On 6/1/23 18:30, Artemii Morozov wrote:
These changes are necessary in order to add support for stripping
VLAN tags in the future.
Signed-off-by: Artemii Morozov
Reviewed-by: Ivan Malov
Reviewed-by: Andy Moreton
---
drivers/common/sfc_efx/base/ef10_nic.c | 6 ++
drivers/common/sfc_efx
This series add a commom API to check queue id
and use it to fix a bug.
v3->v4
update API name and uptate description in the API documentation
v2->v3
update API name and use the internal function
eth_dev_validate_tx_queue() to check queue id
v1->v2
add a commom API to check queue id
Dengdui Hua
When input queue ID is invalid, it will lead to
Segmentation fault, like:
dpdk-testpmd -a :01:00.0 -- -i
testpmd> show port 0 txq/rxq 99 desc 0 status
Segmentation fault
dpdk-testpmd -a :01:00.0 -- -i
testpmd> show port 0 rxq 99 desc used count
Segmentation fault
This patch fixes it.
Fi
The API rte_eth_dev_is_valid_rxq/txq which
is used to check if Rx/Tx queue is valid.
If the queue has been setup, it is considered valid.
Signed-off-by: Dengdui Huang
---
doc/guides/rel_notes/release_23_07.rst | 6
lib/ethdev/rte_ethdev.c| 22 +++
lib/ethdev/rte
This is an offer to maintain the code for bnx2x-based
cards. It may not be possible on the long run due to
the old design of this chipset.
Note that I'm not affiliated with LSI nor Broadcom and
do not have access to documentation or other NDA-based
code.
Signed-off-by: Julien Aube
---
.mailmap
On 6/2/23 04:04, Nicolas Chautru wrote:
Realigning the argument to unsigned int to
align with number support by underlying
rte_mempool_get_bulk function.
Signed-off-by: Nicolas Chautru
---
lib/bbdev/rte_bbdev_op.h | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/l
- add support for 2500baseX_Full in addition to 1000baseT_Full.
For 2.5Gbps speed, HSGMII mode shall be enabled in serdes.
- add the possibility to support SC connectors on SFP (GPON are mostly SC)
- change the initialisation time from 60ms to 1800ms (for xPON-Based SFP)
This has been tested wit
From: Jerin Jacob
Since doxygen 1.9.7 version, HTML_TIMESTAMP configuration option
changed to TIMESTAMP [2]. Fixed the following warning[1] by providing
the correct configuration option based on doxygen version.
[1]
Warning: Tag 'HTML_TIMESTAMP' at line 115 of file 'doc/api/doxy-api.conf'
has be
On 6/1/23 18:30, Artemii Morozov wrote:
To enable VLAN stripping, two conditions must be met:
the corresponding flag must be set and the appropriate
RX prefix should be requested.
RX -> Rx
VLAN stripping is supported for ef100 datapath only.
When you read below notes carefully, you'll under
On Wed, May 31, 2023 at 04:49:04PM +0200, Thomas Monjalon wrote:
> 31/05/2023 16:07, Jerin Jacob:
> > On Wed, May 31, 2023 at 7:31 PM Thomas Monjalon wrote:
> > >
> > > 31/05/2023 15:21, Jerin Jacob:
> > > > On Wed, May 31, 2023 at 6:17 PM wrote:
> > > > >
> > > > > From: Jerin Jacob
> > > > >
>
On Fri, Jun 02, 2023 at 02:00:32PM +0530, jer...@marvell.com wrote:
> From: Jerin Jacob
>
> Since doxygen 1.9.7 version, HTML_TIMESTAMP configuration option
> changed to TIMESTAMP [2]. Fixed the following warning[1] by providing
> the correct configuration option based on doxygen version.
>
> [1
On Fri, Jun 2, 2023 at 2:11 PM Bruce Richardson
wrote:
>
> On Fri, Jun 02, 2023 at 02:00:32PM +0530, jer...@marvell.com wrote:
> > From: Jerin Jacob
> >
> > Since doxygen 1.9.7 version, HTML_TIMESTAMP configuration option
> > changed to TIMESTAMP [2]. Fixed the following warning[1] by providing
>
On 6/1/23 18:30, Artemii Morozov wrote:
Extract vlan tci provided by the HW in the prefix and put it to mbuf.
vlan -> VLAN, tci -> TCI
VLAN stripping is supported for ef100 datapath only.
