I recently added some packages and somewhere during the installation I
got a question something like:
"Should I kill XDM"
I said yes and after the installation my X setup was broken.
I think it added xbooks but I don't believe I added xbase again which
I would expect to change everything. It re
enu xMenuPopup
Does anyone know what the cause is? Has anyone else had the problem?
Yours,
Roger
Roger Young,
Philosophy Department, University of Dundee, Dundee, DD1 4HN
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? C
Would someone please explain in words of less than two syllables
just what steps are required to use "dselect" ?? . I have followed
the instructions in the manual at least 20 times so far but it seems
there must be something more than "+ " and "-" involved in
selecting packages to install / unin
First Problem:
I have a Debian 2.1 installation I intend to use purely as a gateway /
router (Intel Pentium 100 / 16Mb / 170Mb HDD) to the point where it will
dialup OK, tells me "Starting pppd at blah blah blah" . then
stops at a blinking cursor and doesn't seem to respond further
I
If you have to use a Windows proxy program, I suggest using Rideway (from
www.itserv.com) instead of Wingate . its a fraction of the cost if you
decide to pay for it and much more straightforward to configure . I have
used it on small LAN's for some years and never had a problem, and at lea
If anyone who is actually involved in writing documentation PLEASE
take this stuff
on board because if even one elementary (to an expert) item is overlooked it
causes
untold frustration to the less experienced !
>If anything, I am swamped with manuals. Sometimes they help,
>
Would someone please tell me where to find info on the following can't
find
anything relevant in HOWTO's or MAN pages or that makes any sense to me
(1) When I ping a remote site . how to stop the stuff ??
(2)When I try to get Lynx working, it initially seems like its looking
for t
Ah that might be it . I used wvdial and don't recall it
asking about
DNS stuff although ifconfig worked like it should and I could ping some
known
IP addresses. I am impressed with the user friendliness of wvdial though,
its a
really pleasant change after all the weird stuff appare
> I think you get this when DNS lookup failed. Check to make sure you
> have DNS addresses set up in /etc/resolv.conf. (man resolv.conf)
>
I think resolv.conf is set right .. first line is just server homepage,
second & third ones are primary & secondary DNS numbers lynx still
not do
Does anyone know of a real basic web browser thats simple
to setup & configure. I am fast running out of patience with lynx
due to its virtually useless documentation and excessively complicated
config file.
I have been following this discussion with considerable interest as
its been my main bone of contention ever since I started trying to
learn unix O/S.
The issue as far as I am concerned, and probably the majority of
newbies .. is one of usable documentation rather than the actual
volume of mat
Some simple english explanation of that "Synopsis" stuff found in most
of the HOWTO's wouldn't go astray either !!!
--- Begin Message ---
Stephan Engelke wrote:
>
> Hi folks,
>
> On Mon, Jul 19, 1999 at 09:57:26PM -0400, Carl Mummert wrote:
>
> > One issue: there is already a lot of document
Would someone please try to enlighten me on how I go about setting a
different subnet for ppp0 & eth0 ?
I have a number of real IP addresses for personal use, and I'm
apparently supposed to use subnet mask 255.255.255.248 with them on my
LAN, but I guess I need to use 255.255.255.0 for the dialup
using netscape with all the known but unsolved crashes and bus errors i
feel like
workin with m$ software...
The difference is Netscape is suited to the majority of computer users
who possess neither the time nor the inclination to wade through reams
of excessively obtuse documentation in the ho
I don't know if this is relevant to the problem at hand but FWIW
the default email client (Outlook Express) in Windows 2000 uses a
completely different format to anything previously used, so that
its near impossible to export messages to any other application,
including Outlook 97 / 98. I haven
Re: [Thanks] Diald auth problem
Resent-Date:
21 Jul 1999 08:03:40 -
Resent-From:
debian-user@lists.debian.org
Resent-CC:
recipient list not shown: ;
Date:
Wed, 21 Jul 1999 10:05:23 +0200
I haven't had time to per
A number of people who have been trying to help me figure out
configuration issues have asked me to email them a copy of this
or that file. Initially I tried copying directly from Debian
to a DOS formatted floppy but for some reason this made the floppy
inaccessible to DOS / Windows. Soemone then
Never seen that with any flavor of unix but it happens all the time with
Windows NT4 or Windows 2000 if you have an AMD K6/2 CPU . I am using
the same CPU with Redhat / Mandrake & Solaris and never had problems
then
but the Debian boxes both have Intel Pentium 100 / 133 so don't know if
Debia
> I gather that first line doesn't do anything of consequence ??
