Hi folk.
I want to ask you about sensors (first of all the temperatures & fans) on
Intel SE7505 MB
http://www.intel.com/design/servers/se7505vb2/index.htm?iid=ipp_srvr+mthrbds_se7505vb2_srvr&;
I have 2xXEON CPU & 2xFAN on CPU (6000rpm), 2xFAN case & 2xFAN for HDD.
These all FAN connect to MB, and I can see they rpm & temperature of CPU from
BIOS
(two temperatures, six fan's rpm).
But can I want to manage they RPM & Tempo. I can see only one fan's rpm for
CPU,
one fans rpm for case & one for HDD:
output from sensors:
w83627hf-isa-0290
Adapter: ISA adapter
HDD Fan: 2721 RPM (min = 2008 RPM, div = 8)
Back Fan: 2109 RPM (min = 2008 RPM, div = 8)
CPU1 Fan: 5625 RPM (min = 4017 RPM, div = 4)
temp1: +19C (high = +127C) sensor = thermistor
temp2: +29.0C (high = +80C, hyst = +75C) sensor = PII/Celeron diode
temp3: +25.5C (high = +80C, hyst = +75C) sensor = PII/Celeron diode
w83627hf-i2c-0-2c
Adapter: SMBus I801 adapter at 1100
HDD Fan: 2721 RPM (min = 2008 RPM, div = 8)
Back Fan: 2163 RPM (min = 2008 RPM, div = 8)
CPU1 Fan: 5720 RPM (min = 4017 RPM, div = 4)
temp1: +19C (high = +127C) sensor = thermistor
temp2: +29.0C (high = +80C, hyst = +75C) sensor = PII/Celeron diode
temp3: +25.5C (high = +80C, hyst = +75C) sensor = PII/Celeron diode
lsmod:
eeprom 8200 0
w83781d 34048 0
i2c_isa 2688 0
i2c_i801 8720 0
i2c_sensor 3584 2 eeprom,w83781d
i2c_core 23940 5 eeprom,w83781d,i2c_isa,i2c_i801,i2c_sensor
lspci -vv:0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBM (ICH4) SMBus Controller
(rev 02)
Subsystem: Intel Corp.: Unknown device 3422
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 1100 [size=32]
0000:00:1f.0 ISA bridge: Intel Corp. 82801DB (ICH4) LPC Bridge (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
For these MB FANs are very noisy and I want to see they rpm's for manage.
How can I use all (6) output for fan's rpm. Can I do for this chipset?
I found that this chipset may manage only 3 parameters for fan (from
lm-sensors package). But I can see all six parameters in BIOS.
Kernel 2.6.6.-rc1, libsensors3 2.8.6-9, lm-sensors 2.8.6-9
Thanx.
--
Зарегистрируйте бесплатный почтовый ящик @inet.ua
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
