bogomips ?

Hi. A little question: programme `linux_logo' show 1264.84 Bogomips Total on my system, but `bogomips' - 634.00 BogoMips. Why do these values be different? Thanx. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Sensors on VIA mayherboard.

Hi folk. I have matherboard on VIA VT82C686a & VT82C694Z chipsets. I want to monitore my hardware. Thanks Hugo Graumann from debian-user maillist I have built lm-sensors & i2c modules. When i try sensors-detect I have results: #cut here

mplayer & motherboard with i810 chipset.

Hi folk. I have problems with using mplayer on motherboard on i810 chipset. I use mplayer 0.90rc4 & kernel 2.4.20 & XFree86 4.2.1.1 When I try to use xv or sdl codec I hev only blue image. Mplayer work only with x11 codec but with that I cannot fulscreen. Anybody have any ideas how can use xv or s

KNOPPIX and it configure.

Hi folk. I want to use KNOPPIX for create my LaTex documents. But I can not reconfigure LaTex distributive because files of tetex are on CD. Can I do this. (Now I need reconfigure hyphenations). Thanx. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Cont

VIA & AGP & mystery

Hi folk. I have motheboard on via chipset (Via Apollo Pro 133Z). And I have AGP video card. My kernel is 2.4.20. I compile it with support agp, but I cacnnot use agp - this is from dmesg command: Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 321

Unresolved symbols in ... & alsa

Hi folk. I compile alsa module and try install it. When I do dpkg -i alsa-modules-2.4.20_0.9.0rc7-2_i386.deb I have: Configuration file for ALSA 0.9 exists. Attempting to start. depmod: *** Unresolved symbols in /lib/modules/2.4.20/alsa/snd-emu10k1-synth.o depmod: *** Unresolved symbols in /lib/mo

Mystice user.

Hi. What I have: $ w 12:04:29 up 85 days, 1:32, 2 users, load average: 0.00, 0.00, 0.00 USER TTY FROM LOGIN@ IDLE JCPU PCPU WHAT egor pts/0orion.mao.kiev.u 11:380.00s 0.16s 0.01s w $ who am i egor pts/0Mar 18 11:38 (leo) $ who egor pts/0

Problems. May be xterm from XFree86 4.3 ?

Hi folk. I install XFree86 4.3 version from http://people.debian.org/~mmagallo/packages/xfree86/i386 and now I have problems - X resetup when I try load xterm. What I have in log: (I do not know who is culprit: kernel or XFree) Mar 23 08:13:34 pupkin kernel: printing eip:

Re: scsi emulation: atapi reset irq timeout and other nasties...

Hi folk. > scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 In > quiry 00 00 00 ff 00 hdc: irq timeout: status=0xd0 { Busy } > hdc: DMA disabled > hdc: ATAPI reset complete > hdc: irq timeout: status=0xd0 { Busy } > hdc: ATAPI reset complete > hdc: irq timeout: status=

Strange behaviour of NFS.

Hi folk. Sometimes I see messages when use NFS: nfs_statfs: statfs error = 5 nfs: server pupkin not responding, timed out nfsd: last server has exited nfsd: unexporting all filesystems When I try copy any file to NFS-machine I see: $ cp qqq.tar.gz /export/nfs/temp/. cp: writing `/export/nfs/temp/

Re: X problems, likely vertical refresh

Hi Matthew. I have ATI All-in-Wonder Pro AGP card and I use driver from GATOS for XFree86 version 4.1.x. This driver works fine for me (XVideo, TV tuner ...) <>

/etc/shutdown.allow & user

Hi. I read man for `shutdown' command. And this man describe how permit any user using shutdowning. Need create /etc/shutdown.allow and list of peaples that can use `shutdown'. I create it and now do from user /sbin/shutdown -a -r now -- but I cannot reboot. Only root can do this. What I do incorr

problem with xlibs?