It should be highlighted that it is device level offload.
Signed-off-by: Artemii Morozov
Reviewed-b
On 6/2/23 01:23, Denis Pryazhennikov wrote:
Separate the original link update function into
two functions: state retrieval and update.
This improves code clarity and maintainability.
Signed-off-by: Denis Pryazhennikov
Reviewed-by: Ivan Malov
Reviewed-by: Andy Moreton
Acked-by: Andrew Rybche
On 6/2/23 01:23, Denis Pryazhennikov wrote:
Added new macros to simplify working with FEC bits
Full stop missing above.
Signed-off-by: Denis Pryazhennikov
Reviewed-by: Andy Moreton
Acked-by: Andrew Rybchenko
On 5/29/2023 2:09 PM, Dongdong Liu wrote:
> From: Huisong Li
>
> Driver doesn't initialize RTC time during probe phase, which
> lead to an inaccurate time.
>
> Fixes: 38b539d96eb6 ("net/hns3: support IEEE 1588 PTP")
> Cc: sta...@dpdk.org
>
> Signed-off-by: Huisong Li
> Signed-off-by: Dongdong
On 6/2/23 01:23, Denis Pryazhennikov wrote:
Support ethdev methods to query and set FEC information.
Limitations: ignoring rte_eth_fec_get_capability() results
can lead to NOFEC if the device is not strated.
Signed-off-by: Denis Pryazhennikov
Reviewed-by: Ivan Malov
Reviewed-by: Andy Moreton
Summary must not be a statement. Also summary is too long.
On 6/1/23 14:42, Denis Pryazhennikov wrote:
NIC Partitioning mode in SFN devices means multiple PFs per network port.
When NIC Partitioning is configured, apart from the privileged adapter(s) the
other unprivileged adapter(s) will share
From: Mcnamara, John
Sent: Thursday, June 1, 2023 11:42 PM
To: dev@dpdk.org
Cc: tho...@monjalon.net; david.march...@redhat.com
Subject: DPDK Release Status Meeting 2023-06-01
Release status meeting minutes 2023-06-01
=
* main
* Starting to merge patche
Julien, welcome aboard as the new bnx2x maintainer. Can you please review this
patch?
Med venlig hilsen / Kind regards,
-Morten Brørup
-Original Message-
From: Morten Brørup [mailto:m...@smartsharesystems.com]
Sent: Monday, 16 January 2023 14.07
To: dev@dpdk.org; roret...@linux.microsof
On 5/29/2023 2:09 PM, Dongdong Liu wrote:
> This patchset contains some bugfixes for hns3 pmd.
>
> Chengwen Feng (3):
> net/hns3: fix mbuf leak when start rxq in resetting
> net/hns3: fix mbuf leak when start rxq after resetting
> net/hns3: fix no errcode returned when failed to init queue
>
Hi Ferruh
Many thanks for your review.
On 2023/6/2 17:00, Ferruh Yigit wrote:
On 5/29/2023 2:09 PM, Dongdong Liu wrote:
From: Huisong Li
Driver doesn't initialize RTC time during probe phase, which
lead to an inaccurate time.
Fixes: 38b539d96eb6 ("net/hns3: support IEEE 1588 PTP")
Cc: sta..
> -Original Message-
> From: Thomas Monjalon
>
> Like previous patches for the reorder library from Volodymyr, the official
> maintainer (Reshma) is not reviewing.
> Does it mean Reshma is not interested anymore in this maintenance?
