Re: [Elecraft] K3S PART ID

Hi Mike (K4PI), I recall a bracket like the one you described from my recent addition of the KPA3A 100 watt PA module to my much older K3/10. I don't find mention of it in the KPA3A manual, but my recollection is that it was installed on the rear panel of the K3 to stabilize/hold down the KPA3A mo

[Elecraft] KPA500 & KAT500 Combo for sale

For sale KPA500 and KAT500 Combo in perfect condition for $2,750 including free shipping in CONUS. Reason for sale: I am replacing them with a RF2K-S. KPA500 Ser # 0887 Currently wired for 220v. I will include the cable. The 220V operation requires two 6A fuses that are currently installed in

Re: [Elecraft] K3S PART ID

I checked the interior of my K3 with the new KPA3A 100 watt PA module installed. There is an L-shaped hold-down bracket on the rear edge of the KPA3A board, which is secured to the rear fan panel with a single screw (not visible from the top opening of the case). It matches the dimensions of the br

[Elecraft] Fully Updated K3 with Sub Receiver and 2m Transverter built in

K3/100 + KAT3 + KRX3 + K144XV for $1,700 including shipping CONUS. K3 Ser No. 170 with the latest firmware Includes: K3/100 100W with K3AT tuner and 3 additional filters on the main board (default 2.8Khz 8 pole + 1K 8 pole + 500Hz 8 Pole + 250Hz 8 pole) Sub Receiver KRX3 with two filters (2.

[Elecraft] KXPA100 with internal tuner for sale

KXPA100 - 100w amp with internal tuner for sale $1,100 including shipping CONUS It will work with any rig, just needs key line and rf input (auto frequency sensing) Seamlessly integrated with KX2 and KX3 It provides 100W out, no-fan just a heatsink, two antenna jacks, solid-state T/R switching w

[Elecraft] SOLD: Fwd: Fully Updated K3 with Sub Receiver and 2m Transverter built in

-- Raj Dewan, N2RD rmde...@gmail.com > Begin forwarded message: > > From: Rajiv Dewan > Subject: Fully Updated K3 with Sub Receiver and 2m Transverter built in > Date: June 2, 2024 at 12:15:02 PM EDT > To: "elecraft@mailman.qth.net" > > K3/100 + KAT3 + KRX3 + K144XV for $1,700 including shi

[Elecraft] Elecraft 80M SSB Net Announcement

Please join us on 3803kHz plus (not minus) QRM (see the Netlogger discussion, below), 9PM ET Sunday (0100Z Monday). Note that the net stays on the same local time, when we switch back and forth to/from Daylight time, so the UTC time changes, but not the local time. As daylight persists more in

[Elecraft] SOLD: KXPA100 with internal tuner for sale

Sold, thanks for looking -- Raj Dewan, N2RD FN13ua From: Rajiv Dewan Sent: Sunday, June 2, 2024 12:26 PM To: elecraft@mailman.qth.net Subject: KXPA100 with internal tuner for sale KXPA100 - 100w amp with internal tuner for sale $1,100 including shipping CONUS It

[Elecraft] K4 AM Transmit Bandwith and AM Receive

What is the AM transmit bandwith on the K4, and is it adjustable? Also, has AM receive been activated on the K4, and if so, AM selectable sideband sync detector? Bob W2VGD __ Elecraft mailing list Home: http://mailman.qth.net/mailman/l

[Elecraft] Wtb K3S AM Receive crystal.

Dm offlist Sent from my Verizon, Samsung Galaxy smartphone Get Outlook for Android From: elecraft-boun...@mailman.qth.net on behalf of Bob Gale Sent: Sunday, June 2, 2024 6:27:13 PM To: elecraft@mailman.qth.net Subject: [Elecraft] K4 AM

Re: [Elecraft] K4 AM Transmit Bandwith and AM Receive

On 6/2/2024 3:27 PM, Bob Gale wrote: Also, has AM receive been activated on the K4, and if so, AM selectable sideband sync detector? I listen to the AM Broadcast band using the SSB detector. Max RX bandwidth is 5 kHz, which just about optimum for speech. I use it to evaluate performance of R

[Elecraft] Elecraft CW Net Report

Good Evening,    Conditions were poor at best.  ESP to non-existent at worst. Moderate to deep QSB with a fair amount of noise.  When I scanned each band before the net I found very few stations on the air. The sun is not being helpful :)   On 14050.5 kHz at 2200z: K0DTJ - Brian - CA W0CZ

[Elecraft] Elecraft 80M SSB Net Report

3803 kHz, 9PM ET Sunday (0100Z Monday). Thanks to the following check ins (w) and relays (rel): Call State Radio/Amp Name 1 N8SBE MIK4D/KPA500Dave (w),(op) 2 WB9JNZ ILFTdx101d/KPA1500 Eric (rel),(w) 3 K8NU OHFT710/KPA1500 Carl (c/

Re: [Elecraft] K4 AM Transmit Bandwith and AM Receive

__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: ht