Hi folk. I have this when compile some programme: /usr/X11R6/lib/libX11.a(XlibInt.o): In function `_XEventsQueued': XlibInt.o(.text+0x76c): undefined reference to `pthread_equal' XlibInt.o(.text+0x786): undefined reference to `pthread_equal' XlibInt.o(.text+0x7a1): undefined reference to `pthread_

Re: problem with xlibs?

Hi. > > I have this when compile some programme: > > > > /usr/X11R6/lib/libX11.a(XlibInt.o): In function `_XEventsQueued': > > XlibInt.o(.text+0x76c): undefined reference to `pthread_equal' > > XlibInt.o(.text+0x786): undefined reference to `pthread_equal' > > XlibInt.o(.text+0x7a1): undefined refe

nfs: task 865 can't get a request slot. What is this?

Hi. I see messages in log's: client1 kernel: nfs: task 865 can't get a request slot and sometimes: client1 kernel: nfs: server carter not responding, still trying client1 kernel: nfs: server carter OK I mount nfs disks form "carter" to "client1" with next option: defaults,rsize=8192,wsize=8192,sof

How do rip out pictures from PDF file?

By analogy with psrip. Thanx! -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Use many graphics in LaTeX document. Configuration files of LaTeX.

Hi Debian community! I have little quesion about usage of LaTeX. I want to place very many graphics in my doc , but when translate the tex file in dvi and ps, I see that my graphics place on end of file. What should I do that my graphics place correct . I use graphicx package and \begin{figure}[h

ATI video All-In-Wonder & TV

Hi. I have ATI 3D Rage Pro AGP 1X/2X based on bt829 chip. What driver should I use in order to see TV? I have 2.4.19 kernell. Who have such card and who use TV? I try GATOS but it do not work in my. Does BTTV driver work with this chip? Thanx. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] w

Re: Use many graphics in LaTeX document. Configuration files ofLaTeX.

Sorry. I have next document in tex: \documentclass[12pt]{article} \usepackage{graphicx} \begin{document} ... some text 4 pages ... \begin{figure}[h] \includegraphics[some_options]{file1.ps} ... \end{figure} ... some text 5 pages ... \begin{figure}[h] \includegraphics[some_options]{file2.ps} ... \e

from GIF to PS

Hi All. How can I convet gif file to postscript file? Has Debian any utils? Thanks. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re[2]: from GIF to PS

> On Tue, Nov 19, 2002 at 03:57:45AM +0200, Egor Tur wrote: > > Hi All. > > How can I convet gif file to postscript file? > > I use: > > cat file.gif | giftopnm | pnmtops > file.ps > > You need netpbm. I just checked: It's available. >

logrotate & his config file.

Hi folk. I want that `last' does login on year but not month . I think that I need rewrite /etc/logrotate.conf. But what have I write in this file. `man' told me about only monthly, weekly & daily. Thanx. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble?

Problem with mount floppy

Hi folk! Now I see this message: /dev/fd0: Input/output error mount: block device /dev/fd0 is write-protected, mounting read-only when I do `mount /floppy' and I can only read data on floppy but cannot write. What 's happened? How can I solve this problem? Thanks. -- To UNSUBSCRIBE, email to [EM

Re[2]: Problem with mount floppy

> > Hi folk! > > Now I see this message: > > /dev/fd0: Input/output error > > mount: block device /dev/fd0 is write-protected, mounting read-only > > when I do `mount /floppy' and I can only read data on floppy but cannot > > write. What 's happened? How can I solve this problem? > > Have you chec

Re[4]: Problem with mount floppy

Hi folk! > >> > Now I see this message: > >> > /dev/fd0: Input/output error > >> > mount: block device /dev/fd0 is write-protected, mounting read-only > >> > when I do `mount /floppy' and I can only read data on floppy but cannot > >> > write. What 's happened? How can I solve this problem? > >> >