Right.
--
figures .. just like lynx it doesn't do anything of consequence
either :(
whether with OR without that line in "lynx.cfg"
do you think possibly something else could be broken ??
I've tried looking at "nslooku
Thanks Tyler another example of the problems newbies face
with present documentation
- Original Message -
From: tyler spivey <[EMAIL PROTECTED]>
To: Doug Young <[EMAIL PROTECTED]>
Cc: ;
Sent: Thursday, July 22, 1999 1:17 AM
Subject: Re: Mcopy
> its &#x
I think I posted a response to this already, but if not here it is.
>From a newbie point of view, the actual root of the problem
faced by newbies in trying to come to grips with any unix
based operating system is NOT that there is insufficient
documentation ... but rather that there is TOO MUCH,
an
Date:
Wed, 21 Jul 1999 20:02:19 -0400 (EDT)
From:
[EMAIL PROTECTED]
To:
Doug Young <[EMAIL PROTECTED]>
hello,
now i understand the source of your problem. you are trying to use a
copy of lynx found on a distribution copy of linux. just a sugg
Hear hear . hope someone else takes this stuff on board
Date:
Thu, 22 Jul 1999 10:08:46 +1000
From:
"Carley, Jason \(Australia\)"
<[EMAIL PROTECTED]>
To:
"'Nate Duehr'" <[EMAIL PROTECTED]>,
debian-user@lists.debian.org
Good n
9 -0500
From:
Michael Merten <[EMAIL PROTECTED]>
Reply-To:
debian-user@lists.debian.org
To:
Debian Userslist
References:
1
On Thu, Jul 22, 1999 at 10:36:05AM +1000, Doug Young wrote:
> now i understand the
> try:
> STARTFILE:file://localhost/usr/doc/lynx/lynx_help/lynx_help_main.html
> in /etc/lynx.cfg
>
> This is the default locatuion for the lynx help file.
>
> or make this file to point lynx at:
> <--cut here-->
>
>
>
> This is a dummy page
>
>
> Lynx should be displaying this page I hope
>
>
Subject:
R
Date:
Fri, 23 Jul 1999 11:28:23 +1000
From:
Doug Young <[EMAIL PROTECTED]>
To:
virtanen <[EMAIL PROTECTED]>
References:
1
shudder shudder !
God save us from "e
k you,
Ed
*
Ed Young(303)706-5425
Email: [EMAIL PROTECTED]
Echostar Technology Corporation
Software Engineering
Englewood, Colorado
*
--
Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null
roblem, but security issue. When logging out there's
an option to shutdown. It should, probobly prompt for the root password
before actualy shutdown.
My buddy who runs RH says that kde works quite well "out of the box" on his
SUSE? system.
Is the kde implementation for Debian somewhat
fore.
At least can someone point me the way to those relevant howto's (ppp howto,
mgetty howto, anything else?) and possible packages?
Thanx in advance,
Ed
*
Ed Young(303)706-5425
Email: [EMAIL PROTECTED]
Echostar Technology Corpora
I may be out to lunch on the following but I believe we're zeroing in on
something anyway. That's what lists are all about, right?
One thing I've gotten out of the thread is that RH and SUSE, (etc) are not
adhering to standards but have the market share. Therefore comercial apps
provide distribu
oaded right into bo.
Does anyone still have the tar ball for this lite version? I'd like to try
it out.
