in
/usr/bin. obsession-logout and obsession-exit. I use obsession-logout. It
displays a selection with buttons for the various choices. It's a session
management application for lightweight window managers.
--
Mail
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
w
Title: 研博科技
研华-研博WindowsCE MOC认证培训2005年9月班招生
时间：2005年9月15日―17日，上午8：00―中午12：00，中午1:30―下午6：00
地点：广州市天河区中山大道中438号,羊城花园趣苑A座1803
课程：（1）WinCE平台开发培训课程（2天）
（2）WinCE应用开发培训课程（1天）
证书：微软MOC认证培训证书。
报名联系方法：
（1）填写报名表（2）联系您所在地的研博业务代表或者直接联系研博公司。（3）将培训费汇入研博公司帐号。（4）接收研博公司或者所在地业务代表发出的
Every time I use apt-get to install packages, it stops while configuring
xemacs20-support with the following error message:
(Reading database ... 68943 files and directories currently installed.)
Preparing to replace xemacs20-support 20.4-5 (using
xemacs20-support_20.4-13.deb) ...
Unpacking repl
apt-get does stop every time I want to run it while it is processing
xemacs20-support. I wanted to do
dpkg --remove xemacs20-support
on which xemacs20-nomule depends, so I said
dpkg --remove xemacs20-nomule
this gives:
dpkg: dependency problems prevent removal of xemacs20-nomule:
calc depends
I realized that in the standard configuration for ProFTPd the daemon
now runs as User and Group root. In an older version it used to be
User nobody and Group nogroup.
What's the reason for this change?
Stef
I want to remove lg-issue20, but dpkg gives me this perl error message:
Can't locate HTML/Parser.pm in @INC (@INC contains:
/usr/lib/perl5/i386-linux/5.004 /usr/lib/perl5
/usr/local/lib/site_perl/i386-linux /usr/local/lib/site_perl .) at
/usr/lib/lg/fixlinks line 25.
...
J.H.M. Dassen said In-
I am a first time installer of Debian
Linux 2.0 with Win 98 on the computer.
What to I enter when on the installation program so I can get Emacs, X etc.
when installing from the Binary i386 CD I read:
Insert the CD Rom with the block device name:I
enter: /dev/hda3, (have tried /dev
tutorial help.
Bob Barth
e-mail: [EMAIL PROTECTED]
I AM NEW. It is getting
better. I see more than the "S" prompt once in a
while!
Installed the Linux system (CD's) again
tonight that I configured with dselect configure. I am using an Intel 740
2D/3D Graphics Accelerator chip (set).
Under dselect configue I tried to set the
video ad
rompt I execute pon and
get the following response:
/usr/sbin/pppd: In file
/etc/ppp/peers/provider: unrecognized D option '/dev/modem'
From the Debian~# prompt I execute fetchmail and get the fiollowing
response:
fetchmail: no mail servers
have been specified.
dselec
From the Debian~# prompt I execute fetchmail and get the fiollowing
response:
fetchmail: no mail servers
have been specified.
From dselect I ran appconfig (I think it was)
and I answered the queries and see my responses in files I have observed with mc
while trying to get the
I am NEW, but getting experience!
From the Debian~# prompt I execute pon, I
get the following responses depending whether I have '/dev/modem' or
'/dev/modem!' in the provider file (per instructions):
/usr/sbin/pppd: In file
/etc/ppp/peers/provider: unrecognized D option '/dev/mode
I have installed Debian 2. four times this evening. I am trying to install
the Office version, [not 'home' or 'development' selections] when I answered
correctly the cryptic prompt asking how I want to select the packages to
install on the CD.
After the Install of dselect, it goes to configure an
A new installation. My modem connects but I have a PAP Authentication
problem. After executing 'pon' from 'root' here is the return of 'plog'
PAP Authentication failed
LCP Terminated by peer
I execute 'pon' a second time and 'plog' reports:
Connection established using interface pp
My ISP uses PAP and it takes 1 minute and 30 seconds for me to be logged on
(when doing it from Win 98).
What do I do to extend the period my Debian 2.0 system waits for my ISP to
log me on?
I get an 'Authentication failed' and 'connection terminated' message after I
execute 'pon' .
