You can think of the "local" port as the host's IP stack. In OVS, let's say
you created a bridge "br0", then traffic to and from any addresses associated
with "br0" would be through that "local" port. It's not directly related to
in-band control other than that the IP-related traffic is destin
Title: Samsung Enterprise Portal mySingle
Hi all,
The Spec defines 'LOCAL' port as follows:
Optional: LOCAL: Represents the switch's local networking stack and its management stack. Can be used as an ingress port or as an output port. The local port enables remote entities to interactwith
On Mon, Jan 07, 2013 at 12:45:04PM +0900, Isaku Yamahata wrote:
> From: Isaku Yamahata
> Date: Mon, 7 Jan 2013 12:39:25 +0900
> Subject: [PATCH] ovs-vsctl.8: an example to configure openflow version
>
> Signed-off-by: Isaku Yamahata
Thank you very much. Applied to master.
_
Hi all,
I have OpenVSwitch installed on one
computer which has a quad-port. I have two other computers connected to
two ports eth4 and eth5. I have eth4 connected to openflow port 2 and
eth5 connected to openflow port 1. I created 3 queues at eth5. If I set the
min-ra
On Thu, Jan 03, 2013 at 09:05:21AM -0800, Ben Pfaff wrote:
> On Thu, Jan 03, 2013 at 06:52:30AM +, Jing Ai wrote:
> > Therefore, my question is how to specify the OpenFlow version in
> > ovs-vswitchd. I could not find any command-line flag from man
> > page. Thanks!
>
> See ovs-vswitchd.conf.d
On Mon, Jan 07, 2013 at 02:25:26AM +, Lichunhe wrote:
> >On Sun, Jan 06, 2013 at 09:22:13AM +, Lichunhe wrote:
> >> Could anyone tell me the max flow entries in the datapath flow table?
> >> Or it has not a limitation. I can't find this in datapath source code.
> >
> >The datapath flow tabl
>On Sun, Jan 06, 2013 at 09:22:13AM +, Lichunhe wrote:
>> Could anyone tell me the max flow entries in the datapath flow table?
>> Or it has not a limitation. I can't find this in datapath source code.
>
>The datapath flow table doesn't have a specific limitation, but it's not
>normally a relev
On Sun, Jan 06, 2013 at 09:22:13AM +, Lichunhe wrote:
> Could anyone tell me the max flow entries in the datapath flow table?
> Or it has not a limitation. I can't find this in datapath source code.
The datapath flow table doesn't have a specific limitation, but it's not
normally a relevant qu
http://virtualnow.net/2012/09/17/building-a-sdn-based-private-cloud-in-an-hour/
On Sun, Jan 6, 2013 at 9:31 PM, behnam saberi wrote:
> ho everyone
> i will run openflow with openvswitch ,
> can anyone help me about select and running a OF controller can fast
> deploy , and configured
>
> which c
yes exaclty this scenraion.
i thought controllers simple part of my project. but i'm not a prgrammer
for write code python or c++ . i'm networker
can u help me about this ?
my status this:
. install fedora 17 on server 1 ( physical server)
. install openvswtch on server1
. install fedora 17 on se
I did that using Pox. Pox doesn't take any configuration. You will just
have to git clone the latest pox repo (betta when I did it). You can find
It in the open flow tutorials. All that you will have to do is ovs-vsctl
set controller command
On Sunday, January 6, 2013, behnam saberi wrote:
> h
ho everyone
i will run openflow with openvswitch ,
can anyone help me about select and running a OF controller can fast
deploy , and configured
which controller ?
thx
___
discuss mailing list
discuss@openvswitch.org
http://openvswitch.org/mailman/listi
Hi,
Could anyone tell me the max flow entries in the datapath flow table?
Or it has not a limitation. I can't find this in datapath source code.
___
discuss mailing list
discuss@openvswitch.org
http://openvswitch.org/mailman/listinfo/discuss
13 matches
Mail list logo