Hi Thomas,
I would like to drop from the maintainer
From: Jerin Jacob
Since doxygen 1.9.7 version, HTML_TIMESTAMP configuration option
changed to TIMESTAMP [2]. Fixed the following warning[1] by
removing TIMESTAMP options all together as all new versions(since 1.8.9)
of doxygen this option is disabled by default. Another option was
considered to h
On Fri, Jun 02, 2023 at 04:36:59PM +0530, jer...@marvell.com wrote:
> From: Jerin Jacob
>
> Since doxygen 1.9.7 version, HTML_TIMESTAMP configuration option
> changed to TIMESTAMP [2]. Fixed the following warning[1] by
> removing TIMESTAMP options all together as all new versions(since 1.8.9)
> o
Hi Brian,
> -Original Message-
> From: Brian Dooley
> Sent: Friday, May 26, 2023 11:27 AM
> To: Ji, Kai
> Cc: dev@dpdk.org; gak...@marvell.com; Dooley, Brian
>
> Subject: [PATCH v4] crypto/qat: default to IPsec MB for computations
>
> Pre and post computations currently use the OpenSSL
Hi Thomas and Reshma,
I would be interested in taking on the role of maintaining the reorder library.
> -Original Message-
> From: Pattan, Reshma
> Sent: Friday, June 2, 2023 1:06 PM
> To: Thomas Monjalon ; Volodymyr Fialko
>
> Cc: dev@dpdk.org; Jerin Jacob Kollanukkaran ; Anoob Joseph
02/06/2023 13:30, Volodymyr Fialko:
> Hi Thomas and Reshma,
>
> I would be interested in taking on the role of maintaining the reorder
> library.
If Reshma accepts, please send a patch to replace Reshma.
It will require an ack from Reshma.
Thank you both
> From: Pattan, Reshma
> > > From: Tho
From: Huisong Li
Driver doesn't initialize RTC time during probe phase, which
lead to an inaccurate time.
Fixes: 38b539d96eb6 ("net/hns3: support IEEE 1588 PTP")
Cc: sta...@dpdk.org
Signed-off-by: Huisong Li
Signed-off-by: Dongdong Liu
---
drivers/net/hns3/hns3_ptp.c | 26 +++
This patchset contains some bugfixes for hns3 pmd.
v1->v2:
- Fix the comments for [PATCH 01/11] suggested by Ferruh.
Chengwen Feng (3):
net/hns3: fix mbuf leak when start rxq in resetting
net/hns3: fix mbuf leak when start rxq after resetting
net/hns3: fix no errcode returned when failed to
From: Huisong Li
The enabled status of RTC time will be cleared after global
or IMP reset, which cause the local RTC time doesn't work.
So this patch fix it.
Fixes: 38b539d96eb6 ("net/hns3: support IEEE 1588 PTP")
Cc: sta...@dpdk.org
Signed-off-by: Huisong Li
Signed-off-by: Dongdong Liu
---
From: Huisong Li
This patch adds the uninitialization process of PTP in case
of having an impact on PF driver in kernel.
Fixes: 38b539d96eb6 ("net/hns3: support IEEE 1588 PTP")
Cc: sta...@dpdk.org
Signed-off-by: Huisong Li
Signed-off-by: Dongdong Liu
---
drivers/net/hns3/hns3_ethdev.c | 2 +
From: Huisong Li
This patch extracts a PTP header file to contain PTP registers
and external API in order to make PTP code structure more clear.
Fixes: 38b539d96eb6 ("net/hns3: support IEEE 1588 PTP")
Cc: sta...@dpdk.org
Signed-off-by: Huisong Li
Signed-off-by: Dongdong Liu
---
drivers/net/h
From: Chengwen Feng
In the reset restore-conf phase, the reset process will allocate for
the Rx ring mbufs unconditionlly.
And the rte_eth_dev_rx_queue_start() will also allocate for the Rx ring
mbufs unconditionlly.
So if the rte_eth_dev_rx_queue_start() is invoked after restore-conf
phase, th
From: Chengwen Feng
If hns3_init_queues() return failed, the hns3vf_do_start() should
return errcode. This patch fixes it.
Fixes: 43d8adf3891c ("net/hns3: fix RSS flow rule restore")
Cc: sta...@dpdk.org
Signed-off-by: Chengwen Feng
Signed-off-by: Dongdong Liu
---
drivers/net/hns3/hns3_ethdev
From: Chengwen Feng
In the reset restore-conf phase, the reset process will allocate for
the Rx ring mbufs unconditionlly.
And the rte_eth_dev_rx_queue_start() will also allocate for the Rx ring
mbufs unconditionlly.
