> After reboot of the three machines
> I went back to W
On Tuesday 14 June 2011 15:32:22 Cahn Roger wrote:
> Hi,
>
> But the problem is on my desktop with two HD,
> one with XP and the other with Gentoo amd64.
> None of them can connect to internet neither gentoo nor XP.
> I tryed many things (revdep-rebuild, verification in the box, etc.)
> but I wa
* Cahn Roger [110614 09:05]:
> Hi,
>
[..]
> * Bringing up interface eth0
> * dhcp ...
> * Running dhcpcd ...
> dhcpcd[3076]: version 5.2.12 starting
> dhcpcd[3076]: eth0: waiting for carrier
> dhcpcd[3076]: eth0: carrier acquired
> dhcpcd[3076]: eth0: rebinding lease of 192.168.1.20
> dh
Hi,
Yesterday I tried to make a connection between my three PC
to manage my Epson printer: two with Win XP and Gentoo
and one with Win7.
I didn't succeed, but that's not important!
After reboot of the three machines
I went back to Win7: no problem
and to my laptop with Xp and Gentoo: OK.
But the
On Tue, Jun 14, 2011 at 07:18:02AM +, JDM wrote:
> Have only tried CONFIG_HID_ROCCAT but this did not help. Will give the others
> a go.
>
> Not quite sure why older kernels would recognise keyboard but .39 kernel does
> not and .38 I have issues with when plugging in usb stick. Are the kern
Have only tried CONFIG_HID_ROCCAT but this did not help. Will give the others a
go.
Not quite sure why older kernels would recognise keyboard but .39 kernel does
not and .38 I have issues with when plugging in usb stick. Are the kernel guys
trying to make the hardware support more specific? Or
on 06/14/2011 08:38 AM john wrote the following:
snip
> Will try studying all options in kernel to see if I can cure this.
> There are roccat options but these are for macros and don't help. But
> there maybe more other subtle ones available.
>
> Regards
>
> Thanks for your help
Have you enabled
46 matches
Mail list logo