Bob Barth
e
I Installed X with a Trio S3 card. I answer the 'xf86config' query "NO" I
DO NOT WANT the physical window larger than the screen, BUT IT ALWAYS IS.
The mouse brings it over, but it makes things difficult.
I did SuperProbe and entered the return for chip set in 'xv86config' . I
cannot find the bo
I know this is simple, but how do I get my Okidata OL 410e installed at
LPT0 (LPT1).
magicfilter sets parameters, but I need something that sets up the printer.
Like an installation script that creates a printer.conf file (or whatever
name).
I have 9 books here and they don't say how to do this r
1. How do I create a floppy Rescue Disk from a recently installed Debian
2.0 system?
2. How do I install incons for applications in X -- or set a desk top
etc.?
Bob Barth
EMAIL: [EMAIL PROTECTED]
When I execute arena from X, I get the first screen telling about it while
it is loading a gif file from the arena site...then I am returned to X. An
error message said something like:
no backpaper
1. What and where is the config file?
2. What do I do to either install, configure, or run
PRECISELY, where can I get the 'netscape4' package.
I have Debian 2.0 CD's.
1. Where on WHAT CD (Source, Contrib, Binary)?
2. What FTP site and URL?
TIA,
Bob Barth
EMAIL: [EMAIL PROTECTED]
Hi there!
The day before yesterday I went to ftp.debian.org and fetched hamm by
saying
get current.tar.gz
in linux/distributions/debian/hamm/hamm/disks-i386
and the the same with the binary directories.
I unziped the received file. the files in current have the date Jun 24
02:15 but the directory
scape! With 16 MB you can use Netscape 3. For Netscape 4 you
need 32 MB RAM (Netscape 4 will work eith 16 MB RAM, but ist quite
slow.) With 4 MB you can use a virtual console with Lynx as
webbrowser, mutt or something similar as e-mail client, ncftp or
similar for ftp and tin or something similar f
Is there a Text newsreader that can handle attachments (like mutt can
do with e-mails)?
Stef
I did a
zgrep pine Contents-i386.gz | grep bin
which shows no result (the Contents-i386.gz is from potato).
Where is pine?
Stef
> slrn is very mutt-like (or is it the other way around?)
> It handles attachments well and I am using it right now to read these lists.
OK, I started it and had a look trough the documentation. If I
understood it right, I have to save an attachment to a posting first,
and then open the saved file
I want to install nntp. It depends on cnews. When I want to install
cnews, it conflicts with inewsinn. But inewsinn is needed for my
newsreaders to work, isn't it?
What do I have to do?
Stef
I have a Mac Stuffit archive (ending .sit). How can I extract such a
file within linux?
Stef
I'm quite puzzled since I cannot find the answer to what seems to be a
faq: I want that samba uses /etc/passwd and not /etc/smbpasswd to
authenticate a user. How do I do that?
Stef
> > I'm quite puzzled since I cannot find the answer to what seems to be a
> > faq: I want that samba uses /etc/passwd and not /etc/smbpasswd to
> > authenticate a user. How do I do that?
>
> You can't.
So every user has to use passwd AND smbpasswd every time he wants to
change his password?
Ste
> You can sync them, so that users can use the windows dialog to change
> the samba and unix password. See the comments im smb.conf about
> password sync.
What windows dialog do you mean?
Anyway, I set unix password sync = true and tried to change passwords
using smbpasswd. But I always get
smbp
I have two machines on different networks. When I mount a nfs volume,
it seems to work and I can cd to it, but when I want to copy a file
from it I get:
nfs: server nfs.server not responding, still trying
nfs: server nfs.server not responding, still trying
nfs: task 416 can't get a request slot
A
> nfs: server nfs.server not responding, still trying
> nfs: task 416 can't get a request slot
setting rsize=1024,wsize=1024 in the mount options solved the
problem. I also tried sizes of 512 and 2048. Both crashed the nfs
connection.
Stef
On machine b I smbmount a share from machine a. On machine c I mount a
nfs volume on b which includes the share from a. When I cd into the
directory on c now, I can only see the first directory in the path
mounted from machine a. When I cd to it, it's empty, whereas on
machine a there are further s
I use apt-get to keep my system up to date. Suddenly, smail shows an
annoying behaviour: When mail for local users arrives, it is stored in
/var/spool/smail/input and only delivered to /var/spool/mail the next
time smail runs through the queue (about 10 to 15 minutes later).
