Hi folk.
Sometime I see these in my log & console.
This was at once after booting system:
kernel: hde: sata_error = 0x00080000, watchdog = 1,
siimage_mmio_ide_dma_test_irq
kernel: irq 19: nobody cared!
kernel: Call Trace:
kernel: [__report_bad_irq+42/139] __report_bad_irq+0x2a/0x8b
kernel: [note_interrupt+111/159] note_interrupt+0x6f/0x9f
kernel: [do_IRQ+353/402] do_IRQ+0x161/0x192
kernel: [common_interrupt+24/32] common_interrupt+0x18/0x20
kernel: [default_idle+0/44] default_idle+0x0/0x2c
kernel: [default_idle+41/44] default_idle+0x29/0x2c
kernel: [cpu_idle+51/60] cpu_idle+0x33/0x3c
kernel: [start_kernel+396/443] start_kernel+0x18c/0x1bb
kernel: [unknown_bootoption+0/272] unknown_bootoption+0x0/0x110
kernel:
kernel: handlers:
kernel: [ide_intr+0/459] (ide_intr+0x0/0x1cb)
kernel: [ide_intr+0/459] (ide_intr+0x0/0x1cb)
kernel: [__crc_pm_idle+1092683/3716410] (usb_hcd_irq+0x0/0x67 [usbcore])
kernel: Disabling IRQ #19
kernel: irq 19: nobody cared!
kernel: Call Trace:
kernel: [__report_bad_irq+42/139] __report_bad_irq+0x2a/0x8b
kernel: [note_interrupt+111/159] note_interrupt+0x6f/0x9f
kernel: [do_IRQ+353/402] do_IRQ+0x161/0x192
kernel: [common_interrupt+24/32] common_interrupt+0x18/0x20
kernel: [default_idle+0/44] default_idle+0x0/0x2c
kernel: [default_idle+41/44] default_idle+0x29/0x2c
kernel: [cpu_idle+51/60] cpu_idle+0x33/0x3c
kernel: [printk+417/491] printk+0x1a1/0x1eb
kernel: [print_cpu_info+133/207] print_cpu_info+0x85/0xcf
kernel:
kernel: hde: sata_error = 0x00080000, watchdog = 1,
siimage_mmio_ide_dma_test_irq
kernel: Call Trace:
kernel: [__report_bad_irq+42/139] __report_bad_irq+0x2a/0x8b
kernel: [note_interrupt+111/159] note_interrupt+0x6f/0x9f
kernel: [do_IRQ+353/402] do_IRQ+0x161/0x192
kernel: [common_interrupt+24/32] common_interrupt+0x18/0x20
kernel: [default_idle+0/44] default_idle+0x0/0x2c
kernel: [default_idle+41/44] default_idle+0x29/0x2c
kernel: [cpu_idle+51/60] cpu_idle+0x33/0x3c
kernel: [start_kernel+396/443] start_kernel+0x18c/0x1bb
kernel: [unknown_bootoption+0/272] unknown_bootoption+0x0/0x110
kernel:
kernel: Call Trace:
kernel: [__report_bad_irq+42/139] __report_bad_irq+0x2a/0x8b
kernel: [note_interrupt+111/159] note_interrupt+0x6f/0x9f
kernel: [do_IRQ+353/402] do_IRQ+0x161/0x192
kernel: [common_interrupt+24/32] common_interrupt+0x18/0x20
kernel: [default_idle+0/44] default_idle+0x0/0x2c
kernel: [default_idle+41/44] default_idle+0x29/0x2c
kernel: [cpu_idle+51/60] cpu_idle+0x33/0x3c
kernel: [printk+417/491] printk+0x1a1/0x1eb
kernel: [print_cpu_info+133/207] print_cpu_info+0x85/0xcf
kernel: Call Trace:
kernel: [__report_bad_irq+42/139] __report_bad_irq+0x2a/0x8b
kernel: [note_interrupt+111/159] note_interrupt+0x6f/0x9f
kernel: [do_IRQ+353/402] do_IRQ+0x161/0x192
kernel: [common_interrupt+24/32] common_interrupt+0x18/0x20
kernel: [__do_softirq+66/170] __do_softirq+0x42/0xaa
kernel: [do_softirq+45/47] do_softirq+0x2d/0x2f
kernel: [do_IRQ+318/402] do_IRQ+0x13e/0x192
kernel: [common_interrupt+24/32] common_interrupt+0x18/0x20
kernel: [schedule+0/1718] schedule+0x0/0x6b6
kernel: [need_resched+39/50] need_resched+0x27/0x32
kernel: [default_idle+0/44] default_idle+0x0/0x2c
kernel: [default_idle+41/44] default_idle+0x29/0x2c
kernel: [cpu_idle+51/60] cpu_idle+0x33/0x3c
kernel: [printk+417/491] printk+0x1a1/0x1eb
kernel: [print_cpu_info+133/207] print_cpu_info+0x85/0xcf
This was before:
kernel: Call Trace:
kernel: [__report_bad_irq+42/139] __report_bad_irq+0x2a/0x8b
kernel: [note_interrupt+111/159] note_interrupt+0x6f/0x9f
kernel: [do_IRQ+353/402] do_IRQ+0x161/0x192
kernel: [common_interrupt+24/32] common_interrupt+0x18/0x20
kernel: [default_idle+0/44] default_idle+0x0/0x2c
kernel: [default_idle+41/44] default_idle+0x29/0x2c
kernel: [cpu_idle+51/60] cpu_idle+0x33/0x3c
kernel: [start_kernel+396/443] start_kernel+0x18c/0x1bb
kernel: [unknown_bootoption+0/272] unknown_bootoption+0x0/0x110
kernel:
kernel: hde: dma_timer_expiry: dma status == 0x64