So if the rte_eth_dev_rx_queue_start() is invoked before restore-conf
phase, t
From: Jie Hai
This patch fixes possible use of uninitialized variable
"old_tuple_fields".
Fixes: e3069658da9f ("net/hns3: reimplement hash flow function")
Cc: sta...@dpdk.org
Signed-off-by: Jie Hai
Signed-off-by: Dongdong Liu
---
drivers/net/hns3/hns3_flow.c | 5 +++--
1 file changed, 3 inse
From: Dengdui Huang
This patch modify the code that violates the coding standards.
Signed-off-by: Dengdui Huang
Signed-off-by: Dongdong Liu
---
drivers/net/hns3/hns3_regs.c | 3 +--
drivers/net/hns3/hns3_rxtx.c | 10 +++---
2 files changed, 4 insertions(+), 9 deletions(-)
diff --git a/d
From: Dengdui Huang
This patch fix inaccurate log
Fixes: bba636698316 ("net/hns3: support Rx/Tx and related operations")
Fixes: a951c1ed3ab5 ("net/hns3: support different numbers of Rx and Tx queues")
Cc: sta...@dpdk.org
Signed-off-by: Dengdui Huang
Signed-off-by: Dongdong Liu
---
drivers/ne
From: Dengdui Huang
This patch remove log redundant line break
Fixes: d51867db65c1 ("net/hns3: add initialization")
Fixes: c6332c3cf9f0 ("net/hns3: support module EEPROM dump")
Cc: sta...@dpdk.org
Signed-off-by: Dengdui Huang
Signed-off-by: Dongdong Liu
---
drivers/net/hns3/hns3_ethdev.c | 1
On 6/2/2023 8:52 AM, Dengdui Huang wrote:
> The API rte_eth_dev_is_valid_rxq/txq which
> is used to check if Rx/Tx queue is valid.
> If the queue has been setup, it is considered valid.
>
> Signed-off-by: Dengdui Huang
> ---
> doc/guides/rel_notes/release_23_07.rst | 6
> lib/ethdev/rte_et
On 6/2/2023 8:52 AM, Dengdui Huang wrote:
> When input queue ID is invalid, it will lead to
> Segmentation fault, like:
>
> dpdk-testpmd -a :01:00.0 -- -i
> testpmd> show port 0 txq/rxq 99 desc 0 status
> Segmentation fault
>
> dpdk-testpmd -a :01:00.0 -- -i
> testpmd> show port 0 rxq 99
On 6/2/2023 4:33 AM, 王志宏 wrote:
Apologize that I have to go directly to function names to explain :)
- rte_eal_intr_init creates eal_intr_thread_main which starts
eal_intr_handle_interrupts
- rte_mp_channel_init creates mp_handle which processes messages
registered by rte_mp_action_regist
On 5/31/2023 7:55 AM, Zhihong Wang wrote:
Secondary would crash if it tries to handle mp requests before memory
init, since globals such as eth_dev_shared_data_lock are not accessible
to it at this moment.
---
Acked-by: Anatoly Burakov
--
Thanks,
Anatoly
On 6/2/2023 12:41 PM, Dongdong Liu wrote:
> This patchset contains some bugfixes for hns3 pmd.
>
> v1->v2:
> - Fix the comments for [PATCH 01/11] suggested by Ferruh.
>
> Chengwen Feng (3):
> net/hns3: fix mbuf leak when start rxq in resetting
> net/hns3: fix mbuf leak when start rxq after re
Hi Maxime,
I don't think it does since no offset position change for the symbol. Also this
only extends the type, so still fine if using uin16_t from application.
I did not receive an email from CICD related to ABI change when pushing this
(unlike the other serie for the MLD/FFT changes pushed e
On 5/24/2023 8:39 AM, Rongwei Liu wrote:
> Add new rte_actions to push and remove the specific
> type of IPv6 extension to and from original packets.
>
> v1: Split the PMD implementation, add a description into release notes.
>
> Rongwei Liu (2):
> ethdev: add IPv6 extension push remove action
On 6/1/2023 5:32 PM, Rushil Gupta wrote:
> Thanks for the quick response!
> Just for my own knowledge, what Junfeng described is the process to
> fix the bug if a bug is present in the main dpdk repo?