Thanx,
Ed
*****
Ed Young(303)706-5425
Email: [EMAIL PROTECTED]
*
--
Unsubscribe? mail -s unsubscr
I'll be taking a digital hardware design class soon and am wondering if
there's any VHDL design software available for Linux.
Open Source, free, or otherwise.
Ed
--
Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null
I installed kdebase, kdeutils, kdegraphics, etc, by finding the packages at
the debian website. I installed and it works, but there are some problems
related to permissions, and most problematic, there are many missing help
files.
How do I figure out whether I have kde 1.0 or a beta?
What is
I'll bet this has been covered, and I feel shame for not knowing and not
being able to find out how, but
How do I create a custom boot disk? Is there a utility, or just a sequence
of steps?
Thanx,
Ed
dists/frozen/contrib
and then run ONLY:
ACCESS
UPDATE
INSTALL
Without running
SELECT
In order to install what is necessary for the upgrade. Once that is done, I
can rerun deselect and install whatever new and exciting stuff I find.
Is this correct?
Ed
*
Ed
bout the
system.
Thanx in advance,
Ed
*****
Ed Young (303)706-5425
NL7FU
[EMAIL PROTECTED]
[EMAIL PROTECTED]
Echostar Technology Corporation
Software Engineering
Denver, Colorado
*
--
Unsubscribe? mail
realy dangerous, I'm inclined to just run ACCESS,
UPDATE, and INSTALL if you think that's OK. Although I've been using Debian
since 1.2 I still feel a little on the whole package methods.
Thanx again,
Ed
*****
Ed Young (303)
me of this...
Thanx again for the help.
Ed
*
Ed Young (303)706-5425
[EMAIL PROTECTED]
Software Engineering
Echostar Technology Corporation
Denver, Colorado
*
> -Original Message-
> From: Bob Nielsen [SMTP:[EMAIL PROTE
e is to be
installed, emacs in this case.
Ed
*****
Ed Young (303)706-5425
[EMAIL PROTECTED]
Software Engineering
Echostar Technology Corporation
Denver, Colorado
*
> -Original Message-
> From: B
e to try it as long as it will coexist with GNU Emacs.
Any comments or caveats or experiences here?
My priorities:
Emacs (of some variety)
X
AX25Utils.
I also need to be able to compile and do some code development.
Thanx,
Ed
> Subject: Re: autoup.sh + deselect broke emacs
>
>
Forgive me if this has been discussed or run into the ground. I only
recently subscribed.
I don't fully understand this release. This is a beta of 2.0 and is called
frozen, but isn't it always being added to and tweaked? Frozen implies that
it will not be further changed, but if I get a CD of 2.
***
Ed Young (303)706-5425
[EMAIL PROTECTED]
Software Engineering
Echostar Technology Corporation
Denver, Colorado
*
--
Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null
nd the announce list and haven't seen anything
about the 2.0 moving from beta to full release ('0fficial 2.0').
Have I missed something?
Thank you,
Ed
*****
Ed Young (303)706-5425
[EMAIL PROTECTED]
Software Engineering
Ech
as had a similar situation or experience comment?
Thanx,
Ed
*****
Ed Young (303)706-5425
[EMAIL PROTECTED]
Software Engineering
Echostar Technology Corporation
Denver, Colorado
*
--
Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null
3 Jan 1999 10:01:11 -0700 (MST)
From: Ed Young <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: [EMAIL PROTECTED]: Testing offline composing]
Mime-Version: 1.0 (generated by tm-edit 7.106)
Content-Type: text/plain; charset=US-ASCII
vcard
fn: Gary Young
n: Young;Gary
org:Motorola SPS IT
adr:Motorola Piedmont Office - Cube 41D;;9801 South 51st Street;Phoenix;AZ;85044;USA
email;internet: [EMAIL PROTECTED]
tel;work: 480-383-5411
x-mozilla-cpt: ;0
x-mozilla-html:
the Debian 2.1 resc1440-safe.bin
image, and it fails at the same point.