Any idea why smail
I am desperately trying to insert a z with caron (it looks like this:
** **
** **
**
**
**
**
**
**
*
into an emacs buffer. I got some hints and have been told that I need
emacs 20. I see there is emacs-czech, but its only for emacs 19...
I can cut and paste with left and middle mouse button without problem
from one xterm to another. Not so if lynx is running in an xterm: I
can neither cut nor paste.
Any idea what could be wrong?
Stef
> > I can cut and paste with left and middle mouse button without problem
> > from one xterm to another. Not so if lynx is running in an xterm: I
> > can neither cut nor paste.
>
> Hold down the SHIFT key when you select text in lynx. Works for me
> either in a text console (gpm) or X.
Yep, that
Ho do I configure exim to send email to [EMAIL PROTECTED] where x is not
known to a user on the local machine?
For virtual domains I have
search_type = lsearch*@
and
*: user
in the corresponding alias file
On a machine with no virtual domains I also said
search_type = lsearch*@
under system_ali
> Ho do I configure exim to send email to [EMAIL PROTECTED] where x is not
> known to a user on the local machine?
What I meant is: mail sent to [EMAIL PROTECTED] should be delivered to a
local user if x is not known...
I have a PDF document which I printed to a PS File on windows NT. I
used fixps to repair the NT errors. Then I used psresize to scale the
document to a4. The resulting file can be viewed with gs without
problem. But when I use psnup -4 -d on the file, the resulting PS
cannot be printed or viewed wi
I used Adobe Acrobat to export a PDF File as PS. But whether I choose
Font Inclusion: All Embedded
or
Font Inclusion: None
pap always reports
Arial-BoldItalic not found, using Courier.
TimesNewRoman-Bold not found, using Courier.
...
when sending the exported file to a LaserWriter.
Why are th
I setup samba as a PDC for Windows NT. It works. But when I want to
change the password from the Win NT machine I get:
The User name or old password is incorrect. Letters in...
And in the smb logfile I get:
smbd/chgpasswd.c:check_oem_password(699)
check_oem_password: incorrect password length (44
> How did you configure Samba as a PDC? Last I heard Samba didn't yet handle
> NT Domain logins since the code was under heavy development.
samba can be a PDC since version 2
Stef
> > > How did you configure Samba as a PDC? Last I heard Samba didn't yet handle
> > > NT Domain logins since the code was under heavy development.
> >
> > samba can be a PDC since version 2
>
> The code for NT PDC's is only available through CVS.
> http://us1.samba.org/samba/docs/ntdom_faq/samba
I work on a Debian 2.0 machine. When I logon to a SunOS thingy (uname
-s gives: SunOS owl 5.5 Generic sun4c sparc SUNW,Sun_4_75), setenv
DISPLAY to my screen and start emacs (Version 19.25.1) I get a window
which has double the size it should have. If I type a character, I get
a space immediately a
> Just out of curiosity, when you log in directly from the linux box, what
> is the value of your TERM variable. What is this when you log in from the
> IRIX box?
It is vt100 from the linux box and xterm from the IRIX. However, if I
setenv TERM xterm in the shell on my linux box, I still get the s
> which has double the size it should have. If I type a character, I get
A correction: The window is only twice as wide as it should be. The
height of the window seems to be ok.
Stef
> Try telling emacs explicitly which font to use.
Yep, that solved the problem.
Thanks a lot!
Stef
I want to use my ZIP drive and am therefore looking for ppa.o which I
don't find on my Debian 2.0 r3 CD. Not in base2_0.tgz and also not in
Contents-i386.gz
Where is this module?
Stef
> If it's not there... then just recompile a new kernel whick supports the
> zip drive.
But I think there was a possibility to sellect it when I installed
Debian. So there should be a way to get that module without compiling
it, shouldn't it?
Stef
> 1. mount -o loop -t msdos drv1440.bin /mnt
> 2. find modules.tgz... ppa.o is there.
That's exactly the answer I was looking for.
Thanks a lot!
Stef
> 1. mount -o loop -t msdos drv1440.bin /mnt
> 2. find modules.tgz... ppa.o is there.
Zu frueh gefreut: There is no module called ppa.o in modules.tgz for
Debian 2.0 with kernel 2.0.34...