Re: VT82C686B Sound Problem

Hi Robert. > I have a MSI KT7 Pro2-A motherboard with a vt82c686b chipset. It has an > onboard sound card. I've been trying to get the sound to work, but > without any success. I'm running a 2.4.19-386 kernel on a "testing" > distro. I tried the vt82cxxx_audio.o driver without any luck, so I

xdm & xearth on root

Hi. I canon start xearth with xdm. I add /usr/X11/bin/xearth -root -twopix -ncolors 32 -night 4 -wait 120 & in /etc/X11/xdm$ /etc/X11/xdm/Xsetup but I see only login invitation. Thanx. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROT

Re: xdm & xearth on root

Sorry Folk. I was not attentive. > I canon start xearth with xdm. > I add > /usr/X11/bin/xearth -root -twopix -ncolors 32 -night 4 -wait 120 & ^ /usr/bin/X11/xearth !!! > in /etc/X11/xdm$ /etc/X11/xdm/Xsetup > but I see only login invitation. > Thanx. Sorry. -- To UNS

Xfree86 4.2.1-3& XKB, problem.

Hi. I install Xfree86 from testing and I have problem with XKB - I cannot switch any keymap & keyboard. I see when start X: Couldn't load XKB keymap, falling back to pre-XKB keymap Does anybody have an idea on how to resolve this? Thanx. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a sub

Re: Problem with mount floppy

Hi. >> > >> > Now I see this message: >> > >> > /dev/fd0: Input/output error >> > >> > mount: block device /dev/fd0 is write-protected, mounting read-only >> > >> > when I do `mount /floppy' and I can only read data on floppy but cannot >> > >> > write. What 's happened? How can I solve this proble

GV & full screen

Hi Folk. I want to use gv with full screen without panel ans menu. How can I do this? Is it possible? Does anybody have an idea on how to resolve this little problem? What is there last version of gv on free access? Thanx. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubsc

Re: mounting floppies

> This line is probably already in your /etc/fstab. You should also be a > member of group "floppy". >My /etc/filesysytems > vfat > minix Strangely. I did not found /etc/filesystems on my Debian Woody & Sarge. What package contains this file? Thanks. -- To UNSUBSCRIBE, email to [EMAIL PROTE

Swithing mode resolution on Xfree86

Hi filk. I have 3 mode in my XF86Config-4: 1024x768, 800x600, 640x480. Default is 1024x768. When I swith between mode (Ctrl+Alt+[+-]) I have the virtual desktop. Are there any way that I have not this virtual desktop but I have only desktop with swithing mode of resolution. Thanks. -- To UNSUB

ld & ld.so.conf

Hi folk. When I compile programs: $ g77 -o file -O file.f -lX11 I see: $ /usr/bin/ld: cannot find -lX11 $ collect2: ld returned 1 exit status But $ cat /etc/ld/so.conf: $ /usr/X11R6/lib When I do: $ g77 -o file -O file.f -L/usr/X11R6/lib -lX11 this OK. I try: $export LD_LIBRARY_PATH=/usr/X11R6/lib

Cannot log in with xdm.

Hi folk. I (and other user, even new added user) canot login when I start xdm, only root can login. When anybody login from console - OK. How can I solve this? Thanx. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: sound card on intel board not work, please help

>I had intel D845PESV , come with AC97 and eeproLAN, both all not work > in 2.4.20 . like AC97, I put it in /etc/modules > > reboot it still have no sound(I assume gnome will have sound at login > and logout as end user) > > please help on that, actually in windowXP I also have no osund, I > r

Re[2]: sound card on intel board not work, please help

Hi. > >> I had intel D845PESV , come with AC97 and eeproLAN, both all not work > >>in 2.4.20 . like AC97, I put it in /etc/modules > >> > Both my audio and Lan are enable on the Bios SV84510A.86A.0008.P04 come > with that intel board > no sound > please help Please read http://www.intel.com/

proftpd in log.

