On Thu, 5 Aug 1999, Soren Schmidt wrote:
> Thats the promise controller, try the ata driver instead an use the
> following patch, let me know if it works...
The patch applied cleanly... I still get:
Copyright (c) 1992-1999 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
It seems Mike Hoskins wrote:
> and I just installed a Promise Ultra66. Here's my relevant kernel config
> stuff (following LINT's example):
>
> pci0: unknown card DBZ4d38 (vendor=0x105a, dev=0x4d38) at 14.0 irq 9
Thats the promise controller, try the ata driver instead an use the
following patc
Hello,
Just cvsup'd and running...
FreeBSD snafu.adept.org 4.0-CURRENT FreeBSD 4.0-CURRENT #0: Thu Aug 5 04:51:08
PDT 1999 [EMAIL PROTECTED]:/usr/src/sys/compile/SNAFU i386
I have the following onboard...
ide_pci0: at device 7.1 on pci0
and I just installed a Promise Ultra66. Here's m
> >Well, sortof, the FastTrak is AFAIK the exact same HW as the Ultra33, just
> >with a more "advanced" BIOS that does the RAID stuff. The current planned
> >support is to use it just as a Ultra33 controller, and then use ccd to
> >do the RAID magic under FreeBSD.
>
> Interesting. So the BIOS doe
At 04:49 AM 2/25/99 , Søren Schmidt wrote:
>It seems Mike Tancsa wrote:
>> On 24 Feb 1999 18:39:36 -0500, in sentex.lists.freebsd.current you wrote:
>> >
>> >Hmm, which suggests that I need to leave the "do it by hand" code in
>> >there and recommend removing the BIOS :(
>>
>> Are there any plans
It seems Mike Tancsa wrote:
> On 24 Feb 1999 18:39:36 -0500, in sentex.lists.freebsd.current you wrote:
> >
> >Hmm, which suggests that I need to leave the "do it by hand" code in
> >there and recommend removing the BIOS :(
>
> Are there any plans to support the Promise Fast Trak IDE RAID controll
Martin Cracauer said:
> In <199902230725.caa02...@y.dyson.net>, John S. Dyson wrote:
> > Søren Schmidt said:
> > >
> > > It "should" work, but the promise support in the old system is, well,
> > > hacky at best. I'm not sure if Promise supports more than one card
> > > at a time, but from lookin
On 24 Feb 1999 18:39:36 -0500, in sentex.lists.freebsd.current you wrote:
>
>Hmm, which suggests that I need to leave the "do it by hand" code in
>there and recommend removing the BIOS :(
Are there any plans to support the Promise Fast Trak IDE RAID controller ?
---Mike
Mike Tancsa (mdt
It seems Martin Cracauer wrote:
> In <199902230725.caa02...@y.dyson.net>, John S. Dyson wrote:
> > Søren Schmidt said:
> > >
> > > It "should" work, but the promise support in the old system is, well,
> > > hacky at best. I'm not sure if Promise supports more than one card
> > > at a time, but f
In <199902230725.caa02...@y.dyson.net>, John S. Dyson wrote:
> Søren Schmidt said:
> >
> > It "should" work, but the promise support in the old system is, well,
> > hacky at best. I'm not sure if Promise supports more than one card
> > at a time, but from looking at the chip specs, it should wor
Søren Schmidt said:
> It seems John S. Dyson wrote:
> > Søren Schmidt said:
> > >
> > > It "should" work, but the promise support in the old system is, well,
> > > hacky at best. I'm not sure if Promise supports more than one card
> > > at a time, but from looking at the chip specs, it should wo
It seems John S. Dyson wrote:
> Søren Schmidt said:
> >
> > It "should" work, but the promise support in the old system is, well,
> > hacky at best. I'm not sure if Promise supports more than one card
> > at a time, but from looking at the chip specs, it should work just
> > fine, and if the hard
Søren Schmidt said:
>
> It "should" work, but the promise support in the old system is, well,
> hacky at best. I'm not sure if Promise supports more than one card
> at a time, but from looking at the chip specs, it should work just
> fine, and if the hardware works, at least the new driver will s
Søren Schmidt writes:
> > Is this new ata/atapi system the rumored rewrite of the existing IDE
> > (i386/isa/wd.c, /pci/ide_pci.c) driver? How close are you to
> > completion?
>
> Yes. I have ATA disks running, and I'm close to having the ATAPI
> part done also. So far things are looking
It seems Andrew Gallatin wrote:
>
> Søren Schmidt writes:
> >
> > If you have questions, I might be able to answer, having just written
> > the support for our new ata/atapi system
> >
>
> Is this new ata/atapi system the rumored rewrite of the existing IDE
> (i386/isa/wd.c, /pci/ide_p
Søren Schmidt writes:
>
> If you have questions, I might be able to answer, having just written
> the support for our new ata/atapi system
>
Is this new ata/atapi system the rumored rewrite of the existing IDE
(i386/isa/wd.c, /pci/ide_pci.c) driver? How close are you to
completion?
I
It seems Manuel Bouyer wrote:
> Hi,
> I initially intended to ask this to John Dyson, but I don't know how
> to reach him. Maybe someone else on this list can anserw :)
> I'm looking for documentations about the promise PCI IDE controller,
> to add support for this in NetBSD. Does someone know how
Hi,
I initially intended to ask this to John Dyson, but I don't know how
to reach him. Maybe someone else on this list can anserw :)
I'm looking for documentations about the promise PCI IDE controller,
to add support for this in NetBSD. Does someone know how John got the
informations for the FreeBS
18 matches
Mail list logo