Stef
Once (Debien 1.3.1) I could use my ZIP drive by saying
rmmod lp
insmod scsi_mod
insmod sd_mod
insmod ppa
After I installed Debian 2.0, ppa.o was not there any more. Now I
installed kernel 2.2.5. So ppa.o is there again, but not the other two
modules above. If I just say
insmod ppa
I get:
/lib
> I'm using kernel 2.2.7 on slink. My Zip (parallel) drive works perfectly
> and so does the printer. I don't use modules at all. The 2.2.* kernel
> series allows you to have multiple parallel support.
But how do you use it? When I try do mount /dev/sda4 I just get
mount: the kernel does not rec
> Did you compile support for the parallel port and for the correct type of
> Zip drive -- ppa or imm?
No, since I use kernel 2.2.5 comming from potato. There is however a
ppa module comming with that kernel, but I can_t just say insmod ppa,
because then I get a device or ressource bussy error.
S
> Try modprobe ppa.. Chances are you have conflicting IRQs. Look at your
> /proc/interrupts and make sure everything is "correct". Make sure you don't
> have ldp running and that you also have removed your lp module. Good luck.
Hm, there shouldn't be any conflicting IRQs, since the ZIP is a
p
> Just modprobe ppa and e-mail the output to this list. There should
> be an interrupt here for your parallel port, and yes, the parallel
> port can have conflicting irqs with other devices. Do that and let
> me see the output.
#> modprobe ppa
/lib/modules/2.2.5/scsi/ppa.o: init
> The only think I can think of is there's another program, more
> specifically a TSR that's running resident in the background causing
> modprobe to report with this error. Are you sure that you don't
> have lpd running in the background and that you have unloaded any
> other possibly conflicting
> Any other suggestions?
OK, I compiled my own 2.2.7 kernel and went through the docu: It
seems, that the module parport_pc was missing and therefore causing
all the trouble...
Thanks for you help!
Stef
Doing apt-get update I get the following error:
Checking system integrity...dependency error
You might want to run `apt-get -f install' to correct these.
Sorry, but the following packages are broken - this means they have unmet
dependencies:
libc6-dev: Depends:libc6
But I just installed libc6_2
> But I just installed libc6_2.0.7.19981211-6.deb
I also installed the newest libc6-dev
This solved the problem.
Stef
I did an update and upgrade with apt-get. While configuring the
packages, apt-get stoped with an error while configuring xemacs. How
can I now configure the rest of the packages?
It's now also impossible to do a telnet to that machine. I checked in
/etc/inetd.conf and saw, that the telnet line was
I encountered some problems while upgrading with apt-get. I ended up
with removing xemacs20, then apt-get update and apt-get upgrade
finished without error. But now some programs are missing. E.g. xterm
and startx.
What could have gone wrong?
Stef
> X has been reorganized. xterm is in its own package and startx is in
> xbase-clients.
Is there a way to get to such vital information without looking up
changes for every installed file or bugging people here on the list?
Don't the xserver packages depend on xbase-clients? If yes, why wasn't
I us XF86_S3V and tried the following:
- Use xlock when X is running
- Change to the virtual console X was started from (using startx)
- Press CTRL-C
This killed X, but also changed the first line in /etc/X11/Xserver from
/usr/bin/X11/XF86_S3V
to
/usr/bin/X11/XF86_NONEV
which I had to change
I have the following problem on a Intel PC Debian system I maintain:
For the second time the file system got mounted read only for an
unknown reason. The first time only my personal mailbox file
(/var/spool/mail/me) got corrupted as far as I could see. The second
time, after the reboot fsck.ext2
I use Debian with kernel 2.0.36. All information I can get from the
BIOS of my Intel PC about the parallel port ist, that io is 0x278 and
that the mode is normal (other possible modes: ECP, EPP 1.9 and EPP
1.7). So I say modprobe lp io=0x278. The printer is a HP LaserJet 4P
connected trough a bidir
> I believe it is /dev/lp1=lpt1:. Are you sure you are using the correct
> device ?
Yes, /dev/lp0 should be the correct device. Also I can see the printer
in a way, since tunelp /dev/lp0 only gives specific output if the
printer is connected.