>
Correct.
As main dpdk repo doesn't rewrite git history, any bug there needs to be
fixed with
On 5/18/2023 4:39 PM, Stephen Hemminger wrote:
> On Thu, 18 May 2023 16:44:58 +0800
> Chaoyong He wrote:
>
>> From: Long Wu
>>
>> This patch replaces the usage of the word 'master/slave' with more
>> appropriate word 'main/member' in bonding PMD as well as in its docs
>> and examples. Also the t
From: Jeremy Spewock
This update to the RFC addresses comments recieved on the previous about
formatting and implementation. Things that are new to this patch series are:
* New class similar to the RemoteSession that handles interactive remote
sessions
* A keepalive for the interactive SSH sessi
From: Jeremy Spewock
Adds a new test suite for running smoke tests that verify general
configuration aspects of the system under test. If any of these tests
fail, the DTS execution terminates for that build target as part of a
"fail-fast" model.
Signed-off-by: Jeremy Spewock
---
dts/conf.yaml
From: Jeremy Spewock
added paramiko to the dependency files
Signed-off-by: Jeremy Spewock
---
dts/poetry.lock| 160 ++---
dts/pyproject.toml | 1 +
2 files changed, 124 insertions(+), 37 deletions(-)
diff --git a/dts/poetry.lock b/dts/poetry.lock
On 5/24/2023 8:12 AM, Chaoyong He wrote:
> From: Long Wu
>
> DPDK bonding PMD mixing use 'bonded' and 'bonding' currently, this
> patch replaces the usage of the word 'bonded' with more appropriate
> word 'bonding' in bonding PMD and ethdev library as well as in
> their docs. Also the test app an
The Linux kernel option has an added underscore.
Fixes: 14ad4f01845331a ('doc: add Marvell OCTEON TX2 platform guide')
Signed-off-by: Thierry Herbelot
---
doc/guides/platform/cnxk.rst | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/guides/platform/cnxk.rst b/doc/guides/pl
On Thu, Jun 01, 2023 at 12:23:39PM +, Zhang, Qi Z wrote:
>
>
> > -Original Message-
> > From: David Marchand
> > Sent: Thursday, June 1, 2023 4:50 PM
> > To: Richardson, Bruce ; Tyler Retzlaff
> >
> > Cc: dev@dpdk.org; tho...@monjalon.net; Zhang, Qi Z
> >
> > Subject: Re: [PATCH 0/
This patch set introduces two new nodes to transmit & receive packets
from kernel. This nodes can be used for any exception path handling or
to forward any control plane traffic to kernel or receive from kernel stack.
V3:
* Address review comments
* Drop test-graph application from the patch set
Patch adds a node to transmit the packets to kernel over
a raw socket.
Signed-off-by: Vamsi Attunuru
---
doc/guides/prog_guide/graph_lib.rst | 9 ++
lib/node/kernel_tx.c| 122
lib/node/kernel_tx_priv.h | 16
lib/node/meson.build
Adds a node to receive packets from kernel over
a raw socket.
Signed-off-by: Vamsi Attunuru
---
doc/guides/prog_guide/graph_lib.rst | 8 +
lib/node/kernel_rx.c| 276
lib/node/kernel_rx_priv.h | 48 +
lib/node/meson.build
For ethdev_rx node, node_next details can be populated
during node cloning time and same gets assigned to
node context structure during node initialization.
Patch removes overriding node_next details in node
init().
Signed-off-by: Vamsi Attunuru
---
lib/node/ethdev_ctrl.c | 1 +
lib/node/ethdev
On 5/22/2023 9:04 AM, Chaoyong He wrote:
> This patch series add the support of report packet type function for
> NFP PMD:
> - Add a new contributor entry
> - Rename one data field of RX descriptor
> - Refactor the logic of NFP reconfig
> - Add the logic of report packet type
>
> Qin Ke (5):
> m
On 5/22/2023 12:40 PM, Chaoyong He wrote:
> This patch series add the support of showing firmware version,
> also modify the data structure and logic of reading and store
> firmware version, to make it sync with the kernel driver.
>
> Chaoyong He (2):
> net/nfp: align reading of version info wit
From: Pavan Nikhilesh
Add IPv4 reassembly node.