kernel: hde: DMA interrupt recovery
kernel: hde: lost interrupt
kernel: Call Trace:
kernel: [__report_bad_irq+42/139] __report_bad_irq+0x2a/0x8b
kernel: [note_interrupt+111/159] note_interrupt+0x6f/0x9f
kernel: [do_IRQ+353/402] do_IRQ+0x161/0x192
kernel: [common_interrupt+24/32] common_interrupt+0x18/0x20
kernel: [default_idle+0/44] default_idle+0x0/0x2c
kernel: [default_idle+41/44] default_idle+0x29/0x2c
kernel: [cpu_idle+51/60] cpu_idle+0x33/0x3c
kernel: [printk+417/491] printk+0x1a1/0x1eb
kernel: [print_cpu_info+133/207] print_cpu_info+0x85/0xcf
This I try read my tape cartridge
kernel: dd: page allocation failure. order:6, mode:0xd0
kernel: Call Trace:
kernel: [__alloc_pages+690/751] __alloc_pages+0x2b2/0x2ef
kernel: [__crc_pm_idle+917131/3716410] enlarge_buffer+0xcf/0x182 [st]
kernel: [__crc_pm_idle+922205/3716410] st_map_user_pages+0x37/0x82 [st]
kernel: [__crc_pm_idle+903901/3716410] setup_buffering+0xb9/0x13d [st]
kernel: [__crc_pm_idle+907372/3716410] st_read+0xe4/0x372 [st]
kernel: [vfs_read+176/281] vfs_read+0xb0/0x119
kernel: [sys_read+66/99] sys_read+0x42/0x63
kernel: [syscall_call+7/11] syscall_call+0x7/0xb
cat /proc/interrupts:
CPU0 CPU1 CPU2 CPU3
0: 32311793 0 0 0 IO-APIC-edge timer
1: 2102 0 0 0 IO-APIC-edge i8042
2: 0 0 0 0 XT-PIC cascade
8: 1 0 0 0 IO-APIC-edge rtc
9: 0 0 0 0 IO-APIC-level acpi
12: 19837 0 0 0 IO-APIC-edge i8042
14: 19 0 0 0 IO-APIC-edge ide0
16: 0 0 0 0 IO-APIC-level uhci_hcd
18: 0 0 0 0 IO-APIC-level uhci_hcd
19: 18362 0 0 0 IO-APIC-level ide2, ide3,
uhci_hcd
22: 15 0 0 0 IO-APIC-level dc395x
23: 119 0 0 0 IO-APIC-level ehci_hcd
52: 84137 0 0 0 IO-APIC-level eth0
NMI: 1 0 0 0
LOC: 32313090 32313089 32313088 32313087
ERR: 0
MIS: 0
lspci -v for IRQ 19:
0000:00:1d.1 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #2 (rev 02)
(prog-if 00 [UHCI])
Subsystem: Intel Corp.: Unknown device 3422
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at 6820 [size=32]
0000:05:04.0 RAID bus controller: CMD Technology Inc Silicon Image SiI 3112
SATARaid Controller (rev 02)
Subsystem: Intel Corp.: Unknown device 3422
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
I/O ports at 8860
I/O ports at 8854 [size=4]
I/O ports at 8858 [size=8]
I/O ports at 8850 [size=4]
I/O ports at 8840 [size=16]
Memory at f0323000 (32-bit, non-prefetchable) [size=512]
Capabilities: [60] Power Management version 2
dmesg | grep -i -3 "IRQ 19":
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
SiI3112 Serial ATA: IDE controller at PCI slot 0000:05:04.0
SiI3112 Serial ATA: chipset revision 2
SiI3112 Serial ATA: 100% native mode on irq 19
ide2: MMIO-DMA , BIOS settings: hde:DMA, hdf:DMA
ide3: MMIO-DMA , BIOS settings: hdg:DMA, hdh:DMA
hde: WDC WD2000JD-00GBB0, ATA DISK drive
ide2 at 0xf8850080-0xf8850087,0xf885008a on irq 19
hdg: WDC WD2000JD-00GBB0, ATA DISK drive
ide3 at 0xf88500c0-0xf88500c7,0xf88500ca on irq 19
hde: max request size: 64KiB
hde: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63,
UDMA(100)
hde: hde1 hde2 hde3 hde4 < hde5 hde6 hde7 hde8 hde9 >
--
hub 1-0:1.0: enabling power on all ports
uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB USB (Hub #2)
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 19, io base 00006820
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: root hub device address 1
lsmod:
Module Size Used by
sr_mod 19492 0
ehci_hcd 39556 0
uhci_hcd 31756 0
eeprom 8200 0
w83781d 34048 0
i2c_isa 2688 0
i2c_i801 8720 0
i2c_sensor 3584 2 eeprom,w83781d
i2c_core 23940 5 eeprom,w83781d,i2c_isa,i2c_i801,i2c_sensor
usb_storage 30464 1
usbcore 115932 5 ehci_hcd,uhci_hcd,usb_storage
st 41372 0
ide_cd 42756 0
cdrom 39840 2 sr_mod,ide_cd
uname -a:
Linux 2.6.6-rc1 #1 SMP Tue May 11 01:04:31 EEST 2004 i686 GNU/Linux
What is this & who can this resolve?
Thanx.
PS: Please, not reply my, only debian list.
--
Зарегистрируйте бесплатный почтовый ящик @inet.ua
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