Stef
> Should it? My machines running 2.0.36 are all printing on /dev/lp1
> and that's to LPT1 and 0x378. I'm not sure why you're using 0x278
> in the BIOS (conventionally LPT2).
I changed it to 0x378 and said modprobe lp io=0x378
The device is still /dev/lp0. lp1 and lp2 are still not configured,
and
> which module is loaded for the parallel port? i prefer static kernels but
lp
> from what i can see you would need parport_pc loaded and not parport. and
> for 2.2.x you gotta tell it to support parallel printers in character
> device section of config, again i always do my kernels as much stat
> > The device is still /dev/lp0. lp1 and lp2 are still not configured,
>
> I read these words, but I don't understand what you mean by them.
sos:~# tunelp /dev/lp0
/dev/lp0 using polling
sos:~# tunelp /dev/lp1
/dev/lp1: Device not configured
sos:~# tunelp /dev/lp2
/dev/lp2: Device not configured
Is there a script to change the tool used to display images in the
mailcap file to xv, or must it be done by hand?
Stef
XF86_Mach64 crashed on my system, leaving it in graphics mode. No the
keyboard is blocked and I can't change to a virtual console
anymore. ps aux tells me that the X server is gone. How can I unlock
the keyboard?
Stef
I use Debian with kernel 2.2.x and autofs to automount CD ROMs. What
are the ways to allow a user to unmount and eject the CD ROM without
having to wait until automount has timed out after five
minutes. Probably adding option user to /etc/fstab should do the
trick.
Or is there a better solution?
S
> /dev/hdd /rmd/ziso9660 noauto,user,ro,uid=0,gid=35
I did that.
umount /cdrom/;eject
ejects the automounted CD now.
eject -u
however gives the following error:
eject: CDROMEJECT ioctl failed for `/dev/scd0': Device or resource busy
Why is that?
> A question for you. Are you s
When I do a lookup of Debian packages on debian.org, I get answers like:
Release Quality Package (size)
stable 100% libc6-doc 2.0.7.19981211-5 (0.7k)
Dummy package to ease upgrades from earlier Debian versions.
What does this Quality stand for?
Stef
When I do a ls I get:
host:~/m> ls
file
But ls -la gives:
host:~/m> ls -la
ls: file: Input/output error
total 3
drwx--S--- 3 user group 1024 Nov 3 16:34 .
drwxr-sr-x 28 user group 2048 Nov 3 16:33 ..
I tried rm -rf /home/user/m but this also gives an I/O error:
host:~>
> you try running a e2fsck on it ?
Yes, but it was /home which was always busy, although I stoped every
process I could think of using files in /home. Isn't there a tool to
check which process is using a certain part of the filesystem?
> run e2fsck -c too, i think that is the option to check for
I have Samba running on two machines. I smbmount'ed //host1/myself to
host2:/home/myself/m/host1 and //host2/myself to
host1:/home/myself/m/host2
Then I realized that this causes a loop. Now I cannot smbumount these
shares anymore, yet not even kill -9 the smbd!
Is there no other solution than to
I again have an
ls: n: Input/output error
Now I'm quite sure smbmount is causing these troubles. Anyone
experienced similar problems with smbmount?
Stef
I manually exchanged ImageMagicks display against xv on
/etc/mailcap. But every time I install an application which alters
/etc/mailcap, display is again inserted. How can I prevent that?
Stef
Hi there
I see that suexec comes with apache-common. I wanted to use it with
apache-ssl, so I changed mode of suexec to 4711 and stoped/started
apache-ssl. But suexec does not seem to be recognized. Do I have to
reompile apache (Then why does suexec come with apache-common)? Is
only apache and not
Hello Debian Users,
D Ghost here. I am trying to get advice on a slow modem I have here.
My modem is a best data 56k modem that said 'linux compatable' on the box (ha!)
at any rate, I have it on ttyS3 and when I send commands to it (i.e- minicom)
it has a very slow response. I can send it ATZ stri
Hey Users,
Ghost here.
I have a compile question. I'm compiling gnubile and am running
into a compile problem. A good bit into my make, I am getting an error:
make[2]: Entering directory `/root/gnubile-0.31-pre/src'
gcc -g -O2 -Wall -o gnubile main.o support.o interface.o callbacks.o admin.o
d
D Ghost here.
I have a quick question here.
What is the last rc file to run?
I need to add a modprobe line to load my sound card.