Hi. I have message in log: Dec 9 17:21:15 pupkin proftpd[2346]: connect from 198.168.5.10 Dec 9 17:21:15 pupkin proftpd[2346]: No certificate files found! Dec 9 17:21:30 pupkin proftpd[2346]: pipkin.ineta.net (GMS[198.162.5.9]) - FTP session opemed Dec 9 17:2

Animate png images.

Hi folk. Is there any programme for manipulate png images, for example animate *.png from many frames? How gifsicle for manipulation *.gif images. Thanx. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Debian package from other orig.tar.gz

Hi folk. I want to build package from source but with other orig.tar.gz. What can I do? Can I do change dsc file? md5sum? Thanx. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Strange work XFree86 with depth 8 bit on 4.x version.

Hi folk. I have programme which works only 8 bit X server. I try run this on XFree86 version 4.3 4.2 4.1 3.3 This prog. work only computer with ATI video card under all XFree86 version. With S3, intergated i810 video card I cannot run this. What i do: Run only X server with depth 8 and without any

I cannot build kernel_xxx packages by make-kpkg.

Hi folk. I have problem with build kernel_image. I try kernel-source-2.4.20 from testing & unstable; kernel-package and modutils from testing & unstable & stable; Errors are when make-kpkg try build package: find kernel -path '*/pcmcia/*' -name '*.o' | xargs -i -r ln -sf ../{} pcmcia if [ -r Sy

Re: I cannot build kernel_xxx packages by make-kpkg.

Hi folk. > > I have problem with build kernel_image. > > I try kernel-source-2.4.20 from testing & unstable; kernel-package and modutils > from testing & unstable & stable; > > > > Errors are when make-kpkg try build package: > > > > find kernel -path '*/pcmcia/*' -name '*.o' | xargs -i -

How make transparent loggin menu in XDM?

Many thanx. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Depth for X. How choose colormap?

Hi folk. I have some programme. When I run it with X with depth 8, I see error: Cannot allocate colormap entry for "gray" Cannot allocate colormap entry for "yellow2" ... and this program don't work correctly. When I run it with -depth 16 or 24 I don''t see these messages and gui work correctly. Wh

Question about colormap under X again.

Hi folk. I have problem with colormap under XFree86 and depth 8bpp. I have programe which work only with depth 8bpp. When I try to use it with depth 8bpp I see messages: Warning: Cannot allocate colormap entry for "gray77" Warning: Cannot allocate colormap entry for "#7c8498" ... And this programe

Who have S3TrioV2/.. video card, which work under X version 4.2. ?

Hi folk. Who have S3TrioV2/.. video card, which work under X version 4.2. I can only use X with resolution 640x480 and depth 8. Are there other drivers for this card that work under X (4.1.., 4.2..)? Tnanx. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble?

Xnest under X. Question.

Hi. I want to setup Xnest with depth 8 under X with depth 24. When I try do this I see messages Fatal server error: Unable to find desired default visual. Ok. I see man Xnest and I see that this must work. xdpyinfo show me that I have number of visuals:4 and next visual classes TrueColor

Small theme for wmeker.

Hi. Who have the very small theme for wmeker without background and other big gradient. I want to use that theme under X with depth 8. Thanx. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Agpgart, VIA motherboard and ATI RAGE PRO 1X/2X video card.

Hi. I have motherboard on VIA chipset (via vt82c866a). Video card ATI Technologies Inc 3D Rage Pro AGP 1X/2X. And I see message when system setup: Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 203M agpgart: Unsupported Via chipset (device id: 06

hdc: [PTBL] [2495/255/63] hdc1, what is PTBL?

Hi. I see when my system boot up: hda: 19932192 sectors (10205 MB) w/426KiB Cache, CHS=1240/255/63, UDMA(66) hdb: 44150400 sectors (22605 MB) w/1966KiB Cache, CHS=2748/255/63, UDMA(33) hdc: 40088160 sectors (20525 MB) w/1961KiB Cache, CHS=39770/16/63, UDMA(33) Partition check:

network block device and cdrw.