Some change between the kernel in Debian 2.0
and in Debian 2.1 fails on something in my
hardware. I'll look at what hardware is
in the box next.
Garybegin: vcard
fn: Gary Young
n: Y
00129ad3>] [<0012a56c>] [<0012a645>] [<00130c2d>]
[<0010ac15>] [<00121550>] [<00120018>] [<00210018>] [<001097fa>]
[<00109512>] [<00109519>] [<0010976c>]
Code: 81 39 aa ff 55 00 0f 85 23 01 00 00 8b 41 04 89 43 04 8b 43
I am using the Linux C
ist, the debian-users
archives, the www.hp.com site, and such without any
luck.
Thanks in advance,
Gary Youngbegin: vcard
fn: Gary Young
n: Young;Gary
org:Motorola SPS IT
adr:Motorola Piedmont Office - Cube 41D;;9801 South 51st Street;Phoen
onfig --version.
If I'm installing the wrong packages, which ones do I need?
I upgraded using apt-get update, apt-get install libgtk1.2. I then did a
full dist-upgrade with apt-get dist-upgrade and got the same result...
Thanx in advance,
Ed
--
******
Ed Youn
Hi all,
I have a very strange problem. I'm trying to upgrade ssh on a potato
box, but dpkg always exits with the following error:
# dpkg -i ssh_1%3a3.4p1-0.0potato1_i386.deb
(Reading database ... 35706 files and directories currently installed.)
Preparing to replace ssh 1:1.2.3-9.4 (using ssh_
Am in the process of getting a new box up & running. Am wondering if
there is a "simple" (relatively so) x manager that I can use. I plan to
be at the clinic 3rd sat this month with the new unit and -hopefully-
some stuff to load onto it. Thanks in advance, Dennis
On Mon, 31 Mar 1997, Jim Sm
Can anyone point me to a set of tools to create custom Debian boot disks to
automate installation (via packages or an NFS image), maintain the custom set
of packages/image, maybe combine all of this with a subset of the Debian CD and
create a bootable CD version?
--
[EMAIL PROTECTED]
"Colquhoun, Ian:" wrote:
>
> First let me apologize for the seemingly basic question but I have exhausted
> all the documentation on apt and I don't know where else to turn.
>
> What I'm trying to do is to get apt-get to work through a SOCKS firewall.
> Now, I basically know nothing about SOCKS
Attn: to all great programmers out there..
Hoping that somebody please help me out with this problem?
sum()
{ for x=1 to 10 do
var=var+1
}
shared int var=0 //shared variable
fork(sum, 0);
fork(sum, 0); //executing two concurrent processes
I can't figure this one out...my questions are:
recently installed xfree86-4. now when I try to
start x I get:
waiting for X server to begin accepting connections
..
...
.
and so on...What else do I need to do?
tia
pls cc me since I'm not in the list
___
Visit http:
is working the way it was.
Any ideas?
--
Niall Young
Linux Solutions -- www.linuxsolutions.net.au
Providing Internet and Audio/Video Solutions and Consulting
PH: 0407 421 5
howdy,
I know fdqn is fully qualified domain name but what is it's "relevance"? esp.
in apache...I want to setup an apache server in my local network (for practice
:)) but I get an error telling me that apache can't find my fqdn and it uses my
loopback address instead...
is it possible to set
s how to do this I'd really appreciate it...
-Original Message-
From:Mark Lamers [EMAIL PROTECTED]
Sent:28 Aug 2001 13:32:26 +0200
To: [EMAIL PROTECTED]
CC: debian-user@lists.debian.org
Subject: Re: simple q: what is fqdn?
