On Fri, 14 Jan 2005, Rick Updegrove wrote:
> Rick Updegrove wrote:
>
> When I finally got 5.3-STABLE built after several mysterious failed
> attempts the machine basically runs fine until...
>
> I try to "Ctrl + Alt + F1" (or any of the F keys) that will now
> consistently locks up the machine.
>
I tried reproducing the problem on both i386 and amd64,
but could not. I installed 5.3 RELEASE, cvsuped to the
tip of RELENG_5, re-built the kernel with twa integrated,
and rebooted. The test systems booted just fine (off of
3ware controlled da0). I even tried replacing just the
twa sources of
Eirik Øverby wrote:
Hi!
Daring as I am, here's another attempt at having someone look into the
asr driver and why it doesn't work on amd64.
I have such a Zero-Channel RAID card laying around collecting dust,
whereas it was planned installed in a server here long time ago.
I know Scott Long looked i
Tony Byrne wrote:
Hello Doug,
Friday, January 14, 2005, 1:35:16 AM, you wrote:
DW> scottl has been able to reproduce this on a U320 controller he has. I only
DW> have U160 equipment and can't get the txn rate up high enough to reproduce
DW> the issue. The driver needs KTR instrumentation so we can
On Fri, 14 Jan 2005, Christian Weisgerber wrote:
Tod McQuillin:
Add
options CPU_ENABLE_SSE
to your kernel config and rebuild the kernel.
But CPU_ENABLE_SSE is defined by default. Are you saying it isn't
in RELENG_4?
That's right.
--
Tod
___
freeb
Tod McQuillin:
> Add
> options CPU_ENABLE_SSE
> to your kernel config and rebuild the kernel.
But CPU_ENABLE_SSE is defined by default. Are you saying it isn't
in RELENG_4?
--
Christian "naddy" Weisgerber [EMAIL PROTECTED]
Rick Updegrove wrote:
When I finally got 5.3-STABLE built after several mysterious failed
attempts the machine basically runs fine until...
I try to "Ctrl + Alt + F1" (or any of the F keys) that will now
consistently locks up the machine.
If I am quick enough with "Ctrl + Alt + Backspace" or
"Ctrl
On Fri, 14 Jan 2005, Christian Weisgerber wrote:
What's going on here?
Add
options CPU_ENABLE_SSE
to your kernel config and rebuild the kernel.
--
Tod McQuillin
___
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/
That's exactly what's happening. I put ggatec and ggated into
verbose mode, and tried the same thing. When I cat the file, there
appears to be nothing going on in the logs for either ggatec or ggated
(or even when I do an ls for that matter). This is definitely
different then what I expecte
I'm currently dealing with a report of ports/devel/flac dying in
its optimized SSE code on a 4.11/i386 system. What's the status
of SSE kernel support in 4.x?
freefall and the user's machine report hw.instruction_sse=0, although
they run on CPUs that do support SSE. Does RELENG_4 generally not
p
RELENG_5 sources from yesterday.
This was after attempting a dump -L (snapshot before dump) on a
huge (5TB) gconcat filesystem while scp'ing massive amounts of data
to it. The snapshot failed with ETOOLARGE; the system became very
sluggish after that then paniced a few minutes later.
I'm keeping
On Fri, Jan 14, 2005 at 10:01:10AM -0500, Brian McCann wrote:
> #echo "foo" > /share/bar
>
> Then mounting the client, I see the file. Now I delete the file on
> the server, I can still cat the file on the client. It's like the
> client can still read the old superblock or something. Any ideas
Got this overnight on a 5.3-STABLE 2005-01-13 kernel:
This GDB was configured as "i386-portbld-freebsd5.3"...
panic: Duplicate free of item 0xc37aa200 from zone 0xc103f9a0(Mbuf)
panic messages:
---
panic: Duplicate free of item 0xc37aa200 from zone 0xc103f9a0(Mbuf)
cpuid = 0
--- trap 0x1, eip =
Hi all. Since this is only in STABLE, figured I'd try here first,
then in -questions. I'm playing around with ggatec and ggated, and
would like to eventually be able to mirror a partition over the
network...but for now I've just exported /dev/da1s1d as RO, created
the ggate device on the client a
Could you see if the driver is getting loaded? The driver prints
the message: "3ware device driver for 9000 series storage controllers...".
Did the new firmware get flashed? You can download the firmware
from the 3ware website and flash it on the card using a DOS floppy.
Alternatively, you can a
> Hi, I tried to install 5.3 on my HP/Compaq nx9105 ant saw the same symptoms
> as David Johnson.
> I also tried your 1), 2) and 3) options without success (immediate shutdown).
This would probably help you to boot:
unload
boot
Run those commands from the boot loader prompt.
>
>
>
> --
Hi!
Yesterday I upgraded from 5.3 RELEASE to 5 STABLE. Everything went fine,
but my keymap is no longer working. In rc.conf I have
keymap="german.iso", but I can't type german umlauts.
As soon as I do "kbdcontrol -l german.iso" it works like expected, but
after a reboot it's gone. Am I missing
Hi!
Daring as I am, here's another attempt at having someone look into the
asr driver and why it doesn't work on amd64.
I have such a Zero-Channel RAID card laying around collecting dust,
whereas it was planned installed in a server here long time ago.
I know Scott Long looked into it long ago, and
Hiho! :-)
I'm running:
FreeBSD greatsheep 5.3-STABLE FreeBSD 5.3-STABLE #17: Sat Nov 13
13:46:48 CET 2004
and since a few days, I've been getting these messages (only a few):
deget(): pcbmap returned 6
Can I simply ignore them or do they point to a real problem?
Bye
Marc
I have an OOo process that refuses to die. ps says it is stopped and waiting
for physical I/O (and has been for about 13 hours now). lsof reports that
fd12 is not sane (f_ops is "badfileops").
Any ideas on:
- How to unwedge the process (short of rebooting)?
- What the underlying problem is?
ser
Hello Doug,
DW> scottl has been able to reproduce this on a U320 controller he has.
Scott,
We want to take this box into the lab as soon as we have a
replacement for it, but we could do with knowing the best way to
generate the problem on demand. So far the amr driver only seems
to wedge for us
Hello Doug,
Friday, January 14, 2005, 1:35:16 AM, you wrote:
DW> scottl has been able to reproduce this on a U320 controller he has. I only
DW> have U160 equipment and can't get the txn rate up high enough to reproduce
DW> the issue. The driver needs KTR instrumentation so we can see where the
D
22 matches
Mail list logo