Hi. I want to share cd-rw device on local net. I try use nbd but I see error messages: I try share /dev/sdc1 device on port 1234 on nbd-server - Starting Network Block Device server:Error: bind: Address already in use /dev/scd1 nbd-server. On nbd-client - Starting NBD client process: Connecting.

Re[2]: hdc: [PTBL] [2495/255/63] hdc1, what is PTBL?

Hi folk, Hi Alvin. > > I see when my system boot up: > > hda: 19932192 sectors (10205 MB) w/426KiB Cache, CHS=1240/255/63, UDMA(66) > > hdb: 44150400 sectors (22605 MB) w/1966KiB Cache, CHS=2748/255/63, UDMA(33) > > hdc: 40088160 sectors (20525 MB) w/1961KiB Cache, CHS=39770/16/63, UDMA

OK. How can I share CDRW on other computers? Or are there GUI that I can share on other computers?

Hi. Who had solved the some problem? Not use ssh. Thanx. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

What about rscsi? webCDwriter?

Hi. rscsi is programme from cdrecord. This lets use cdrw from remote computers. Who use this programe? Do rscsi use rsh? Can rscsi use ssh ? Who has or knowns where get debian package of wedCDwriter programme? This programme starngelly places his files into directories. If I use --prefix= /usr/loc

WindowMaker without icons. How?

Hi folk. How can I get rid of icons in WindowMaker. No icons, no backgraund - only menu and root window from X. Many thanks. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

ssh and run programme in the background.

Hi. If I login remote host on `ssh' and run there program in the backgraound I cannot logout for this host. If I kill my programme I can loggout. If I connect host on `telnet' - I have not this problem, I can logout and programme continue run. Why cannot this work with `ssh'? How resolve this p

bash, expressions, ???

Hi. Who can explain? ps ax | grep lpd 398 ?S 0:00 lpd Waiting 5593 pts/13 S 0:00 grep lpd ps ax | grep [l]pd 398 ?S 0:00 lpd Waiting What do [l]? Thanx. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAI

start another X session on remote computer

Hi folk. I start X from xdm. But I have any programme which I run on session of X that I start form startx from X (use `anybody' parameter for start X). Question: can I start this X session (from startx) on another computer? How can I possibly do it? Thanx. -- To UNSUBSCRIBE, email to [EMAIL

Re: start another X session on remote computer

Hi Thorsten. > > I start X from xdm. But I have any programme which I run on session of X that I >start form startx from X (use `anybody' parameter for > > start X). Question: can I start this X session (from startx) on another computer? >How can I possibly do it? > > I don't understand. Are yo

KDE2 & /etc/profile?

Hi. Why does kde2 not read /etc/profile? At list for me. Who (what :)) and how read this file when system sturt up? Thanx. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Offboard hdd controller.

Hi Folk. I want to use offboard hdd controller and set up cdrom on it. How can I do this? Thanx. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: Offboard hdd controller.

> Hi Folk. > I want to use offboard hdd controller and set up cdrom on it. ^^^ Sorry, ide hard disk controler on isa slot. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: locale & .bash_profile,.bashrc

Hi. May be /etc/invironment I try to put some variables in /etc/bashrc (not /etc/profile - KDE do not use it for me :( ) then this work. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Interest of SMP kernel :)

Hi. $ uname -a Linux pupkin 2.4.19 #1 SMP Mon Sep 16 08:45:01 EEST 2002 i686 unknown I have 2 processors, 256 memory, 256 swap cd /usr/src/linux see Documentation/smp.txt; grep MAKE conf.vars MAKE = /usr/bin/make -j3 time make-kpkg --revision=pupkin.0.6 kernel_image

ssh method in sources.list

Hi Folks! How write the ssh method in sources.list correctly? Thanx. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