On di, 2001-08-28 at 10:17, michael y
Hello
which consumes lesser memory...galeon or netscape?
also, is there a fix already for the "bug" in galeon (more on mozilla actually)
as the archives suggest...?
pls tell me
Gdk-WARNING **: Missing charsets in FontSet creation
Gdk-WARNING **: ISO8859-1
___
i know i know...but i still would like to use it. i have telnetd installed,
hosts.allow and deny dont have anything in them, /etc/inet.d shows telnet
running bec. telnet works when the hostname/eth0 ip is used but not with the
inet addr... I would like to telnet to work over the internet even if
Hi,
I have a Mustek 1200 UB USB scanner. How can I get it to work with
Debian 2.2r2? I have successfully installed the USB module and it is
loading correctly upon booting. I suspect that the appropriate device
has not been created in /dev, but I don't know what it is supposed to be
called.
I al
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
I noticed that there are several members PGP-signing their postings.
However,
the signature is MIME-formatted and appears as an attachment in my mail
client,
Netscape Messenger. Because there is no built-in PGP function, I am
forced to
copy/paste
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi everyone,
When I execute 'apt-get update; apt-get dist-upgrade', nothing seems
to happen. apt-get reports back that the packages are up-to-date. I
am pretty sure that they are not because before it was asking me to
update some GNOME libraries and o
GET your U N IVERSI T Y D I PL0M A
Do you want a prosperous future, increased
earning powermore money and the respect of all?
Call this number: 1-315-546-9663 (24 h ours)
There are no required tests, classes, books, or
interviews!
Get a B a chelors, Masters, M BA, and D o ctorate
(
Hi All,
I've seen a number of 'HOWTO' documents on installing Debian on
Compact Flash, but most of the ones I've seen deal with installing
it once, and using stable.
Has anyone had any experience with using Sid, -and- keeping it
up to date with apt-get update and apt-get upgrade regularly ?
How
Here is the bug info
```
GNU Image Manipulation Program version 2.10.8
git-describe: GIMP_2_10_6-294-ga967e8d2c2
C compiler:
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/8/lto-wrapper
OFFLOAD_TARGET_NAMES=nvptx-none
OFFLOAD_TARGET_DEFAULT=1
Target: x86_64
hearing from you.
Best regards,
Carol Young
Marketing Specialist
Hello,
I have bitnami/mysql container (debian OS) running on kubernetes.
This container seems too restricted for system software, these following
commands are removed:
sudo (so I can't su to root for apt)
ping
dig
nslookup
net-tools
Do you know any other way to resolve a hostname by manual on t
Hello,
Do you know why my alias can't work in the bash script?
The info is as follows.
1) this alias does exist
$ alias |grep 'k='
alias k='minikube kubectl --'
2) it also exists in .bash_profile
$ cat ~/.bash_profile |grep 'k='
alias k="minikube kubectl --"
3) the content of bash script
e network. To solve this problem, you can do that:
> Create a pod in the same network with net tools.
> Or
> 1 .rebuild a new docker image with another version, with net-tools.
> 2. then change the current pod with edit in deployment.
>
>
>
> On Fri, Mar 3, 2023 at 9:59
On Sat, Mar 4, 2023 at 5:53 PM David wrote:
> On Sat, 4 Mar 2023 at 19:30, Ken Young wrote:
>
> > Do you know why my alias can't work in the bash script?
> > The info is as follows.
> >
> > 1) this alias does exist
> > $ alias |grep 'k='
&
Hello,
The methods I know,
1. scp
pros: the native tool in the OS
cons: you will either input password or put key pairs into servers for
authentication.
2. rsync
pros: it can transfer data by increasement
cons: you need to setup rsyncd server and make the correct authorization.
3. ftp/ftps
pros
What provider do you recommend then?
Sincerely,
Ken Young
On Sun, Mar 5, 2023 at 6:54 PM wrote:
> On Sun, Mar 05, 2023 at 11:31:42AM +0100, Michel Verdier wrote:
> > Le 5 mars 2023 tomas a écrit :
> >
> > > The others I'd only use when forced to. Well, rclone, I
Is perl6 production ready?
I have not used perl for a long time.
Sincerely,
Ken Young
On Sun, Mar 5, 2023 at 7:28 PM Tom Browder wrote:
> My take:
>
> I use aliases heavily in my shell (bash), but I rarely use bash scripting
> at all.