I have the module in /etc/modules but it seems not to load until I do
modprobe cs4232 io-0x534 irq=5 dma=1 dma2=3
Basically, I'm looking for something like rc.loca
D Ghost here,
I've searched and looked for documentation on what sunrpc is and what
starts/stops it in debian. I have checked inetd.conf and it is not started
in there. I want to not run this deamon. How do I "turn it off" ?
:)
Thanks for any info!
Debian Ghost
'space ghost on debian'
Hello Debian Users,
Can anyone tell me if they are using port sentry with potato 2.2 to any success?
I was hoping that there would be a package *.deb for it soon, but it looks like
there is none in the making. Just wondering if this program is difficult to
install.
Thanks,
Debian Ghost.
Hello All,
I am trying to get my crystal 4232 sound card working.
I just recompiled my kernel, but did not see an option for a module of this
type. I have seen one before in the make config, but I can't remember what I
selected to be able to select that to build it in or make a module. I've tried
Hello,
Debian Ghost here.
Trying to get a crystal 4232 based sound card to work.
I have just compiled a new kernel 2.2.15 and run potato 2.2.
For some reason, I did not see the option to choose a module for crystal 4232
sound card in the 'make config'. I've seen one before, but don't know what
op
Hello,
Debian ghost here... have a question about printing via debian.
I ran the magicfilterconfig and set up a laser jet printer on the lan.
I think I have this thing correct, but I get an error when I try to send
anything to the printer.
from printcap:
lp|ljet|Lazer Jet:\
:lp=:sd=/var/sp
Hello All,
Debian Ghost here.
Just set up my printer with magicfilterconf and I seem to still be having a
problem. This is a printer on the LAN and I hope I did this properly. This is
my /etc/printcap file:
lp|ljet|Lazer Jet:\
:lp=:sd=/var/spool/lpd/ljet:rm=156.200.5.30:rp=ljet:lpr_bounc
log, that may help me.
Thank you!
Debian Ghost
> Hello there,
>
> On Sat, 19 Aug 2000, s. keeling wrote:
>
> > On Sat, Aug 19, 2000 at 02:35:52PM -0500, Debian Mail wrote:
> > > Hello,
> > > Debian ghost here... have a question about printing via debian
Hello Stephen and all,
Thanks for the replies...
Printing is still not working yet.
> As Randal Schwartz would say, unnecessary use of cat, for one thing.
What is a better way to test lpr?
> lpr funny
Is there a better print spooler? I take it from the man pages that lpr can't
even print binar
Hi,
Thanks for the reply!
Feel I am getting closer to working, but still can't understand
what I am doing wrong. If lpr can't print binary files (say a photograph)
what else can?
> 1) Check you have lpd running on both machines.
> ps auxw | grep -i lpd | grep -v grep
ghost:~
I installed horde and imp. Both exited during execution of the
postinst script while configuring the MySQL server. So I went trough
the script and made the necessary stuff myself. Now I made a softlink
to /usr/share/horde/imp/ in my public_html folder. When I try to
access this, I get:
Warning
I am trying to compile the apache-ssl-1.3.3+1.29 package. It is
stopping, because it can't find the ssl.h header file. But I can't
find that file in stable when searching on the Debian homepage. Where do I
find the necessary package containing ssl.h and the remaining needed files?
Stef
Hi there
r-base 1.0.0-1 won't configure. First of all, it is complaining:
r-base depends on perl5; however:
Package perl5 is not installed.
But I can't find perl5. Either in stable nor in unstable.
Stef
zlib-bin wants libz1:
zlib-bin depends on libz1; however:
Package libz1 is not installed.
But I can't find libz1 in any of the distributins...
Stef
I moved /usr/doc to /home/doc, since I have more space on the
partition that is mounted on /home. Then I created a softlink to it:
ln -s /home/doc /usr/doc
The problem is now, that some packages (r-base 1.0.0-1 is an example)
store documentation in different locations, and refer to it with
softli
> Is it me or do you have this command the wrong way round. I would have
> thought that
> you wanted:
>
> ln -s /usr/doc /home/doc
Yes, of course!
> I hope this fixes things for you...
No, since I obviously made it the way you suggest, and then I got the
problems I mentioned.
Stef
1 - 100 of 320 matches
Mail list logo