ATI RAGE IIC & XFree86 4.1.0-16 & problems

Hi Folks! I have ati rage iIIc graphics controller, 2M memory. I use "ati" driver. Now I have only 800x600 resolution & 24 bit depth. I want to use 1024x768 resolution. How can I possibly do it? I try this resolution with other depth (8, 16, 15) & I hav only black screen. I find DOCs & FAQs in

ATI 3D Rage IIC AGP & Video Memory

Hi. I have ATI RAGE IIc video. In my XFree86.log I found (II) ATI(0): Using 8MB linear aperture at 0xe600 (!!) ATI(0): Virtual resolutions will be limited to 2047 kB due to linear aperture size and/or placement of hardware cursor image area (II) ATI(0): Using block 0 MMIO aperture at 0xE50

What is mmenu?

Hi folk. How can mmenu use? How can I do menu on desktop if window manager don't use it. Thanx. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

alsa & 82801EB AC'97 Audio Controller

Hi folk. I have MB on 865PE chipset. I cannot use audio with alsa driver. What I have: Multimedia audio controller: Intel Corp. 82801EB AC'97 Audio Controller (rev 02) CMI9739 chipset with 6channel CODEC AC97 alsa 0.9.8-1 I compiled alsa-modules from source, installed driver snd-intel8x0, unmuted

icewm log out problem.

Hi folk. If I log out from icewm as CTRL+ALT+BACKSPACE I see that x-session-manager still run. I start icewm again, log out as CTRL+ALT+BACKSPACE, and I see now 2 running x-session-manager and so on ... x-session-manager is link to /usr/bin/icewm-session. If Ilog out as menu - it correct. How s

What Batch Systems have these possibilities?

Hi folk. I have some comps. And I need create some queues for using these comps in cluster. These queues must include different users. And each queues must have priority for using comps. For example: There are "A", "B", "C", "D", "E" comps. Queue1 include next comps: "A", "B", "C". Queue1 also incl

Problem with showing some fonts.

Hi folk. When I have partly upgraded my X (from woody to unstable) I can not see some symbols of "SIL Encore IPA" (SIxDIPA_.PFB) fonts in xfontsel and the programme which use those fonts. The pfaedit font editor and xfd show all symbols of this fonts. What must I do that correct this problem? Many

ACPI & button "reset"

Hi folk. I installed kernel 2.4.21 with support acpi & buttons. Machine shut down correctly when use "power" button. But there is other button - "reset" & I do not know how use it with ACPI. How can I reboot machine by button "reset" correctly with ACPI. Or may be this button switch off? Thanx. -

Problems with 2.6.X kernel.

Hi folk. Sometime I see these in my log & console. This was at once after booting system: kernel: hde: sata_error = 0x0008, watchdog = 1, siimage_mmio_ide_dma_test_irq kernel: irq 19: nobody cared! kernel: Call Trace: kernel: [__report_bad_irq+42/139] __report_bad_irq+0x2a/0x8b kernel: [not

About sensors on intel MB. How manage?

Hi folk. I want to ask you about sensors (first of all the temperatures & fans) on Intel SE7505 MB http://www.intel.com/design/servers/se7505vb2/index.htm?iid=ipp_srvr+mthrbds_se7505vb2_srvr&; I have 2xXEON CPU & 2xFAN on CPU (6000rpm), 2xFAN case & 2xFAN for HDD. These all FAN connect to MB, and

Mose Wheel Scroll and less.

Hi folk. How can I use wheel scrolling for man (less)? Thanx. -- Зарегистрируйте бесплатный почтовый ящик @inet.ua -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

dhcp & dynamic dnd updates

Hi folk. Can I update slave zone on my dns server from dhcp server? Now I have next problem: ... dhcpd: Unable to add forward map from node1.test.local.net to 192.168.1.30: timed out ... My dhcp server locate on one comp and dns server on another comp. dhcpd.conf: --- ddns-update-style int

kernel 2.6.x + hotplug + usb scanner - not work.