>
> For any serious scripting, sinc
Thanks for the suggestion. I will give it a try on mailbox.org.
Sincerely,
Ken Young
On Sun, Mar 5, 2023 at 9:05 PM wrote:
> On Sun, Mar 05, 2023 at 07:23:49PM +0800, Ken Young wrote:
> > What provider do you recommend then?
>
> Around here (West Europe), for example, mailb
% /dev
tmpfs98M 496K 98M 1% /run
/dev/vda1 9.7G 1.5G 7.9G 16% /
...
So I want to add a block device /dev/vdb and fdisk/format it and mount it
as /home dir.
Since /home already exists (even have data in this path). can I mount it
without problem?
Sincerely,
Ken Young
The provider has separated block device service, like what Ceph does.
So I have to buy another 100GB block device as the secondary disk.
Sincerely,
Ken Young
On Mon, Mar 6, 2023 at 6:26 AM Andy Smith wrote:
> Hi,
>
> On Mon, Mar 06, 2023 at 03:11:43AM +0800, Ken Young wrote:
>
That's smart. Thanks
Sincerely,
Ken Young
On Mon, Mar 6, 2023 at 3:43 AM Linux-Fan wrote:
> Ken Young writes:
>
> > Hello,[1;5B
> >
> >
> > The methods I know,
> >
> > 1. scp
> > pros: the native tool in the OS
> > cons: you w
For standalone backup I am using Liteserver's VPS, 512G disk for only 2.4
EUR/m.
Then I setup rsyncd on it, and rsync data from clients via crontab for
backup purpose.
Sincerely,
Ken Young
On Tue, Mar 7, 2023 at 9:21 AM Celejar wrote:
> On Sun, 5 Mar 2023 14:05:37 +0100
> to...
Hello
For debian 11, service is just a wrapper to systemctl, is it right?
So for server management, both commands below have the same results.
sudo service nginx start
sudo systemclt start nginx
Which way is more prefered though?
Thanks.
--
Sincerely,
Ken Young
For some reason debian installed X with a really low resolution so I'm
trying to increase my screen resolution from 800x600 to something
like 1024x768.
I tried running dpg-reconfigure xserver-xfree86 and it returned
immediately without doing anything.
What is the procedure for reconfiguring my
I'm trying to access the parallel port (/dev/lp0) from a non root process. Basically I have a program that can only access the port if it runs as root. Here's what happens when I run as root:[EMAIL PROTECTED]:~/src/k74-
1.0# ./pprxtx all set[EMAIL PROTECTED]:~/src/k74-1.0# ./pprxtx read255[EMAIL PR
ep 2006, Ed Young wrote:> I'm trying to access the parallel port (/dev/lp0) from a non root process.
>> Basically I have a program that can only access the port if it runs as root.>> Here's what happens when I run as root:> [EMAIL PROTECTED]:~/src/k74-1.0# ./pprxtx al
I installed gcc 4.3 using Synaptic, and the process seemed to have
succeeded. However, when I enter the gcc -v command, I get a "bash:
gcc: command not found error".
Is there additional configuration to be done beyond the package install?
Thanks.
--
To UNSUBSCRIBE, email to debian-user-requ
On Thu, August 27, 2009 7:48 pm, Celejar wrote:
> On Thu, 27 Aug 2009 19:18:28 -0500 (CDT)
> "David Young" wrote:
>
>> I installed gcc 4.3 using Synaptic, and the process seemed to have
>> succeeded. However, when I enter the gcc -v command, I get a "b
28 -0500 (CDT)
>> > "David Young" wrote:
>> >
>> >> I installed gcc 4.3 using Synaptic, and the process seemed to
>> have
>> >> succeeded. However, when I enter the gcc -v command, I get a
>> "bash:
>> >> gcc: comma
On Fri, August 28, 2009 8:52 am, Sven Joachim wrote:
> On 2009-08-28 02:18 +0200, David Young wrote:
>
>> I installed gcc 4.3 using Synaptic, and the process seemed to have
>> succeeded. However, when I enter the gcc -v command, I get a "bash:
>> gcc: command not
On Fri, August 28, 2009 9:14 am, Sven Joachim wrote:
> On 2009-08-28 16:07 +0200, David Young wrote:
>
>> On Fri, August 28, 2009 8:52 am, Sven Joachim wrote:
>>> And please refrain from hijacking threads in the future. When you
>>> have
>>> a problem
I'm having the example same problem after my upgrade from Lenny to Squeeze
With SSL on this just gives me "Internal Server Error" without writing to the
logs:
ErrorDocument 404 default
DAV svn
SVNParentPath /var/www/usvn-1.0/files/svn
SVNListParentPath off
Greetings.