Signed-off-by: Pavan Nikhilesh
---
Depends-on: series-28278
v2 Changes:
- Fix compilation.
doc/guides/prog_guide/graph_lib.rst | 8 ++
lib/node/ethdev_rx.c| 1 +
lib/node/ethdev_rx_priv.h | 1 +
lib/node/ip4_re
From: Pavan Nikhilesh
Use optimized rte_hash_k32_cmp_eq routine for key comparison for
x86 and ARM64.
Use CRC instructions for hash generation on ARM64.
Signed-off-by: Pavan Nikhilesh
Reviewed-by: Ruifeng Wang
---
On Neoverse-N2, performance improved by 10% when measured with
examples/ip_reass
From: Pavan Nikhilesh
Add reassembly perf autotest for both ipv4 and ipv6 reassembly.
Each test is performed with variable number of fragments per flow,
either ordered or unordered fragments and interleaved flows.
Signed-off-by: Pavan Nikhilesh
Reviewed-by: Amit Prakash Shukla
Tested-by: Amit
On 5/24/2023 8:12 AM, Chaoyong He wrote:
> diff --git a/lib/ethdev/rte_ethdev.h b/lib/ethdev/rte_ethdev.h
> index 85439e3a41..e717079dd0 100644
> --- a/lib/ethdev/rte_ethdev.h
> +++ b/lib/ethdev/rte_ethdev.h
> @@ -2036,12 +2036,13 @@ struct rte_eth_dev_owner {
> /** Device supports link state inte
On 5/28/2023 3:39 PM, Ori Kam wrote:
>>>
>>> When the type field of the IPv6 routing extension is 4, it means segment
>>> routing header.
>>>
>>> In this case, set the last_entry to be segment_left minus 1 if the user
>> doesn't
>>> specify the header length explicitly.
>>>
>>> Signed-off-by: Rong
Previously the noisy neighbour vnf simulation would only operate in io
mode, forwarding packets as is. However, this limited the usefulness of
noisy neighbour simulation.
This feature has now been expanded to supporting mac, macswap, and
5tswap modes. To facilitate adding this support, some new he
On 5/22/2023 2:23 PM, Simei Su wrote:
> This patchset cover below parts:
> (1)Introduce a new timesync API called "rte_eth_timesync_adjust_freq" that
>enables frequency adjustment during PTP timesync. This new API aligns with
>the kernel PTP which already supports frequency adjustment. It b
Replace the use of rte_atomic.h types and functions, instead use GCC
supplied C++11 memory model builtins.
Signed-off-by: Tyler Retzlaff
Acked-by: Morten Brørup
---
lib/stack/rte_stack_lf_generic.h | 16 +---
1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/lib/stack/rt
Replace the use of rte_atomic.h types and functions, instead use GCC
supplied C++11 memory model builtins.
Signed-off-by: Tyler Retzlaff
Acked-by: Morten Brørup
---
drivers/net/ice/ice_dcf.c| 1 -
drivers/net/ice/ice_dcf_ethdev.c | 1 -
drivers/net/ice/ice_ethdev.c | 12 --
Replace the use of rte_atomic.h types and functions, instead use GCC
supplied C++11 memory model builtins.
This series covers the libraries and drivers that are built on Windows.
The code has be converted to use the __atomic builtins but there are
additional during conversion I notice that there
Replace the use of rte_atomic.h types and functions, instead use GCC
supplied C++11 memory model builtins.
Signed-off-by: Tyler Retzlaff
Acked-by: Morten Brørup
Acked-by: Bruce Richardson
Acked-by: Kevin Laatz
---
drivers/dma/idxd/idxd_internal.h | 3 +--
drivers/dma/idxd/idxd_pci.c | 1
Replace the use of rte_atomic.h types and functions, instead use GCC
supplied C++11 memory model builtins.
Signed-off-by: Tyler Retzlaff
Acked-by: Morten Brørup
---
drivers/net/ixgbe/ixgbe_bypass.c | 1 -
drivers/net/ixgbe/ixgbe_ethdev.c | 18 --
drivers/net/ixgbe/ixgbe_ethdev.