Hi folk. I have problem with using my USB Epson 2400 photo scanner. uname -r 2.6.6-rc1 lsusb | grep -i epson Bus 004 Device 002: ID 04b8:011b Seiko Epson Corp. Perfection 2400 Photo dpkg -l hotplug | grep ^i ii hotplug0.0.20040329-8 Linux Hotplug Scripts dpkg -l | grep libusb | grep ^i ii

Re: kernel 2.6.x + hotplug + usb scanner - not work.

> Hi folk. > I have problem with using my USB Epson 2400 photo scanner. > uname -r > 2.6.6-rc1 > lsusb | grep -i epson > Bus 004 Device 002: ID 04b8:011b Seiko Epson Corp. Perfection 2400 Photo ... > sane-find-scanner | grep -i epson > found USB scanner (vendor=0x04b8 [EPSON], product=0x011b [EPSON

Build X 3.3.6 version under etch

Hi folk. I try build old version of XFree86 (3.3.6-44 from http://archive.debian.org/debian-archive/ woody) under current etch. But there are problems with malloc function. For examle: efaxg42d.c efaxg42d.c: In function 'EncodeFaxG42D': efaxg42d.c:195: warning: implicit declaration of functi

Re[2]: Build X 3.3.6 version under etch

Hi Gerardo, Hi folk. > > I try build old version of XFree86 (3.3.6-44 from > http://archive.debian.org/debian-archive/ woody) under current etch. But > there are problems with malloc function. For examle: > > XFree86 3.3.6 is several years old. It probably must be compiled with > the gcc version

Re: Re[2]: Build X 3.3.6 version under etch

Hi folk. > > > > I try build old version of XFree86 (3.3.6-44 from > > > http://archive.debian.org/debian-archive/ woody) under current etch. But > > > there are problems with malloc function. For examle: > > > > > > XFree86 3.3.6 is several years old. It probably must be compiled with > > >

xdm & ctrl+alt+backspase

Hi folk. When I do several times ctrl+alt+backspase in X (I want ot restart X session), than xdm kill. How can I solve this problem. Or how can I manage it is working xdm or not? If xdm not works, then restart it. Thanx. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsub

udev and some usb mouses.

Hi folk. I have two identical usb mouse which pluged to one comp with two head. I use Xorg 6.9.0.dfsg.1-2 and udev 0.086-1 and kernel 2.6.15.5 In xorg.conf I write rules for this usb mouse as Driver "mouse" Option "ZAxisMapping" "4 5" Option "Device" "/dev

Re: udev and some usb mouses.

Hi, > > I have two identical usb mouse which pluged to one comp with two head. > > I use Xorg 6.9.0.dfsg.1-2 and udev 0.086-1 and kernel 2.6.15.5 > > > > In xorg.conf I write rules for this usb mouse as > > Driver "mouse" > > Option "ZAxisMapping" "4 5" > > Option "Device" "/dev/input/mouse0"

Re: udev and some usb mouses.

Hi. > > > > I try for example in /etc/udev/local.rules (symlink from > > > > /etc/udev/rules.d/@z10_local.rules): > > > > BUS=="input", SYSFS{phys}=="usb-:00:1d.0-2/input0", > > > > SYSFS{name}=="Genius NetScroll + Traveler", KERNEL=="mouse?", > > > > NAME="input/%k", MODE="0660", SYMLIN

Printing & CUPS & filters.

Hi folk. Some questions: 1. Are there anywhere repositories of cups filters in public? The debian cupsys package only have some few filters and supported file formats. For exapmle we need filters for raster pcx and tga image to postscript or pcl. (We had a try for writing these

Re: Printing & CUPS & filters.

Hi Olive. > > 1. Are there anywhere repositories of cups filters in public? > > The debian cupsys package only have some few filters > > and supported file formats. For exapmle we need filters > > for raster pcx and tga image to postscript or pcl. > > (We had a try for writing t