I have successfully installed debian (buster) on my ASUS UX430U and have
been using it for around one month without any severe problems. There are
however, some minor issues, that I would like to share with the community.
(This notebook does not appear on debian's supported hardware lis
Package: Pitivi
Version: 0.95-1+b1 amd64
Debian Version:testing
X11:xfce
Linux debian 4.5.0-2-amd64 #1 SMP Debian 4.5.4-1 (2016-05-16) x86_64 GNU/Linux
When I run pitivi and click new button,It can't create new project and
pitivi run over.
When I run pitivi on shell, shell print error code.
Title: Message
I can't get X to start because apparently
because the mouse device can't be found, though the device directory entry seems
to be there:
Falcon:/etc/X11# ls -la
/dev/input/micecrw-rw 1 root root 13, 63 2005-02-25 23:43
/dev/input/mice
The Mouse is a standard PS/2.
I'm
(**) Configured Mouse: Buttons: 5
(II) XINPUT: Adding extended input device "Configured Mouse" (type:
MOUSE)
(II) Configured Mouse: ps2EnableDataReporting: succeeded
So when I added the mousedev module, X will run, but the mouse doesn't
work?
Any ideas?
Thanks,
Ed
-Original Me
I did a new install of Debian 3.1r1 and X failed out with a
/dev/input/mice no device found error.
I issued modprobe mousedev and then startx got x running, but the mouse
still doesn't work.
I added mousedev to /etc/modules and now when I reboot, X starts but
still no mouse.
I've run dpkg-rec
-
From: Juergen Fiedler [mailto:[EMAIL PROTECTED]
Sent: Wednesday, January 11, 2006 3:06 PM
To: Ed Young
Cc: debian-user@lists.debian.org
Subject: Re: New install->Broken X->modprobe mousedev->now X Works, but
no mouse
On Wed, Jan 11, 2006 at 02:31:40PM -0700, Ed Young wrote:
>
>
Title: Message
I'm very confused.
Where does the XF86Config-4 file live? I thought it was in /etc/X11.
I also thought that
dpkg-reconfigure xserver-xfree86 was supposed to create a new XF86Config file.
I did an experiment.
I deleted (saved elsewhere) the XF86Config-4 file and tried to
Thanks everyone for helping lead me to the solution.
I had two problems:
1.I needed to change the mouse to /dev/psaux and specify PS/2 and
2. I wasn't updating the XF86Config-4 file ( I had read the note below
but misinterpreted it )
I had been changing the config but didn't realize that it wa
Title: Message
I have a Dlink
DWL-G510 that works find under Windows XP (dual boot). I'm trying to get it to
work with Debian 3.1r1.
I'm following the
instructions at
http://www.linuxquestions.org/linux/answers/Networking/ndiswrapper_on_Debian_Sarge_without_having_to_compile_anything
Af
Title: Message
I have a Dlink
DWL-G510 that works find under Windows XP (dual boot). I'm trying to get it to
work with Debian 3.1r1.
I'm following the
instructions at
http://www.linuxquestions.org/linux/answers/Networking/ndiswrapper_on_Debian_Sarge_without_having_to_compile_anything
A
1 - 100 of 154 matches
Mail list logo