Replace the use of rte_atomic.h types and functions, instead use GCC
supplied C++11 memory model builtins.
Signed-off-by: Tyler Retzlaff
Acked-by: Morten Brørup
---
drivers/net/null/rte_eth_null.c | 28 ++--
1 file changed, 18 insertions(+), 10 deletions(-)
diff --git a
Replace the use of rte_atomic.h types and functions, instead use GCC
supplied C++11 memory model builtins.
Signed-off-by: Tyler Retzlaff
Acked-by: Morten Brørup
Acked-by: Bruce Richardson
---
drivers/net/ring/rte_eth_ring.c | 26 --
1 file changed, 16 insertions(+), 10
On 5/22/2023 2:23 PM, Simei Su wrote:
> This patch reworks code to split delay request message parsing
> from follow up message parsing which doesn't break original logic.
>
> Signed-off-by: Simei Su
> Signed-off-by: Wenjun Wu
>
Refactoring looks good to me.
On 5/22/2023 2:23 PM, Simei Su wrote:
> This patch applys PI servo algorithm to leverage frequency adjustment
> API to improve PTP timesync accuracy.
>
> The command for starting ptpclient with PI algorithm is:
> ./build/examples/dpdk-ptpclient -a :81:00.0 -c 1 -n 3 -- -T 0 -p 0x1
> --controll
On Thu, Jun 01, 2023 at 08:00:41AM -0700, Stephen Hemminger wrote:
> This patch series was generated by using the existing
> Coccinelle script to find where snprintf() is used but
> strlcpy() could be used instead.
i guess the motivation here is strlcpy is safer to use than the portable
snprintf?
On 3/16/2023 2:19 PM, Gregory Etelson wrote:
> From: Eli Britstein
>
> Change flow rule type to be uint64_t (instead of currently uint32_t) to
> be able to accommodate larger IDs, as a pre-step towards allowing user-id
> to flows.
>
> Signed-off-by: Eli Britstein
>
Acked-by: Ferruh Yigit
On 3/16/2023 1:16 PM, Dongdong Liu wrote:
> Hi Thomas
> On 2023/3/15 21:43, Thomas Monjalon wrote:
>> 15/03/2023 12:00, Dongdong Liu:
>>> From: Jie Hai
>>> --- a/doc/guides/rel_notes/release_23_03.rst
>>> +++ b/doc/guides/rel_notes/release_23_03.rst
>>> -* No ABI change that would break compatibil
On 3/16/2023 2:19 PM, Gregory Etelson wrote:
> From: Eli Britstein
>
> Upon creation of a flow, testpmd assigns it a flow ID. Later, the
> flow ID is used for flow operations (query, destroy, dump).
>
> The testpmd application allows to manage flow rules with its IDs.
> The flow ID is known only
On 3/15/2023 11:00 AM, Dongdong Liu wrote:
> From: Jie Hai
>
> Command show-port shows rss info only if rss_conf.rss_key
> is not null but it will never be true. This patch allocates
> memory for rss_conf.rss_key and makes it possible to show
> rss info.
>
Why 'rss_conf.rss_key == NULL' case i
On 3/15/2023 11:00 AM, Dongdong Liu wrote:
> From: Jie Hai
>
> show RSS types details and adjust RSS info display format as following:
>
> - RSS info
> -- hf:
> ipv4 ipv4-frag ipv4-other ipv6 ipv6-frag ipv6-other
> -- key len: 40
> -- key (hex):
> 6d
Thanks for the clarification and for squashing the bug into the main commit.
I just tested the net-next branch and it seems to log the right
message on the device.
On Fri, Jun 2, 2023 at 7:49 AM Ferruh Yigit wrote:
>
> On 6/1/2023 5:32 PM, Rushil Gupta wrote:
> > Thanks for the quick response!
>
On Thu, Jun 01, 2023 at 11:18:52AM +0100, Bruce Richardson wrote:
> On Wed, May 31, 2023 at 03:05:31PM -0700, Stephen Hemminger wrote:
> > In DPDK API's rte_strlcpy() is not intended to be used directly.
> > It was introduced as a replacement for when operating system
> > libraries were missing str
85 matches
Mail list logo
